• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.126-142
• /
• 2016

This paper presents a wide-frequency-range, low-power transceiver with an automatic impedance-matching calibration for TV-white-space (TVWS) application. The wide-range automatic impedance matching calibration (AIMC) is proposed for the Drive Amplifier (DA) and LNA. The optimal $S_{22}$ and $S_{11}$ matching capacitances are selected in the DA and LNA, respectively. Also, the Single Pole Double Throw (SPDT) switch is integrated to share the antenna and matching network between the transmitter and receiver, thereby minimizing the systemic cost. An N-path filter is proposed to reject the large interferers in the TVWS frequency band. The current-driven mixer with a 25% duty LO generator is designed to achieve the high-gain and low-noise figures; also, the frequency synthesizer is designed to generate the wide-range LO signals, and it is used to implement the FSK modulation with a programmable loop bandwidth for multi-rate communication. The TVWS transceiver is implemented in $0.13{\mu}m$, 1-poly, 6-metal CMOS technology. The die area of the transceiver is $4mm{\times}3mm$. The power consumption levels of the transmitter and receiver are 64.35 mW and 39.8 mW, respectively, when the output-power level of the transmitter is +10 dBm at a supply voltage of 3.3 V. The phase noise of the PLL output at Band 2 is -128.3 dBc/Hz with a 1 MHz offset.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.15-21
• /
• 2011

In this paper, an energy management circuit for solar energy harvesting system is designed in $0.35{\mu}m$ CMOS technology. The solar energy management system consists of an ISC(Integrated Solar Cell), a voltage booster, and an MPPT(Maximum Power Point Tracker) control unit. The ISC generates an open circuit voltage of 0.5V and a short circuit current of $15{\mu}A$. The voltage booster provides the following circuit with a supply voltage about 1.5V. The MPPT control unit turns on the pMOS switch to provide the load with power while the ISC operates at MPP. The SEMU(Solar Energy Management Unit) area is $360{\mu}m{\times}490{\mu}m$ including pads. The ISC area is $500{\mu}m{\times}2000{\mu}m$. Experimental results show that the designed SEMU performs proper MPPT control for solar energy harvested from the ISC. The measured MPP voltage range is about 370mV∼420mV.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.49-58
• /
• 2010

The traffic signal controllers being used in the domestic currently are being manufactured based on the korean national police standard which was developed for controlling the quad-light traffic signal having the red, yellow, left-turn arrow, and green lights. But according to the national policy for the traffic operation, they have to be changed to be able to switch the tri-light signal having red, yellow and green lights. In this study, a new tri-light traffic signal controller was designed and developed by the way improving the Signal Control Unit of the existing quad-light standard traffic controller. The Load Signal Unit(LSU) was improved to output 6 signals which are the two assemblies of three signal indications having the red, yellow, and green lights. To enough traffic signals output to control each directional movements and the various transport modes which are car, bus, bike, and pedestrian etc., the connector bus system was designed to be able to accommodate maximum 96 signals outputs being constructed by 16 LSUs. Flasher device was developed to be able to support maximum 32 red signals. In the software, the communication protocol between traffic control center and the traffic signal controller was improved and new signal map code values were defined for the developed LSU controlling the quad-light traffic signal. A model of the quad-light traffic signal controller developed and was tested three operations, protocol-operation, remote-command and control-mode. The test result operated all of them successfully.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.834-843
• /
• 2016

In this paper, the design of a PIN diode S-band transfer-type SP4T including its driver circuit is presented. Each path of the SP4T is composed of the cascade connection of series-shunt PIN diodes to improve the isolation performance. The SP4T is implemented using chip type PIN diodes and a 20 mil AIN substrate fabricated using thin film technology. The driver circuit for the SP4T is designed using a multiplexer and four NMOS-PMOS push-pull pair. From on-wafer measurement, the fabriacted SP4T shows a maximum insertion loss of 1.1 dB and a minimum isolation of 41 dB. The time performance of the driver circuit is evaluated using the packaged PIN diodes with the identical PIN diode chip, and the transition time for on-off and off-on are below 100 nsec. For an input power level of 150 W, the measured insertion loss and isolation are close to those of the on-wafer measurement taking into consideration of the coaxial package mismatch and insertion loss.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.29-47
• /
• 2007

