• Journal of applied mathematics & informatics
• /
• v.40 no.3_4
• /
• pp.507-513
• /
• 2022

In this paper, we investigate some results on complex delay-differential equations of the classical Malmquist theorem. A classic illustrations of their results states us that if a complex delay equation w(t + 1) + w(t - 1) = R(t, w) with R(t, w) rational in both arguments admits (concede) a transcendental meromorphic solution of finite order, then deg_wR(t, w) ≤ 2. Development and upgrade of such results are presented in this paper. In addition, Borel exceptional zeros and poles seem to appear in special situations.

• Ocean and Polar Research
• /
• v.24 no.3
• /
• pp.197-205
• /
• 2002

Total magnetic field and high-resolution bathymetric data were collected over nine seamounts to the northwest of the Marshall Islands in the western Pacific. Magnetic parameters including inclination and declination were calculated from the magnetic anomalies using inversion algorithm of Plouff (1976), and a corresponding paleomagnetic pole was determined with the magnetic parameters. The paleomagnetic poles determined in this study were compared with the previous apparent polar wander path (APWP) of Pacific plate. Most seamounts of the study area have normal polarity. The study reveals that all nine seamounts in the study area formed in the southern hemisphere during the Cretaceous based on their comparison with the APWP of Pacific plate. The ages estimated from paleomagnetic poles can be divided by age into three groups: the oldest (OSM1 and OSM3), middle age (OSM2, OSM4, and 6-2), and the youngest (OSM5-1, 5-2, 5-3, and 6-1). The fermer two groups and the latter seem to be coincident with two distinct pulses of Cretaceous volcanic activity (115-90 Ma and 83-65 Ma). As a whole the seamounts at southwest of the study area are older than at those northeast.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1164-1169
• /
• 2014

Overturning of concrete poles are occurred annually due to natural disaster such as a typhoon. The present code for the resisting moment and the safety on overturning of concrete poles in inclined ground is inadequate. In this study, the concept of the code for those in flat ground is applied to calculate the resisting moment in inclined ground using general analysis program L-Pile Plus13.8. According to the analytical results, the resisting moment in inclined ground is rapidly decrease as increasing the slope angle although the embedded depth are added by the additional embedded depth on the code. It is revealed that the capacity in inclined ground is equivalent to that in flat ground if additional embedded depth is increased from 1.5 to 3 times.

• Wind and Structures
• /
• v.18 no.2
• /
• pp.181-194
• /
• 2014

A major problem with high-mast light poles is the effects that wind vortex shedding can have on the pole itself because of the lock-in phenomenon. It is desired that the coefficients in the AASHTO Standard Specifications ($5^{th}$ edition) for Structural Supports for Highway Signs, Luminaries, and Traffic Signals be analyzed and refined. This is for the belief that the span of the shapes of poles for which the coefficients are used is much too broad and a specific coefficient for each different shape is desired. The primary objective of this study is to develop wind vortex shedding coefficient for a multisided shape. To do that, an octagonal shape was used as the main focus since octagonal cross sectioned high-mast light poles are one of the most common shapes in service. For the needed data, many wind parameters, such as the static drag coefficient, the slope of aerodynamic lift coefficient, Strouhal number, the lock-in range of wind velocities producing vibrations, and variation of amplitude of vortex-induced vibration with Scruton number are needed. From wind tunnel experiments, aerodynamic parameters were obtained for an octagonal shape structure. Even though aerodynamic coefficients are known from past test results, they need to be refined by conducting further wind tunnel tests.

• Asian review of World Histories
• /
• v.2 no.2
• /
• pp.169-195
• /
• 2014

This paper presents an investigation into cross-cultural transfiguration of Buddhist faith in Goryeo Dynasty, with a focus on $\acute{S}\bar{u}$raṃgama-s$\bar{u}$tra that used to be in vogue in East Asia. There are three major types of $\acute{S}\bar{u}$raṃgama-s$\bar{u}$tra faith in Goryeo: the first one was concerned about the scripture itself including its citation and publication and the compilation of its annotation books; the second one involved establishing Buddhist rituals related to the scripture; and the final one was to create Dh$\bar{a}$ran$\bar{i}$ stone poles with Dafoding Dh$\bar{a}$ran$\bar{i}$ in Volume 7 of the scripture engraved in stone. While it was the common practice to engrave Zunsheng Dh$\bar{a}$ran$\bar{i}$ in China, the number of stone poles on which Dafoding Dh$\bar{a}$ran$\bar{i}$ was engraved was overwhelmingly large. There are a couple of reasons behind the difference: first, there was a tendency of Zunsheng Dh$\bar{a}$ran$\bar{i}$ being worshiped at the national level in Goryeo, which probably explains why the percentage of Zunsheng Dh$\bar{a}$ran$\bar{i}$ stone poles designed to pray for a personal mass for the dead by engraving Dh$\bar{a}$ran$\bar{i}$ on a stone pole was considerably low. In addition, there were esoteric sects in Goryeo, and it is estimated that they must have got involved in the establishment of Dafoding Dh$\bar{a}$ran$\bar{i}$ stone poles in the former half of Goryeo. Furthermore, the Zen sects had a deep non-Zen understanding of Esoteric Buddhism and tended to practice Dh$\bar{a}$ran$\bar{i}$ in Goryeo. It is estimated that Dafoding Dh$\bar{a}$ran$\bar{i}$ stone poles were set up in large numbers in Goryeo as the prevalence of $\acute{S}\bar{u}$raṃgama-s$\bar{u}$tra faith that continued on since the former half of Goryeo was combined with the Zen sects' active position about Dh$\bar{a}$ran$\bar{i}$.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.62-65
• /
• 2003

