• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.37-43
• /
• 2005

A haptic steering system which reflects steering reaction torque has been developed for a fixed base vehicle simulator. The haptic steering system consists of a steering effort sensor, MR-clutch, AC servo motor and controller. In order to generate realistic steering torque feel to driver and at the same time to meet real-time simulation requirement, 3D torque map is constructed by experimental data and torque generation algorithm using the torque map has been also developed. 3D torque map is constructed using curve fitting and interpolation of the measured values of the steering angle, velocity and steering torque from actual slalom test on the proving ground. In order to carry out performance test of the developed haptic steering system, a fixed based vehicle simulator is constructed by integrating real time vehicle dynamics module, VR-video/audio module, and the haptic steering system. Steering torque and steering angle curves have been obtained from virtual testing in the vehicle simulator and performance of the haptic steering system has been evaluated.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.604-613
• /
• 2015

An unobstructed off-axis two-mirror system is presented in this paper. First a suitable initial configuration is established based on third-order aberration theory. In order to achieve a wide field of view (FOV) with high image quality , the diffractive mirror is adopted in the two-mirror system to increase the optimization freedom and the aberration relationship between diffractive phase coefficients and Zernike coefficients is derived. Furthermore, a complete comparison design example with a focal length of 1200 mm, F-number of 12, and FOV of 40° × 2° is given to verify the aberration correction ability of the diffractive mirror. The system average wavefront error is 0.007 λ (λ=0.6328 μm) developed from 0.061 λ when the system didn’t adopt the diffractive mirror. In this system the phase modulation function of the diffractive mirror is established as an even function of x, so we could obtain a symmetrical imaging quality about the tangential plane, and the symmetric aberration performance also brings considerable convenience to alignment and testing for the system.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1163-1169
• /
• 2023

In this study, the flow characteristics of the filter system were analyzed due to the effect of the density of the filter in the triple filter system. Flow analysis was performed as a flow passing through a porous medium. The flow characteristics of each filter system were analyzed by arranging filters with different densities in the forward flow flow and the reverse flow. The arrangement order of the triple filters was excellent in the case of forward fluid flow and in the case of higher density from the inside to the outside filter. In the reverse flow filter system, the performance of the system was the best in the case of reverse order filter arrangement. As a result of the analysis, Case II, which showed a pressure drop rate of 5.65% for forward flow, was the best in the reverse direction with a pressure drop rate of 14.25%. Considering reverse and forward flows, it was found that the optimal filter arrangement was most effective when the intermediate filter was the densest, and the inner or outer filter was less dense.

• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.165-177
• /
• 2014

Purpose: This study analyzes the strategical priority to improve eco-labelling certification system, focused on biodegradable resin. Methods: This study will come up with measures to operate the eco-Label certification system related to biodegradable products more effectively and efficiently by discovering various problems related to the system, using causal loop diagram and AHP analysis. Results: This study shows that the government should play more important role while firms could also serve their roles in the initial and stabilizing stages of the eco-labelling certification system, in order to vitalize the eco-Label certification system more effective. Conclusion: This study addresses strategic eco-labelling policies on governmental and firm's operation and providers guidance to practitioners in addressing strategic decision relating to eco-labelling certification system.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.2
• /
• pp.29-38
• /
• 2016

The threats around Korea Peninsula have been dramatically increased because North Korea is developing the Nuclear ballistic missile, Submarine launched ballistic missile(SLBM), and many kinds of weapons for sudden provocations. Therefore, ROK navy needs the cutting-edge warship combat systems in order to defeat the enemy threats effectively in the sea. The paper analyzes current warship combat system acquisition process and studies US navy and other advanced countries acquisition process and their contraction trends. After that, the paper proposes the optimal acquisition process of warship combat system for the ROK navy based on our current situation and other advanced countries acquisition trends. The paper will dedicate the next generation warship combat system acquisition process.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1089-1103
• /
• 2000

A Problem of relevant interest to some industries is that of obtaining optimum two-dimensional layout. To solve this provlem, one is given a number of rectangular sheets and an order for a specified number of each of certain types of two-dimensional regular and irregular shapes. The aim is to cut the the shapes out of the sheets in such a way as to minimize the amount of waste produced. A DCS (Distributed Control System) is an integrated system which applies the decentralization concept to a control system handling both sequential and analog control. A DCS performs many operations such as data gathering, data processing, data storing and monitoring the operatin conditions for the operator. IN this paper, we propose a genetic algorithm based on rotation parameters from which the best pattern of layout is found as well as a layout method for better performance time. A DCS for the plate cutting process system, which is performed by a virtual system, is also identified.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.239-243
• /
• 2003

Recently, there has been active research conducted on the intelligent agent in various fields. The results have been widely applied to intelligent user-friendly interfaces. In this system, we modeled, designed, and implemented an intelligent agent system that can be applied to stock and news. Some procedures such as login sequence to the web site, process to get stock information, setting stock in concern, intelligent news system module, news analysis module, and news learning module are modeled in detail and described in block diagram level. In our experiment on stock system, it showed quite a useful alarming screen avatar result and also on news system. it successfully rearranged the order of the news according to the user's preferences.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.2
• /
• pp.92-98
• /
• 2007

Database System of approved fish drug products was consisted of trade name, species, ingredients, sponsor, disease, dose forms, drug forms, indication, law and so on. Also in addition, we will develope the database system for fish disease information. So we propose to expand and practice for publishing a medical prescription and making an order of drug by Fish Disease Distinction System which is based on drug information system and disease information system.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.200-206
• /
• 2012

In order to develop a deep-underground great train express (GTX) in South Korea, the specifications decision and development of a traction control system (including an inverter and a traction motor), which considers a variety of route conditions, must be advanced. In this study, we examined the running resistance properties of a high-speed traction system based on a variety of tunnel types and vehicle organization methods. Then, we studied the power requirements necessary for the traction motor to maintain balanced speed in the high-speed traction system. From this, we determined the design criteria for the development of a high-speed traction system for use in the deep-underground GTX. Finally, we designed a linear induction motor (LIM) for a propulsion system, and we used the finite element method (FEM) to analyze its performance as it travelled through deep-underground tunnels.

• The Journal of Information Technology
• /
• v.6 no.3
• /
• pp.65-73
• /
• 2003

The evaluation AP embedded Linux board is implemented. The board is made of IBM 405 GP processor, PPCBoot-1.2.1 boot loader, Linux-2.4.21 kernel and root file system. The evaluation board has two flash memories, boot flash and application flash of size 512Kbyte and 16Mbyte, respectively. And it supports IEEE 802.11a which provide the maximum throughput of 54Mbps in the 5.2GHz frequency band. MTD(Memory Technology Device) and JFFS2(Journalling Flash File System version 2) technologies are adopted to optimally package the system software, boot loader, kernel and root file system. And in order to optimize root file system, busybox package and tiny login are used. Linux kernel and root file system is combined together with mkimage utility.