Owing to the rapid growth of using the Internet, not only click-and-mortar companies but also brick-and-mortar ones have been expanding their distribution channels into online, Moreover, since online channels are more attractive than offline ones in control and maintenance, switching customers into online ones is emerged as one of very important managerial issues in a view of reduction of cost as well as expansion of services. However, the switched customers should be faced by uncertainties which could not have been experienced in offline. Specifically, in online channels, buyers and sellers are separated temporally and spacially and there are always so many kinds of threat for security as well as not enough systems and conventions for them yet. Therefore, trust has been considered as one of the most critical mechanisms for resolution of such uncertainties in online transactions. However, it is not easy to build and maintain the relationships in online since most of them are virtual and indirect generally. Therefore, in order to switch offline customers into online ones, it is very important to make strategies based on identification of the relationship between online transaction and offline trust which has been built in offline business. Generally offline trust, which has been built independent of online, could not include trust for online-dependent activities such as payment security during or after transactions, while most of online trust include it. Therefore, a customer with high offline trust does not always perceive high security and assure safe transactions. Accordingly, while online trust, where technical capabilities for online security is one of main bases, includes control trust implicitly or explicitly, offline trust does not. However. in spite of such clear discrimination and independence between offline trust and perceived security, there can be the significant dependency between these two beliefs. The customers with high offline trust believe that the company would do some activities for online security for customers' safe transactions since it has been believed of doing well for customers' trust. Theoretically, users' perception of security is interpreted as a kind of control trus, which is trust for company's technical control capacities in order to resolve technical uncertainties in online. Therefore, the relationship between two beliefs can be considered as transference from offline trust to another type trust. that is, control trust. The objective of this study is to analyze the effect of offline trust on online transaction uses mediated by perceived security. For this purpose, we suggest a research model based on technology acceptance model (TAM). Reuse intention is adopted as a dependent variable and TAM is modified by adding perceived risk (PR) as well as two beliefs of using Internet banking, perceived usefulness (PU) and perceived ease of use (PEOU). Moreover, perceive security (PS) is adopted as an external variable for PR and PU, while offline trust (OT) is an antecedent of PS. For an empirical test, sampling from 108 visitors to the banks in Daegu, Korea, we analyze our model by partial least square (PLS) approach. In result, our model is shown to explain 51.4% of the variance in reuse intention and all hypothesis are supported statistically. A theoretical implication of this study is to identify a role of PS between offline trust and reuse intention of using online transaction services. According to our result, PS can be considered as a mediation variable for bridging between two different concepts: trust that explains social aspects of customers and companies, and TAM that explains customers' reuse intention.

• Information and Communications Magazine
• /
• v.14 no.12
• /
• pp.77-85
• /
• 1997

