• 한국전자파학회논문지
• /
• 제13권5호
• /
• pp.451-458
• /
• 2002

6-18 GHz 주파수대역에서 사용되는 흡수형의 SP3T 및 SP8T 스위치 모듈을 설계 및 제작하였다. 스위치 모듈에 사용된 MMIC 칩의 에피구조는 저 손실과 고 전력용으로 설계되었다. 최대입력전력은 SP3T 스위치 모듈이 2 W이고 SP8T 스위치 모듈이 1 W이다. 200 nsec의 고속 스위칭을 위한 구동회로를 모듈에 내장하였다. 모듈의 최대삽입손실은 SP3T 및 SP8T에 대해 각각 2.8 dB, 4.2 dB로 측정되었다. 입ㆍ출력포트간 분리도는 모두 55 dB 이상을 얻을 수 있었다. 두 스위치 모듈은 전자전 시스템에 적용하기 위한 관련 환경시험을 모두 통과하였다.

• 연구논문집
• /
• 통권29호
• /
• pp.57-67
• /
• 1999

This paper presents the status quo of the development of a piecewise bendable switch system for the urban transit MagLev. MagLev system as well as railroad requires switch systems to reach its destination. Requirements of the switch system for commercial lines are high speed operation satisfying about 2-3 minute headway and system reliability, etc. Parallel moving type switch system was installed on the test track of urban transit MagLev in KIMM. In this system, switch operation from one position to another can be done in about 90 seconds. Therefore, we concluded that this system can not satisfy the headway for the commercial lines. We decided to develop a high speed piecewise bendable switch system in which switching can be done in 20 seconds. Designed switch system is very complicated in view of operating mechanism. It consists of 11 segmented girder beams driven by hydraulic cylinders. To gain the idea of a piecewise bendable switch system, we manufactured and tested a 1/5 scale switch model. We are going to construct a full scale piecewise bendable switch system next year.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.158-161
• /
• 1999

This Paper proposes the architecture of WDM(wavelength division multiplexed) based large scale photonic packet switch network, which is composed of the FC(frequency converter) and OM (output module). The features of the proposed WDM based photonic packet switch network are 2-stage switch network, and WDM based internal optical link that is connected between FC and OM. This paper evaluates the internal call blocking characteristics of the photonic packet switch network. In results, we confirmed that the proposed WDM based photonic packet switch network has the potentiality in the practical implementation.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.323-333
• /
• 2017

This paper proposes a model-based optimal control algorithm for the clamp switch of a zero-voltage switching (ZVS) bidirectional DC-DC converter. The bidirectional DC-DC converter (BDC) can accomplish the ZVS operation using the clamp switch. The minimum current for the ZVS operation is maintained, and the inductor current is separated from the input and output voltages by the clamp switch in this topology. The clamp switch can decrease the inductor current ripple, switching loss, and conduction loss of the system. Therefore, the optimal control of the clamp switch is significant to improve the efficiency of the system. This paper proposes a model-based optimal control algorithm using phase shift in a micro-controller unit. The proposed control algorithm is demonstrated by the results of PSIM simulations and an experiment conducted in a 1-kW ZVS BDC system.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2007년도 춘계학술대회 학술발표 논문집 제17권 제1호
• /
• pp.485-488
• /
• 2007

최근 Analog Sampled-Data 신호처리를 위하여 주목되고 있는 SI(Switched-Current) circuit은 저전력 동작을 하는 장점이 있지만, 반면에 SI circuit에서의 기본 회로인 Current Memory는 Charge Injection에 의한 Clock Feedthrough이라는 치명적인 단점을 갖고 있다. 따라서 본 논문에서는 Current Memory의 문제점인 Clock Feedthrough의 일반적인 해결방안으로 Dummy Switch의 연결을 검토하였고, Austria Mikro Systeme(AMS)에서 $0.35{\mu}m$ CMOS process BSIM3 Model로 제작하기 위하여 Current Memory의 Switch MOS와 Dummy Switch MOS의 적절한 Width을 정의하여야 하므로, 그 값을 도출하였다. Simulation 결과, Switch의 Width는 $2{\mu}m$, Dummy Switch의 Width는 $2.35{\mu}m$로 정의될 수 있음을 확인하였다.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.90-94
• /
• 2013