본 연구는 탐지대상물체의 형상인식이 가능한 비접촉, 원격 탐지장치의 개발에 관한 것이다. 본 연구에서는 2극 또는 4극의 정자기장을 인가할 때 탐지대상 물체에 의한 자기장의 자계 왜곡을 홀 센서로 감지하여 탐지 대상 물체를 인식하는 원격 감지 시스템을 설계하고 제작하여 특성을 분석한 결과 2극과 4극 시스템 모두 비 투자율의 변화를 감지 할 수 있었고, 특히 탐사물체의 위치 파악에는 2극 시스템이 4극 시스템에 비하여 좋은 특성을 보였다.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.383-393
• /
• 1993

Paleomagnetic data have been obtained from the Lower Triassic Tonggo formation which is exposed in the E-W trending Baekunsan syncline comprising the Pyongan Supergroup in eastern Korea. Two ancient components of magnetization are recovered in this formation by detailed thermal demagnetization: a post-folding component and a pre-folding component The post-folding component ($D/I=58.8/55.5^{\circ}$) is normally magnetized and appears to acquire in the Cretaceous Normal Superchron. It is a magnetic signature of the Daebo Orogeny and has been rotated clockwise since this magnetization has been acquired, in common with the main synclinal axis. The pre-folding component ($D/I=1.1/19.4^{\circ}$, Paleopole at $306.1^{\circ}E$, $63.2^{\circ}N$) passes fold and reversal tests and is inferred to be a post-depositional or early chemical diagenetic remanence of Lower-Middle Triassic age. This paleopole corresponds only with the Lower Triassic poles from the North China Block: it is removed from the contemporary poles from the South China Block. If the result of this study is corrected for the clockwise rotation deduced from the Cretaceous overprint, the enhanced agreement with the Lower Triassic poles from the North China block can be achieved. Therefore, a first order correlation between the Korean Peninsula and North China at least since Lower Triassic times is identified in this study.

• Journal of the Korean earth science society
• /
• v.36 no.5
• /
• pp.476-483
• /
• 2015

The high-order Laplacian-type filter, which is capable of providing isotropic and sharp cut-off filtering on the spherical domain, is essential in processing geophysical data. In this study, a spherical high-order filter was designed by combining the Fourier method with finite difference-method in the longitude and latitude, respectively. The regular grid system was employed in the filter, which has uniform angular spacing including the poles. The singularity at poles was eliminated by incorporating variable transforms and continuity-matching boundary conditions across poles. The high-order filter was assessed using the Rossby-Haurwitz wave, the observed geopotential, and observed wind field. The performance of the filter was found comparable to the filter based on the Galerkin procedure. The filter, employing the finite difference method, can be designed to give any target order of accuracy, which is an important advantage being unavailable in other methods. The computational complexity is represented with 2n-1 diagonal matrices solver with n being the target order of accuracy. Along with the availability of arbitrary target-order, it is also advantageous that the filter can adopt the reduced grid to increase computational efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.924-930
• /
• 2003

In this paper, a novel miniaturized microstrip duplexer with attenuation pole is proposed. A three-pole microstrip CT(Cascade Trisection) two bandpass filters have each asymmetrically prescribed transmission zero are design and fabrication. This CT bandpass filter changes coupling structure, which not only shifts the location of attenuation poles but also improves skirt characteristics. The duplexer results of measurement with the cross coupling CT bandpass filters has been yielded better isolation and sharper skirt behavior than that with a conventional bandpass filter. The results of measurement are almost similar to those of simulation results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.513-525
• /
• 1990

This paper presents Adaptive Robust Servocontrol(ARSC) scheme, which is an explicit(or indirect) pole-assignment adaptive algorithm with the property of "robustness". It guarantees asymptotic regulation and tracking in the presence of finite parameter perturbations of the unknown plant(or process) model. The controller structure is obtained by transforming a robust control theory into an adaptive control version. This controller structure is combined with the model estimation algorithm which includes a dead-zone for bounded noise. It is proved theoretically that this combination of control and identification is globally convergent and stable. It is also shown, through a real-time simulation study, that the desired closed-loop poles of the augmented system can be assigned directly, and that the adjustment mechanism of the scheme tunes the controller parameters according to the assigned closed-loop poles.oop poles.