• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.111-120
• /
• 2000

Water, waste, electric and gas facilities are urban based facilities that needed in our life and are often located in underground. Therefore, underground facilities are more difficult to manage efficiently than ground facilities. It is needed to carry out survey/probe into underground facilities and to build database in order to prevent city-misfortunes being occurred because of negligent management and in order to minimize budget-waste and a traffic jam according to repetition of road excavation constructions. Also, the development of application system is required to manage efficiently underground facility. Chonju city has launched underground water supply facility computerizing project as a part of National Geographic Information System project until December 1998 and executed survey/probe into 402.89 km water supply that is 80 mm up inside central town area 39.6 $km^2$. Also, chonju city built database into 537 km water supply that is 80 mm below based on water supply card without other survey/probe works. Also, existing work process each department is changed into GIS applied work process and underground water supply facility management system is developed by its work process basis. Water supply underground facility management system that is developed is composed of sub-system like base-map management, water supply inspect, water supply management and water supply inquiry, construction work management, administration management and map management. This research presents the procedure and method of underground water supply facility survey/probe and problem being occurred during survey/probe procedure and also show the functions of each sub-systems composing underground water supply facility management system.

• Journal of the Korean Society of School Health
• /
• v.4 no.2
• /
• pp.90-99
• /
• 1991

At the central level, civil servants concerned with school health were interviewed in order to research the national administrative system of school health. At the level of county, the ledgers concerned at the education office and the schools was reviewed, and the person concerned at them was interviewed, in order to research the present state of local school health management. The policy proposition to improve the administrative system of school health in Korea is as follows. 1) The formal school health activities in districts should be actualized with the funds and the manpower made through realizing local autonomy system. 2) The funds of health center should be able to be used for school health. 3) The important activities of school health that can be actualized without a lot of funds should be chosen and be actualized above all. 4) The formal or informal system among school, health center, and hospital should properly be made. 5) The health engineer of education office or the board of education should be related to health center at school health activities. 6) For the long run, the teacher of health education should teach the subject of health at school. The proposition to improve the management of school health at the level of education office or the board of education is as follows. 1) The formal and informal relation among health center, hospital, and the board of education should be strenthened at the technical and administrative sides. 2) Health center should train the nurse-teachers of school and the health engineers of education office or the board of education. 3) The autonomous health budget of each school should properly be made. 4) The compulsory health budget should properly be made in school education budget. 5) The formal or informal training Course for the nurse-teachers should be practical. The proposition to improve the management of school health at the level of school is as follows. 1) The equipment of nursing room should be used properly, so that the function of nursing room should be revitalized. 2) Nursing room should not be used with other function except nursing function. 3) Oral cavity should be tested when pupils and students undergo physical checkup. 4) The interval of physical checkup at each school should be more than 2 days. And then the pupils and students with abnormal health should be referred to hospital etc.. 5) The misappropriation of the allowance of school doctor should be protected.

• Journal of Ship and Ocean Technology
• /
• v.6 no.4
• /
• pp.1-12
• /
• 2002

A control system for an automated line heating process is developed by use of object-oriented methodology. The main function of the control system is to provide real-time heating information to technicians or automated machines. The information includes heating location, torch speed, heating order, and others. The system development is achieved by following the five steps in the object-oriented procedure. First, requirements are specified and corresponding objects are determined. Then, the analysis, design, and implementation of the proposed system are sequentially carried out. The system consists of six subsystems, or modules. These are (1) the inference module with an artificial neural network algorithm, (2) the analysis module with the Finite Element Method and kinematics analysis, (3) the data access module to store and retrieve the forming information, (4) the communication module, (5) the display module, and (6) the measurement module. The system is useful, irrespective of the heating sources, i.e. flame/gas, laser, or high frequency induction heating. A newly developed automated line heating machine is connected to the proposed system. Experiments and discussions follow.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.75-81
• /
• 2010

The Urban Planning Information System is the core system in urban planning field which should operate at the national level of network, and requires a close inspection from the initial level of development. Therefore, this study analyzes international standards, domestic laws, preceding plans, as well as the standard system established in 2008, in order to identify the problems and propose directions for the future direction of the Urban Planning Information System. Suggestions from this study can be summarized as follows: (1) to take initiatives to create standards for the development of the Urban Planning Information System, followed by the establishment as international standards, (2) to have the system developed as an open structure, and (3) to comply w ith the preceding plans of related national GIS system to enable integration.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.39-43
• /
• 2006

This paper deals with the AR Identification of unknown system using cumulant, which is the 3rd order statistics of output signal in the presence of the noise signal. The algorithms for identification of unknown system we applies to the AR identification method using the cumulant which is possible to the guarantees of global convergence and the representation of amplitude and phase information of system among with the method of parametric modeling. In the process of identification, we considered unknown system to the one of AR system. After the generation of input signal, it was being passed through the system then We use the its output signal that the noise is added. As a result of identification of AR system by changing the signal to noise ratio, we get the fairly good results compared to original system output values and confirmed that the pole was located in the unit circle of z transform.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.1-7
• /
• 2007

