• Journal of Surface Science and Engineering
• /
• v.14 no.4
• /
• pp.221-233
• /
• 1981

Section 102(2) (c) of the National Environmental Policy Act of 1969 of the United States requires an environmental assessment of the major federal actions that could significantly a-ffect environmental quality. The review is known as the NEPA assessment process, and the resulting document is called an Environmental Impact Assessment (EIS). Article 5 of the En-vironmental Preservation Law of ROK also introduced this system to a cereain extent. The purpose of this paper is, therefore, to review the general impacts of environmental pollution caused by newly proposed actions on air quality, water resources, and land use as well as specific impacts from the disposal of radiation wastes, operation of petroleum and ru-bber industries, construction of highways and dams, location of power plants and industrial co-mplexes, etc., in order to fully understand the importance of this system. Differences between American and Korean system are also briefly studied and reached to a conclusion that this important system should be understood in such a way as to link and uti-lize all conceivable disciplines and human knowledge in order to protect our environment by all means for ourselves and our coming generations as well.

• Structural Engineering and Mechanics
• /
• v.89 no.2
• /
• pp.199-211
• /
• 2024

The loading capacity of engineering structures/components reduces after the initiation and propagation of crack eventually leads to the final failure. Hence, it becomes essential to deal with the crack and its effects at the design and simulation stages itself, by detecting the prone area of the fracture. The phase-field (PF) method has been accepted widely in simulating fracture problems in complex geometries. However, most of the PF methods are formulated with second order continuity theoryinvolving C⁰ continuity. In the present study, PF method based on fourth-order (i.e., higher order) theory, maintaining C¹ continuity has been proposed for ductile fracture simulation. The formulation includes fourth-order derivative terms of phase field variable, varying between 0 and 1. Applications of fourth-order PF theory to ductile fracture simulation resulted in novelty in this area. The proposed formulation is numerically solved using a two-dimensional finite element (FE) framework in 3-layered manner system. The solutions thus obtained from the proposed fourth order theory for different benchmark problems portray the improvement in the accuracy of the numerical results and are well matched with experimental results available in the literature. These results are also compared with second-order PF theory and a comparison study demonstrated the robustness of the proposed model in capturing ductile behaviour close to experimental observations.

• Journal of the Korean Mathematical Society
• /
• v.32 no.3
• /
• pp.401-413
• /
• 1995

This paper is concerned with the problem given below $$ (1.1) i\frac{dx}{du_1(x,\lambda)} + q1(x)u_2(x,\lambda) = \lambdau_1(x,\lambda) 0 \leq x < \infty - i\frac{dx}{du_2(x,\lambda)} + q2(x)u_1(x,\lambda) = \lambdau_2(x,\lambda), $$ $$ (2) u_2(0,\lambda) - hu_1(0,\lambda) = 0 $$ where $\lambda$ is a complex parameter and h is a non-zero complex number.

• The Journal of Fisheries Business Administration
• /
• v.32 no.2
• /
• pp.73-89
• /
• 2001

The market conditions of sea mustard is changing by overproduction, decreasing price, Import of blanched and salted sea mustard from China into Korea domestic market and increasing market share of sea mustard of China in Japan. In addition, the price support program in sea mustard aquaculture must be modified due to the restriction of domestic support by international organization such as WTO. There are two ways to solve those problems. First is that finding a way to solve the overproduction of sea mustard. One of possible ways is the production adjustment by Marketing Order. Second is that finding an alternative way to replace price support program. The possible way is Direct Payment instead of purchase stockpile system. To introduce marketing Order, outlook center, organization of self-management, production adjustment through output control measure, improvement of market structure, and education/publicity arc necessary. Also, to implement marketing order, setting a model business by government is required. There are two steps for implementation of marketing order. First step is to construct Order Committee including organization of producer, people related marketing. However, this committee must run by government for certain short-term. Second step is to improve quality of product and acceleration of demand. At visual point that enforcement of the first step is completed, government has process that government transfers Order Committees self-correcting. It is desirable that government only conduct the support acts such as quality improvement and acceleration of demand. Also, at early stage it is necessary to have aid system for marketing order For example, we can expect that income increase by production adjustment in long run. However, in short run the income of producer may decrease so, it is required to compensate his economic lose. For compensation, The useful means that can be utilized is direct payment. Direct payment is not continued policy. Also, when production adjustment policy such as Marketing Order has effective results, Direct Payment as an assistant measure must be reduced or abolished. Therefore, when production adjustment acts as an effective tool to control overproduction, Direct Payment system.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.82-90
• /
• 1998