지금까지 access network에서의 xDSL의 위치를 살펴보고 DSL, HDSL, ADSL 및 VDSL을 중심으로 기술 및 최근의 표준화동향을 살펴보았다. ITU의 조사에 따르면 97년 기준으로 전세계 약 8억가구에 copper access line이 연결되어 있고 그중의 70%이상이 가정에 연결되어 있는데 증가추세도 북미의 경우 년3.5%, 서유럽과 태평양연안의 경우 년4.5%의 성장율을 보이고 있어 2000년경에는 10억가구에 다다를 전망이다. 미국은 97년기준 약 1억가구에 1억6000만 copper access line이 연결되어 있는데 Yankee Group이 조사한 바에 따르면 2000년을 기준으로 3백만가구에 ADSL/RADSL/SDSL이 연결되고 관련 revenue는 10억달러에 이를것으로 추산하고 있다. 전세계 xDSL 시장규모를 미국의 5배정도로 보면 2000년경에는 전세계 twist pair의 2%정도에 xDSL이 연결되어 ADSL/RADSL/SDSL 관련 세계시장규모가 50억달러에 이르고 시장성장률은 30%에 이를 것으로 보고 있다. 현재 이러한 xDSL의 표준화작업은 3장에서 언급한 바와 같이 ANSI T1, ETSI에서 주로 주도되고 있으나 ITU-T, IEEE, ADSL Forum, ATM Forum, DAVIC 등 다른 group과 활발한 liasion meeting 을 통해서도 협력안을 마련하려 노력하고 있다. 예를 들어 DAVIC은 long range(1.5Km이상) PMD규격으로 ADSL을, mid range($300m\sim1.5km$) PMD규격으로 VDSL을, short range(300m이하) PMD규격으로 CAP방식의 FTTC를 각각구정하여 xDSL을 수용하고 있다. Microsoft의 CEO인 Bill Gates가 'Bandwidth bottleneck. No question. that's the biggest obstacle.'이라고 천명한 바와 같이 정보사회로의 진전에 있어 bandwidth는 시급히 해결되어야 할 문제이다. 정보사회의 꿈을 실현하고자 1993년부터 시작된 In-formation Infrastructure의 구축노력이 그동안 다양하게 시도되어왔으나 숱한 우여곡절과 실패를 겪은 telco등의 서비스업자들이 이제는 너무 큰 꿈을 쫓기보다는 internet이라는 현실적인 시장에서 xDSL과 cablemodem을 바탕으로 차근차근 새로 시작하고 있다고 생각된다. 그동안 ADSL, Forum을 중심으로한 일부 technology evangelist들은 전세계 8억가구에 깔려있는 copper twist pair를 경제적인 'the last mile solution'으로 활용할 것을 줄기차게 주장해왔다. 그동안 xDSL은 VDSL이라는 차세대 대안을 제시하여 interim solution이라는 울타리를 벗어나는데 성공하였을 뿐만 아니라 IDSL, SDSL, RADSL등의 새로운 고객지향적 xDSL을 개발하여 선택의 폭을 넓혀주었다. xDSL vendor들간의 치열한 경쟁속에서 값싼 xDSL 시스템들이 속속 등장하고 있으며, DSLAM[8]과 같은 switch solution도 제시되어 기존의 copper twist pair를 이용해 값싸게 다양한서비스를 제공해 줄 수 있는 기틀을 마련한 것이 오늘날의 xDSL의 성공요인이라고 생각된다. 일찌기 Bell Atlantic의 CEO Ray Smith가 'Yes. ADSL is an interim solution that will be with us for forty years.'라고 간파한대로 xDSL은 fiber가 좀 더 값싼 해결책이 될 때까지 당분간 access network에서 확고한 자리를 구축할 것으로 보인다. 최근들어 우리나라의 초고속정보통신망도 ADSL 과 VDSL을 바탕으로 FTTH으로 진화하는 전략을 수립한것은 우리의 현실과 세계적인 추세를 반영한 일이라 여겨진다.

• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.25-52
• /
• 2012

In order to solve the current problems and inefficiencies within the Port Authorities(PA) in Korea, this study introduces the concept of the integration of PA and analyses the intention of integration. This study is based on analysing the surveys participated by the members of PA. The surveys consist of six main factors which could influence the intention of integration of PA; contribution, autonomy, strategic factor, financial factor, marketing factor and environmental factor. The two main implications from this study can be categorised as follows. First, this study identifies the structural problems such as regional self-centredness of PA, obscurity of organisations' roles and their rights, limitations on diversification of business and restrictions within PA. Second, this study extensively discusses the option of improving the inefficiency whilst maintaining the current system or to switch to the integration of PA. In addition, it has been found that individual PA recognise the little need for integration. Since the results show that the strategic, financial, marketing and environmental factors would cause both significant and little significant impacts, it would be too haste to decide on a conclusion. However, it is possible to say that the rapid integration of PA can neither improve the efficiency nor improve the characteristics of each region. Therefore, the significance of integration of PA must be further discussed from many different perspectives. The results of this research will serve as a basic literature for further studies on the integration of PA in Korea. Moreover, the problems that have been identified and analysed in this study will contribute to establishing the strategy for further development of PA in Korea.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.1
• /
• pp.55-62
• /
• 2007

