• Proceedings of the Optical Society of Korea Conference
• /
• 1997.08a
• /
• pp.17-17
• /
• 1997

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1082-1089
• /
• 2004

In this paper, miniaturization of an elliptic-response open-loop resonator filter and design flexibility using similarity transformation of the coupling matrix are proposed. Moreover, the filter with wider fractional bandwidth is designed by the proposed method. In order to verify the proposed method, three 4th-order elliptic-response open-loop resonator filters with a relative bandwidth of 4 % at the center frequency of 2.0 GHz are designed. One is realized with constant-width microstrip line resonator and the others are implemented with different-width microstrip line resonator. Compared with the former one, the latter have shown the size reduction of 13 % and 25 %, respectively. Since it may not be possible to implement the resonators with very narrow spacing for the required coupling coefficient filters with two different configurations representing same response characteristic through similarity transformation of the coupling matrix are proposed. From this design flexibility, a filter with a relative bandwidth of 8 % at the center frequency of 2.0 GHz is designed with realizable design parameters.

• Korean Journal of Optics and Photonics
• /
• v.26 no.1
• /
• pp.9-16
• /
• 2015

We have developed ellipsometry lidar and measured aerosol and ice-cloud characteristics. To measure a full normalized backscattering phase matrix (NBSPM) composed of nine elements, we have designed an optical system with three kinds of transmission and three kinds of reception, composed of ${\lambda}/2$ waveplate, ${\lambda}/4$ waveplate and empty optic. To find systematic optical errors, we used clean day middle-altitude (4-6km) lidar signals for which the aerosol's concentration was small and its orientation chaotic. After calibrating our lidar system, we have calculated NBSPM elements scattered from an aerosol and from an ice cloud. In the case of an aerosol, we found that the off-diagonal values $m_{12},{\ldots},m_{34}$ of the NBSPM are smaller than those for a cirrus cloud. Also, the off-diagonal values of the NBSPM from a cirrus cloud depend on atmospheric conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.531-539
• /
• 2011

It has been widely acknowledged that climate system associated with extreme rainfall events was difficult to understand and extreme rainfall simulation in climate model was more difficult. This study developed a new model for extracting rainfall filed associated with extreme events as a way to characterize large scale climate system. Main interests are to derive location, size and direction of the rainfall field and this study developed an algorithm to extract the above characteristics from global climate data set. This study mainly utilized specific humidity and wind vectors driven by NCEP reanalysis data to define the rainfall field. Geometric first and second moments have been extensively employed in defining the rainfall field in selected zone, and an ellipsoid based model were finally introduced. The proposed geometric moments based ellipsoid model works equally well with regularly and irregularly distributed synthetic grid data. Finally, the proposed model was applied to space-time real rainfall filed. It was found that location, size and direction of the rainfall field was successfully extracted.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.207-216
• /
• 2016

A gerotor is suitable for miniature manufacturing because it has high discharge per 1 cycle and a simple structure, while also being widely used for lubrication oil of engines and as a hydraulic source of automatic transmission. In the automobile industry, improvements in fuel efficiency and noise reduction have recently come to the fore. It has also been necessary to continuously improve the flow rate and noise of internal gear pumps for better fuel efficiency through optimal gerotor and port shape design. In this study, to develop an optimal gerotor with a new lobe shape, 2-ellipses-combined, the equation of the lobe shape was derived, and CFD analysis results were compared for 2-ellipses with those of the previous gerotors (3-ellipses and ellipse1-involuteellipse2). A performance test for the oil pump with the optimal rotor (2-ellipses) was carried out and showed good agreement with the results obtained from CFD analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1278-1284
• /
• 2010

In this paper, we propose a new mura detection algorithm for TFT-LCD effectively, which is based on multi-point, 2-dimensional FFT. Since mura in TFT-LCD has a certain area shape, it is seen as a sin wave in a LCD line. Since shapes of mura can be seen a circle, horizontal oval, or vertical oval, it is shown that they can be detected by 2-dimensional FFT easily. Through simulation for test image, it is shown that proposed algorithm can detect various sizes of mura. The proposed algorithm can be utilized in automatic test equipment for effective TFT-LCD mura detection.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.252-256
• /
• 2001

We performed spectroscopic ellipsometry measurement to obtain dielectric function(DF) of ZnSe at room temperature. Proper wet chemical etching procedure was carried out to remove overlayers on top of ZnSe, and our result indicates that the previous reports on the pure DF of ZnSe have inaccurate interpretations. We constructed DF of oxide on ZnSe by using reported DFs of amorphous-Se, $GaAsO_3$, and voids through Bruggeman effective-medium approximation.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.43-48
• /
• 2008

This paper proposes a new method for measuring the power of spherical and cylindrical lens with 6 points light source, which is composed of a LED and six holes, and magnification ellipse fitting algorithm. Each measured diagonal length of 6 points light source is determined by the target lens power. After finding the center position of each light point with threshold method, 3 axis-diagonal lengths were calculated. The long axis and short axis power of cylindrical lens can be calculated by using magnification ellipse fitting algorithm with the magnification relationships between the initial diagonal lengths and the measured diagonal lengths changed by lens power.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.246-249
• /
• 2000

The null lens is designed for testing the elliptical (conic constant>O) mirror which is the third mirror of the off-axis Three Mirror Anastigmat (TMA) designed as a high resolution camera for remote sensing. The mixed type design is proposed as a new design type which has a small annular flat mirror, but has as twice sensitivity as the autostigmatic type design. It is also shown that the null lens of the Mixed type is better than that of the autostigmatic type in terms of the sensitivity of the wavefront distortion which is given as the magnitude of optical path difference with respect to the change of each surface parameters such as the radius of curvature, thickness of lenses and tested mirror.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.285-289
• /
• 1995

This paper describes the determination of geoid using height data measured by GPS and Spirit Levelling. The GPS data of the 88 stations were used to determine the geoid undulation (N) which can be easily obtained by subtracting the orthometric height(H) from the ellipsoidal height(h). From the geoid undulation (N) calculated at each station mentioned above, geoid plots with a contour interval of 0.25 m were drawn using two interpolation methods. The following interpolation methods were applied and compared with each other: Minimum Curvature Method and Least Squares Fitted Plane. Comparison between geometric geoid and gravimetric geoid undulation by FFT technique was carried out.