Active magnetic bearing has been adopted to support the rotor by electomagnetic force without mechanical contact and lubrication process. A property of the control system for magnetic bearing is improved in accordance with making higher system gain. If the control system has integral part, an excessive overshoot response is shown by making higher integral gain. Therefore, this paper suggests a PID control system in order to eliminate the overshoot at the first stage and improve response characteristics to an impact disturbance at the status of levitation. The control gain was obtained by LQR design method which has the structure of I-PD control system in the state space. The PID control system containing prefilter has the same structure as the I-PD control system. Therefore, the PID control system adopted is able to be tuned by LQR design method. Finally, this paper shows the effect of the prefilter on the active magnetic bearing system through response experiments for levitation responses.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.1
• /
• pp.20-29
• /
• 2013

Medical errors such as adverse drug event, improper transfusion, wrong-site surgery, mistaken patient identity and so on commonly occur at health care practice. Information technology, like Drug Utilization Review(DUR) system which reviews, analyzes, and interprets medication data when prescribing, can play a key role in reducing such medical errors and improving patient safety. Korean Government has guided all hospitals to implement concurrent DUR(cDUR) system, which is the first case worldwide in that all healthcare providers have to use cDUR system when prescribing. This paper introduced a case study that a tertiary hospital has integrated the cDUR system into its comprehensive Hospital Information System(HIS) and analyzed the whole prescription data during a week right after adoption of cDUR system. Considering technical strength and weakness, the cDUR system was integrated into the HIS, using Broker Servers for minimizing doctors' anxiety. As the quantitative analysis of the whole prescription data, DUR conflict events, which mainly included duplicate medications and contra-indicated drug interactions for outpatients, were 2.77%. Although only 0.7% is for the contra-indicated drug interactions, it will be greatly devoted to achieve the purpose of DUR such as improving patient safety.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.57-64
• /
• 2008

This paper describes the development of a small lens molding system for manufacturing the small lens like lens of a cellular phone, a small digital camera and so on. In order to manufacture a small lens, firstly, the raw material for lens with spherical shape should be manufactured by processing a glass material, secondly, the mold inserted the raw material for lens should be heated till its molding temperature in the electric furnace, finally, the small lens is manufactured by applying the force using pressuring control system. In this paper, the small lens molding system with the function of force control and velocity control was developed. It is composed of an electric furnace and its temperature control system, a pressuring control system, a body, and so on. The temperature characteristic test of the electric furnace, the force and velocity characteristic test of the pressuring control system were carried out. It was confirmed that the developed system had good functions for manufacturing a small lens.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1089-1094
• /
• 2004

Diseases in the gastro-intestinal track are on an increasing trend. In order to diagnose a patient, the various signals of the digestive organ, such as temperature, pH, and pressure, can offer the helpful information. Among the above mentioned signals, we choose the pressure variation as a monitoring signal. The variation of a pressure signal of the gastro-intestinal track can offer the information of a digestive trouble or some clues of the diseases. In this paper, a pressure monitoring system for the digestive organs of a living pig is presented. This system concept is to transmit the measured biomedical signals from a transmitter in a living pig to wireless receiver that is positioned out of body. The integrated solution includes the following parts: (1) the swallow type pressure capsule, (2) the receiving set consisting of a receiver, decoder box, and PC. The merit of the proposed system if that the monitoring system can supply the precise and repeatable pressure in the gastro-intestinal track. In addition, the design of low power consumption enables it to keep sending reliable signals while the pressure capsule is working in the digestive organ. The subject of the study for the pressure monitoring system is in-vivo experiments for a living pig. We achieved the pressure tracings in digestive organs and verified the validity of system after several in-vivo tests using pressure monitoring system. As a result, we found each organ has its own characterized pressure fluctuation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.13-27
• /
• 1997

In the modern design technology, a component should be designed to fit into the overall system performance. A design methodology is developed to expedite the mechan- ical design of complex mechanical systems, The relation between the system design and component design is defined by a top-down approach and the results from the system design are utilized in the component design process. As a design example, an automobile exhaust system is selected for the system design and a bellows is chosen for a component design. Design methodology based on the top-down approach consists of five steps; (1) Analysis of service load, (2) Development of a lumped parameter, (3) Completion of the system design, (4) Selection of the component topology, (5) Completion of the component design, A method using a equivalent matrix is developed in order to determine unknown external forces in linear structural analyses. The bellows is also analyzed by the finite element method using a conical frustum shell element. Various experiments are performed to verify the developed theories. The top-down desi- gn approach is demonstrated by a design case using structural and shape optimization technology. Since the method is relatively simple and easy compared to other methods, it can be applied to the general design where system and component designs are involves simultaneously.