Radical paring of the cleft edge during primary cleft lip operation or repeated secondary surgeries can result in tightness of the upper lip. In case, the degree of the resulting side-to-side tension is very severe, the possibility of a lip switch flap must be considered. When the lip tightness accompanies a loss of more than two-thirds of the Cupid's bow, an Abbe flap is an alternative. The disadvantages of Abbe flap are scar formation on the lower lip, design of incision line on the upper lip, disharmony of colors, and the dysfunction of the orbicularis muscle. These problems have been recognized in the literature and extreme discretion has been advised in its application. We experienced four cases of Abbe flap operation which were designed differently to correct the secondary unilateral or bilateral cleft-lip nasal deformities. The Abbe flap operations resulted in removal of the scars and tightness of the upper lip, reconstruction of the Cupid's bow, lengthening of the columella, and therefore secondary cleft-lip nasal deformity could be corrected. It is thought that carefully applied Abbe flap is an appropriate method to relieve horizontal tightness or flattening of the upper lip which occured after primary operation of cleft lip.

• Journal of Environmental Policy
• /
• v.13 no.2
• /
• pp.99-129
• /
• 2014

This research estimates the impact of population aging on energy use and carbon emissions by energy sources and by industrial sectors in Korea until 2035. For the estimation, the structural change in household consumption expenditure identified by the age-specific consumption pattern was analyzed in conjunction with energy and environment input-output tables. The estimation result presents that, despite the population aging, energy use and carbon emissions induced by household consumption continue to increase until 2026, and then that elevated levels of energy use and carbon emissions will be maintained for a considerable period of time. According to the estimation by energy sources, the use of natural gas will show substantial increase while the use of crude oil will switch to a downturn at a relatively early period. According to the estimation by industrial sectors, carbon emissions in the sectors with relatively high consumption share of old households such as medical health, dwelling, lighting, heating, air-conditioning, and food will have substantial increase, whereas those in the sectors associated with education, transport, catering, and accommodation services will turn downward relatively early. In addition, the study analyzes through policy simulation the impact of aging-related policy similar to the basic pension system, which is recently being discussed for legislation, on energy use and carbon emissions.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.385-390
• /
• 2006

This paper examines the sampling and jitter specifications and considerations for Global Navigation Satellite Systems (GNSS) software receivers. Software radio (SWR) technologies are being used in the implementation of communication receivers in general and GNSS receivers in particular. With the advent of new GPS signals, and a range of new Galileo and GLONASS signals soon becoming available, GNSS is an application where SWR and software-defined radio (SDR) are likely to have an impact. The sampling process is critical for SWR receivers, where it occurs as close to the antenna as possible. One way to achieve this is by BandPass Sampling (BPS), which is an undersampling technique that exploits aliasing to perform downconversion. BPS enables removal of the IF stage in the radio receiver. The sampling frequency is a very important factor since it influences both receiver performance and implementation efficiency. However, the design of BPS can result in degradation of Signal-to-Noise Ratio (SNR) due to the out-of-band noise being aliased. Important to the specification of both the ADC and its clocking Phase- Locked Loop (PLL) is jitter. Contributing to the system jitter are the aperture jitter of the sample-and-hold switch at the input of ADC and the sampling-clock jitter. Aperture jitter effects have usually been modeled as additive noise, based on a sinusoidal input signal, and limits the achievable Signal-to-Noise Ratio (SNR). Jitter in the sampled signal has several sources: phase noise in the Voltage-Controlled Oscillator (VCO) within the sampling PLL, jitter introduced by variations in the period of the frequency divider used in the sampling PLL and cross-talk from the lock line running parallel to signal lines. Jitter in the sampling process directly acts to degrade the noise floor and selectivity of receiver. Choosing an appropriate VCO for a SWR system is not as simple as finding one with right oscillator frequency. Similarly, it is important to specify the right jitter performance for the ADC. In this paper, the allowable sampling frequencies are calculated and analyzed for the multiple frequency BPS software radio GNSS receivers. The SNR degradation due to jitter in a BPSK system is calculated and required jitter standard deviation allowable for each GNSS band of interest is evaluated. Furthermore, in this paper we have investigated the sources of jitter and a basic jitter budget is calculated that could assist in the design of multiple frequency SWR GNSS receivers. We examine different ADCs and PLLs available in the market and compare known performance with the calculated budget. The results obtained are therefore directly applicable to SWR GNSS receiver design.