• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.2
• /
• pp.77-85
• /
• 2014

Recently, utilization of MIMO(Multi-Input Multi-Output) system using array antennas is evaluated significantly according to the extension of high-capacity and high-speed communication services. However, MIMO system has disadvantages such as high-complexity and high-power-consumption, because RF(Radio Frequency) chain is required as antenna number, and several array antenna is used in conventional MIMO system. In order to solve these problems, research about beamspace MIMO system using ESPAR(Electronically Steerable Parasitic Array Radiator) antenna that has single RF chain by using one active antenna and several parasitic elements has been studied actively. Beamspace MIMO system using ESPAR antenna is possible to solve the problems of conventional MIMO system, because this system is composed by single RF chain. In this paper, in order to improve the system security, chaos communication algorithm that has characteristics such as non-periodic, non-predictability, easy implementation and initial condition is applied to QPSK (Quadrature Phase Shift Keying) modulated beamspace MIMO system. We design the chaos QPSK modulated beamspace MIMO system, and evaluate SER performance of this system.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.7
• /
• pp.690-695
• /
• 1991

The ability to linearize a nonlinear system by feedback and coordinate change reduces to finding an integrating factor for a one-form which is determined from the system dynamics. Utilizing Taylor series expansion of this one-form, we characterize approximate linearizabilitu. A constructive method is derived for approximate linearization up to order 2.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.163-167
• /
• 2002

We have fabricated planar-type single-layer second-order high-Tc SQUID gradiometers. The devices consisted of symmetrically designed three parallel-connected square pickup loops that were directly coupled to the SQUID. $YBa_2$$Cu_3$$O_{7}$ film was deposited on $SrTiO_3$ substrate by a PLD system and patterned into a device by the photolithography with ion milling technique. Junctions of the SQUID were either step-edge or bicrystal type. All the structures were formed on a 10 mm $\times$ 5 mm substrate. Balancing of the gradiometer was achieved by adjusting the width of the central pickup loop. The gradiometer noise was measured both inside and outside a magnetically shielded room. Details of the results will be discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1917-1923
• /
• 2010

This study focuses on model identification and a 2-DOF PID control algorithm for cooling processes; a pneumatic butterfly-type control valve is used for this purpose. The mathematical model is a transfer function composed of a time delay and a second-order delay system. The control valve is identified as a first-order delay system with a time delay and included in the controlled plant. From the experimental data sets for a demo plant, the model parameters are identified, and the 2-DOF PID control gains are analytically derived by Kitamori's method. We show via a computer simulation and an experimental test that the performance of the proposed 2-DOF PID control system is better than that of a conventional 1-DOF PID control system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2C
• /
• pp.184-190
• /
• 2002

This paper compares and analyzes and analyzes the transmission performance of the OpenCable system and the DBD-C system which are adopted as the digital CATV transmission standard in U.S.A. and Europe respectively through computer simulation under the same channel environment. We considered the channel environment including the random noise and the CTB (Composite Tripple Beats) noise as channel impairments in order to compare the two standard fairly. Additionally, we analyzed the transmission performance of the OpenCable system for the various interleaving depths. We implemented each transmission system by software, and we analyzed BER values with respect to the C/N in order to compare their transmission performance. As a result of the computer simulation, to get the BER of ${10}^{-6}$ the OpenCable system requires 1.2 dB kiwer C/N than the DVB-C system in the 64-QAM mode, and the two system require similar C/N in the 256-QAM mode.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.35-40
• /
• 2017

A most important progress in civilization was the introduction of mass production. One of main methods for mass production is die-casting molds. Due to the high velocity of the liquid metal, aluminum die-casting is so complex where flow momentum is critical matter in the mold filling process. Actually in complex parts, it is almost impossible to calculate the exact mold filling performance with using experimental knowledge. To manufacture the lightweight automobile bodies, aluminum die-castings play a definitive role in the automotive part industry. Due to this condition in the design procedure, the simulation is becoming more important. Simulation can make a casting system optimal and also elevate the casting quality with less experiment. The most advantage of using simulation programs is the time and cost saving of the casting layout design. For a die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimize the casting layout design of an automotive Oil Pan_BR2E, Computer Aided Engineering (CAE) simulation was performed with three layout designs by using the simulation software (AnyCasting). The simulation results were analyzed and compared carefully in order to apply them into the production die-casting mold. During the filling process with three models, internal porosities caused by air entrapments were predicted and also compared with the modification of the gate system and overflows. With the solidification analysis, internal porosities occurring during the solidification process were predicted and also compared with the modified gate system.

• Korean System Dynamics Review
• /
• v.15 no.2
• /
• pp.27-50
• /
• 2014

Korea government established the energy technology development plan (2011-2020) and declared to be a leader of the green energy technologies. The plan aims for 10% market share in the green energy industry, 12% energy efficiency improvement, and 15% greenhouse gas reduction. In order to achieve these goals, the government has tried to calculate the whole scale of national energy R&D investment, annual budget and specific expenditures for new technologies by computer simulation. The simulation modules include the R&D investment model, GDP model, energy consumption and $CO_2$ emission model by System Dynamics. Based on these simulation modules, I tested various scenarios for effectiveness of energy R&D investments until 2020. The results show that Korea should increase national energy R&D investment to 2.3 billion U.S. dollars, and switch the investment from electricity and nuclear power to the renewable energy.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.52-59
• /
• 2021

In this paper, we propose a system that allows small business owners focusing on the restaurant business to easily understand the management situation, and to manage the operation and management centering on the cost of food materials and profits and losses. In general, the metadata structure is different depending on the POS system, so it is necessary to first develop a standardized metadata model for a food material cost management system for small business owners in various industries. For that reason, the system proposed in this paper was applied to the cost management app by referring to the development of a data model using the metadata standard. In addition, in order to implement a cost profit/loss management system for small business owners in the restaurant industry, it was designed to support standardized metadata models from various types of POS systems, and is a hybrid app that can support a smart environment. Interface) was configured.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.76-79
• /
• 2011

In order to improve efficiency and make a new material thin film, we prepared the Al-In-Sn-ZnO thin film on a glass substrate at room temperature using a Facing Target Sputtering (FTS) system. The FTS system was designed to array two targets that face each other. Two different kinds of targets were installed on the FTS system. We used an ITO ($In_2O_3$ 90wt%, $SnO_2$ 10wt%) target and an AZO (ZnO 98wt%, $Al_2O_3$ 2wt%) target. The AIZTO films were deposited using different applied powers to the targets. The as-deposited AIZTO thin films were investigated using a UV/VIS spectrometer, an X-ray diffratometer (XRD), and Energy Dispersive X-ray spectroscopy (EDX).

• Journal of The Korean Astronomical Society
• /
• v.15 no.2
• /
• pp.59-70
• /
• 1982

We have observed 85 UBV standard stars(V<6) with SNU photoelectric photometer system and 24" Cassegrain reflector at Sobaeksan Observing Station during the period between January and May, 1980 in order to examine the photometer system and to determine atmospheric extinction coefficients. From five night observations, the following results were obtained: (1) The set of filters(V=2mm GG 495, B=2mm GG 385+1mm BG 12, U=2mm UG 2) is better than the other filter set used in our tests on the basis of linear instrumental calibrations for V and B filters. (2) The SNU detecting system is very stable within ${\sigma}=0.002$ in magnitude in a night but the variation in its stability from night to night is not negligible. (3) The extinction coefficients were derived from two different methods and we have found no systematic seasonal variation in the extinction coefficients although the mean dispersion is considerable.