A low loss power dividing switch in a indoor microwave power distribution system is proposed and designed with a various power dividing ratio. Switching characteristics are analyzed by use of the S-parameter of the switch. Newly proposed switch showed a very low return loss less than -30dB at the operating frequency of 2.45GHz. Three kinds of the switch in which we take out individually 1/2, 1/3 and 1/4 of the input power were fabricated, and measured the delivered, transmitted, and return loss power ratio. Simulated results showed that the lower power ratio is, the better accurate operating performance shows. This switch can switch the input power from 4.5% to 58% with the variance of 5% output power. The experimental results are in good agreement with the simulation within the return loss of 1%.

• 센서학회지
• /
• 제20권2호
• /
• pp.77-81
• /
• 2011

This paper presents a single-pole eight-throw(SP8T) switch based on proposed a radio-frequency(RF) microelectromechanical systems (MEMS) switches. The proposed switch was driven by a double stop(DS) comb drive, with a lateral resistive contact. Additionally, the proposed switch was designed to have tapered signal line and bi-directionally actuated. A forward actuation connects between signal lines and contact part, and the output becomes on-state. A reverse actuation connects between ground lines and contact part, and the output becomes off-state. The SP8T switch of 3-stage tree topology was developed based on an arrangement of the proposed RF MEMS switches. The developed SP8T switch had an actuation voltage of 12 V, an insertion loss of 1.3 dB, a return loss of 15.1 dB, and an isolation of 31.4 dB at 6 GHz.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.411-414
• /
• 2014

A switch is one of the most useful circuits for controlling the path of signal transmission. It can be added to digital circuits to create a kind of gate-level device and it can also save information into memory. In RF subsystems, a switch is used in a different way than its general role in digital circuits. The most important characteristic to consider when designing an RF switch is keeping the isolation as high as possible while also keeping insertion loss as low as possible. For high isolation, we propose leakage signal cancellation and inductive switching for designing a singlepole double-throw (SPDT) RF switch. By using the proposed method, an isolation level of more than 23 dB can be achieved. Furthermore, the heterojunction bipolar transistor (HBT) process is used in the RF switch design to keep the insertion loss low. It is demonstrated that the proposed RF switch has an insertion loss of less than 2 dB. The RF switch operates from 1 to 8 GHz based on the $0.18-{\mu}m$ SiGe HBT process, taking up an area of $0.3mm^2$.

• Management Science and Financial Engineering
• /
• 제4권2호
• /
• pp.43-58
• /
• 1998

Packet switch is a key component in high speed digital networks. This paper investigates congestion phenomena in the packet switching with input buffers. For large value of switch size N, mathematical models have been developed to analyze asymptotic maximum switch throughput under nonuniform traffic. Simulation study has also been done for small values of finite N. The rapid convergence of the switch performance with finite switch size to asymptotic solutions implies that asymptotic analytical solutions approximate very closely to maximum throughputs for reasonably large but finite N. Numerical examples show that non-uniformity in traffic pattern could result in serious degradation in packet switch performance, while the maximum switch throughput is 0.586 when the traffic load is uniform over the output trunks. Window scheduling policy seems to work only when the traffic is relatively uniformly distributed. As traffic non-uniformity increases, the effect of window size on throughput is getting mediocre.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제12B권1호
• /
• pp.37-43
• /
• 2002

This paper proposes a new zero-current switching (ZCS) pulse-width modulation (PWM) switch cell that has no additional conduction loss of the main switch. In this cell, the main switch and the auxiliary switch turn on and turn off under zero current condition. The diodes commutate softly and the reverse recovery problems are alleviated. The conduction loss and the current stress of the main switch are minimized, since the resonating current for the soft switching does not flow through the main switch. Based on the proposed ZCS PWM switch cell, a new family of dc to dc PWM converters is derived. The new family of ZCS PWM converters is suitable for the high power applications employing IGBTs. Among the new family of dc to dc PWM converters, a boost converter was taken as an example and has been analyzed. Design guidelines with a design example are described and verified by experimental results from the 2.5㎾ prototype boost converter operating at 40KHz.