The study was carried out to investigate on the response of environmental sanitation problems in action of the volume based waste charge system in Seoul. The responses from the 396 persons who dwelled in Seoul was stimulatively answered, this system was considered as a successful one 69.6% of total answers, but little portion (21.2%) of those was unknown on the mean of this system. And we knew that this system was need to the communication and education through the press media about this one. After the action of the volume based waste charge system, the volume of refuse discharged in a day was decreased 30-50% than before. In the problems of environmental sanitation after this system, the number of sanitary insect(cockroach etc) and rat was decreased, also the production of order and dust caused by refuse was decreased in comparison with those before. This results were considered that the Separate Collection should be perfectly performed. In response, the regular envelope of refuge was serious problems, the improvement for this one was demanded, The kind of difficult refuse treated was waste foodstuffs> electric products> rubbers> furniture> bottles, cans>papers, pulps etc. and the next proposal for this system should be prepared. Conclusively, the volume based waste charge system should be remarkable system in terms of resources recycling as well as wastes reduction. Above all in order to conform this system the separate collection system should be systematically performed, the next improvable proposal of the detailed methods in this system should be prepared.

• IE interfaces
• /
• v.12 no.2
• /
• pp.329-336
• /
• 1999

Job efficiency and productivity of a manufacturing system with frequent job schedule changes are affected by performance of information system between job order planners anti manufacturing device operators. This paper describes implementation of concurrent information system which can active identify machine status and dispatch job orders to operators in a machine shop. Client and server environment for various machinery is implemented using OSI based network between shop floor control system and manufacturing devices. Portability and scalability are among many characteristics of the implemented system. The developed client and server system is expected to realize high productivity for manufacturing device.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.81-84
• /
• 1999

The paper describes MPEG-2 encoder system developed by ETRI. The encoder system consists of video encoder, audio encoder and program multiplexer. The system can be used as an SDTV encoder as well as a sub-picture encoding module of an HDTV encoder. In order to reduce the hardware size and increase the system reliability, most parts of the MPEG-2 encoding algorithm are implemented with ASIC chips except the rate control part. The developed system is compliant with MPEG-2 and ATSC.

• Journal of Multimedia Information System
• /
• v.4 no.2
• /
• pp.93-98
• /
• 2017

A new cultivation diary system based on environment sensor data and Web 2.0 with Flex is suggested, to improve the previous system using the subjective data of cultivators. The proposed system is designed by applying an object-oriented model called mini-architecture, in order to enhance the reliability of software as well as promote stability to overall system design. The environment sensor data such as temperature and humidity are used to develop the new reliable diary. Also, an active interface based on Web 2.0 and Android as the user GUI are implemented to maximize the convenience while recording the cultivation diary. The result of the performance evaluation shows that the data from sensors has 99.1% of correlation with that of analogue.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.2
• /
• pp.62-68
• /
• 2016

Laser distance measuring systems are used in many fields with high precision. However, when measuring the reflector such as the mirror and the black color, a laser distance measuring system does not guarantee the measurement accuracy. In order to measure the shape of the cargo, this study proposes the radar distance measurement system. The radar distance measuring system is composed of a distance measuring unit with a 24 GHz antenna module, a signal processing and control board and the 1-axis tilting unit. And, this study developed a monitoring program to monitor the measured data. In order to evaluate performance of the developed system, the distance measurement tests are carried out. The distance error was about 6-15 cm. However, considering the size of the cargo, the precision is not a problem. And, cargo shape was measured by using the distance information measured by the 1-axis tilting unit. It could get a 2 dimension shape profile for the cargo stacked in a yard.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.61-62
• /
• 2003

In this paper, the new higher order wall boundary conditions are proposed for solving the incompressible flows. The square driven cavity flows are simulated by using the variable order method of lines with the present wall boundary conditions. The variable order method of lines is constructed by the spatial discretization, i.e., the variable order proper convective scheme for convective terms and the modified differential quadrature method for diffusive terms, and time integration. The 2nd, 4th, and 6th order solutions are presented and these results show this higher order boundary conditions are very promising for the incompressible flow simulations.