• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.671-683
• /
• 2005

Statement of problem: The most commonly reported problem associated with dental implant restoration is the loosening of the screws. Purpose: This study compared the efficacy of an implant system incorporating an anti-rotational locking sleeve(Anti-Rotating Inner Post Screw System(ARIPS-system)) with other, traditional implant systems as a means of minimizing vibration loosening. Materials and methods: Three implant systems were examined; the conventional external hex type, the ARIPS-system, and the internal taper type implant system 30 specimens(10 samples per group)were fabricated and each abutment screw was secured to the implant future with 32Ncm of torque force and loosening torque was measured using a Torque Gauge. The procedure was repeated 3 times, recording initial loosening torque each time. The re-tightened abutment screw was subjected to a cyclic load having a maximum forte of 200N and minimum of 20N at 2Hz over a period of 12,600 cycles. after which the loosening torque was measured. Measured values were calaulated for statistical analysis. Analysis of measured value was performed by 3 methods: (i) as a percentage average of the initial 3 loosening-torque values(initial loosening value) to the tightening torque of 32Ncm, (ii) as a percentage of the loosening torque value after a load of 200N(experimental value) to the initial loosening value, and (iii) as a percentage of the experimental value to the 32Ncm of tightening torque. The analyses shows the amount of initial loosening at the screw, loosening by repetitive load and the the final loosening value. Results: The results of this study were as follows (1) Percentage of initial loosening value to tightening-torque was increased in order of external hex, ARIPS-system and internal taper and all values between each groups showed statistical significance (p<0.05). (2) Percentage of experimental value to initial loosening value was increased in order of external hex, ARIPS-system and internal taper. Value of internal taper showed significant difference with those of external hex and ARIPS-system (p<0.05). (3) Percentage of experimental value to tightening torque was increased in order of external hex, ARIPS-system and internal taper and all values between each groups showed statistical significance (p<0.05). Conclusion: The results of the analysis of the final loosening level value, which are closely correlated to clinical use, show that the ARIPS-system can be a useful means of minimizing abutment screw loosening when compared to the external hex type system. Although further clinical studies need to be made, the ARIPS-system should be considered to maximize the long-term success of the implant prosthesis.

• Korean Journal of Health Education and Promotion
• /
• v.15 no.2
• /
• pp.217-233
• /
• 1998

This paper analyzed four different perspectives on health care reform in Korea in terms of the basic values, formulated problems and reform plans, implementation methods, and supporting groups. The medical security plan was insisted by social security specialists and social activists focusing on the integration of medical insurance coops in order to enhancing equity and right of the people. However, its perspective was limited to promoting security instead of reforming health care system. The government proposed the health care reform plans in 1994 and in 1997, focusing on promoting efficiency by remedying many problems in health care delivery system. However, its implementation was not successful due to the lack of organizational and financial supporters. Recently, two opposite proposals were issued. The market reform plan paid attention to revitalizing the market function to promoting efficiency by allowing hospitals to treat private patients instead of applying the medical insurance regulation. The government reform plan focused on intensifying governmental planning and intervention in the health care sector in order to removing inefficiency and promoting equity with the supports of social activists and labor unions. Finally, this paper proposed an alternative plan to promote harmonious social relationship between actors in the health care system.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.199-202
• /
• 2013

In order to study the effect of reactive diluents on the electrical insulation breakdown strength and mechanical properties of, a polyglycol and an aliphatic epoxy were individually introduced to an epoxy system. Reactive diluents were used in order to decrease the viscosity of the epoxy system; polyglycol acted as a flexibilizer and 1,4-butanediol diglycidyl ether (BDGE) acted as an aliphatic epoxy, which then acted as a chain extender after curing reaction. The ac electrical breakdown strength was estimated in sphere-to-sphere electrodes and the electrical breakdown strength was estimated by Weibull statistical analysis. The scale parameters of the electrical breakdown strengths for the epoxy resin, epoxy-polyglycol, and epoxy-BDGE were 45.0, 46.2, and 45.1 kV/mm, respectively. The flexural and tensile strengths for epoxy-BDGE were lower than those of the epoxy resin and those for epoxy-polyglycol were lower than those of the epoxy resin.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.3
• /
• pp.289-296
• /
• 2002

New discrete-time modeling and simulation techniques are proposed which take advantages of the special features of PWM converter power stages and their compensation circuits. These techniques provide reduction of system order, and allow for the faster simulation without any numerical convergence problem. A buck converter with two-stage output filter Is employed to confirm the usefulness of the proposed techniques. The simulation results show these techniques can simulate the responoes of PWM converter system up to high frequencies.

• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.127-146
• /
• 1996

Integrating database views is an important step in the conceptual database design process. This paper develops a view integration support system by using a semantic object model. In order to determine the order of the integration, affinities among views and objects are analyzed by employing the vector space theory. Semantic conflicts such as naming and structural conflicts are then resolved. The resolution results are stored in a view repository. Objects and views are integrated and stored in this view repository until all views are considered. A prototype for the system is built and can be used in a client/server environment.

• The Journal of the Korean life insurance medical association
• /
• v.2 no.1
• /
• pp.3-16
• /
• 1985

Necessity of life insurance is stronger for people who feel some anxiety of their health. However, in fact, it is not permitted for them to get a contract, because life insurance stands on the mutual benefit system. Life insurance must be impartial to all applicants. However, it is very reasonable that an applicant, who has high medical impairment like heart infarction or cancer, is rejected, to have a contract by underwriting decision. On the other hand, if his medical impairment is not so severe, we might accept his application by giving some restriction. Numericalratingsystem by hunter-rogers gave us one of solutions to this problem. We can keep impartiality by using more restrictive decision, in order that we demand additional payment to the impairment applicant according to his mortality. We call this system as substandard life insurance. In this system we need detail information about impairments of applicants in order to decide the condition of substandard risks. Therefore, medical examiners are required to have high diagnostic technique.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.2
• /
• pp.124-132
• /
• 2001

Autonomous of welding process in shipyard is ultimately necessary., since welding site is spatially enclosed by floors and girders, and therefore welding operators are exposed to hostile working conditions. To solve this problem, a welding robot that can navigate autonomously within the enclosure needs to be developed. To achieve the welding ra나, the robotic welding systems needs a sensor system for the recognition of the working environments and the weld seam tracking, and a specially designed environment recognition strategy. In this paper, a three-dimensional laser vision system is developed based on the optical triangulation technology in order to provide robots with work environmental map. At the same time a strategy for environment recognition for welding mobile robot is proposed in order to recognize the work environment efficiently. The design of the sensor system, the algorithm for sensing the structured environment, and the recognition strategy and tactics for sensing the work environment are described and dis-cussed in detail.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.2
• /
• pp.1-6
• /
• 1982

This paper reviews and describes some applications of perturbation theory in the practical analysis of linear systems which involve random parameters. Statistical measures of the system outputs are derived in terms of statistical measures of the system parameters and inputs (i.e., in the way of perturbed linear operator equations). Perturbed state transition matrix is also derived. With simple first-order and second-order linear system models, we compare the accuracy of perturbation results with the exact ones. And the convergence of perturbation series is also investigated.

• Journal of applied mathematics & informatics
• /
• v.15 no.1_2
• /
• pp.1-28
• /
• 2004

We first apply a first order splitting to a semilinear reaction-diffusion equation and then discretize the resulting system by an $H^1$-Galerkin mixed finite element method in space. This semidiscrete method yields a system of differential algebraic equations (DAEs) of index one. A priori error estimates for semidiscrete scheme are derived for both differ-ential as well as algebraic components. For fully discretization, an implicit Runge-Kutta (IRK) methods is applied to the temporal direction and the error estimates are discussed for both components. Finally, we conclude the paper with a numerical example.

• Journal of Institute of Control, Robotics and Systems
• /
• v.1 no.2
• /
• pp.71-77
• /
• 1995

The control effectiveness and disturbance suppressibility are mainly governed by a left eigenstructure of a system. In this paper, a control algorithm which uses an output feedback eigenstructure assignment scheme is proposed in order that a desired closed-loop system has the specified degree of controllability and/or degree of disturbance suppressibility. To do this, a modal and a gross disturbance suppressibility measures are proposed. A modified version of Hamdan and Nayfeh's modal controllability measure is also presented. The validity and usefulness of the proposed measures and the controller design algorithm are illustrated by designing a controller for a third-order system as an example.