• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.2
• /
• pp.125-128
• /
• 2014

The objective of this study is to investigate the changes in levels of odorous compounds in pig slurry during different seasons. Slurry from pens of finishing pigs was sampled every 4-wk and concentration of odorous compounds was analyzed. There was no difference in the range of phenols level (123 to 156 ppm) during spring (April to May), summer (July to August) and fall (October to November). The concentration of indoles was higher (P<0.05) during spring (14.3 ppm) than summer and fall (5.4~7.6 ppm). Level of BCFA ranging from 727 to 1,194 ppm was not different at any season. Among SCFA, there was no difference in propionic acid during any season but levels of acetic acid and butyric acid were highest (P<0.05) during spring season. Concentration of odorous compounds in pig slurry was highest during spring season. Interestingly, it tended to be lower during summer season compare to fall. This result might be due to relatively lower ventilation rate in order to maintain a constant temperature during spring season. Further study will be necessary to determine the relationship between the concentration of odorous compounds and ventilation system.

• Korean Journal of Community Nutrition
• /
• v.13 no.6
• /
• pp.818-828
• /
• 2008

This study was conducted to investigate actual conditions and needs on breastfeeding education for pregnant women in health centers for the development of a breastfeeding educational program. The questionnaires were mailed to 245 health centers and 148 (60.4%) questionnaires were returned. 91% of the health centers had breastfeeding education for pregnant women. 66% of them operated breastfeeding education as one part of other health programs. About 76% of supervisors and 64% of educators were the nurses. The teaching methods frequently used were lectures (30.5%), giving out booklets and leaflets (22.6%), demonstration and practice (21.5%), personal counseling (13.3%), and others. The teaching materials used were materials of outside speakers (39.7%), materials of development oneself (19.0%), materials of academic association or institute (14.8%), and others. The subjects which educators taught were the benefits of breastfeeding (16.7%), breastfeeding techniques (15.8%), caring for breasts before and after delivery (15.1%), nutritional management for lactating women (14.2%), coping strategies for the difficult situation of breastfeeding (13.3%), and others. Those were different from each other according to the educators' general characteristics. Success factors of education were increased motivation for breastfeeding (52.8%), practice (22.6%), professional's lecture (11.3%) and others. The failure factors of education were the ineffectiveness of the lecture method (69.2%), lack of education for supporters (15.4%) and lack of standardized education (15.4%). The most important barrier of education was the lack of a standardized breastfeeding educational programs (43.9%). The most effective teaching methods that educators thought were demonstration and practice (24.0%). The educators thought they need the tools and space for practice (28.2%), a standardized breastfeeding educational program (26.9%), and the human resources (24.4%) for effective education. Subjects that educators thought important for education were the breastfeeding techniques, benefits of breastfeeding, caring for breasts before and after delivery, nutritional management for lactating women, coping strategies for the difficult situation of breastfeeding, rooming system after delivery, ways to assess mother's milk quantity, introducing successful cases of breastfeeding in rank order. To promote the effectiveness of breastfeeding education, standardized breastfeeding educational programs, diverse teaching materials, space and tools, and human resources are needed.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.38-43
• /
• 2010

The purpose of this study is to secure the basis for judgment on the cause of an accident by analyzing the melting characteristics of a blade type fuse used for vehicles due to overload. In order to increase the reliability of the test, it was conducted by connecting the electrical system with conditions similar to those of an actual vehicle to apply the load. Carbonization pattern experiment of fuse by outside flame applied Korean Standard (KS). The fuse melted by the overcurrent showed a smooth cross-section while the test terminals, clear plastic body, etc., burnt out by the external flame was badly deformed. When 185% of the rated current (27.8A) was applied to a cable of 15A rated current onto which an over-capacity fuse (20A) was installed, the fuse melting time was 217 seconds. In addition, when a load current of 28.8[A] (139%) was applied, the fuse's test terminal and terminal blade were not burnt out although foam was observed on some parts of the plastic body. When a load capacity of 28.2[A] (141%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melting time was approximately 10 seconds. When a load current of 35.8[A] (119%) was applied, the fuse's test terminal and terminal blade were not burnt out, although some parts of the plastic body was swelled. However, it was observed that the switch terminal melted if approximately six minutes lapsed under such conditions. When a load capacity of 39.4[A] (131%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melted in approximately 69 seconds, and the test terminal and terminal blade were not burnt.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.179-184
• /
• 2002

Induction of cytochrome P45O (CYP) and 7-etholqresorufin-O-deethylase (EROD) in the microsome exposed to 3-methylcholan-throne (MC), $\beta$-naphthoflavone (BNF) and phenobarbital-Na (PB) was investigated, Microsome was isolated from digestive gland of clam (Coelomactra antiquata) and then exposed to each chemical in concentration range of 0.1 to 1.0 mM for 7 hours. The CYP content and EROD activity in the microsome exposed to each chemical significantly increased compared to the control group. The overall CYP and EROD induction potency was in order of MC>BNF>PB. The induction response of EROD was two times higher than that of CYP level in the microsome exposed to MC, but the induction response of EROD was slightly higher than that of CYP level in BNF and PB exposure groups.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.76-85
• /
• 1993

In order to predict the free surface signature of turbulent ship wakes two things are essential; a basic understanding of the mechanism of turbulent vortical flow/free surface interactions and a mathematical model to accurately predict the signature. The goal of the study described here is both to supplement experimental work to obtain basic understanding, as well as to condense this understanding in a model(or models) that captures the essential phenomena and thus allows predictions. To do so we followed two main paths guided by experimental observations. One is full simulations of the flow using the clavier-Stokes equations. The other is a vortex modeling, where the vortical structures of the flows are approximated by idealized structures, an the interaction assumed to be essentially inviscid. These approaches complement each other. Full simulations are only applicable to small scale phenomena, where the system is simple, and the Reynolds number is low. The vortex modeling, on the other hand, cannot represent essentially viscous aspects of the problem such as the effect of contamination gradient. Obviously, the modeling is what may eventually lead to a prediction method; the full simulations-too limited to mimic all but the simplest circumstances-are to aid and support the construction of realistic models. We address two-dimensional aspects of the vortex/free surface interaction first. Secondly we obtain some basic understanding of the interaction process through an experiment and then talk about several three-dimensional problems hoping to develop a successful prediction model.

• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 2003.10a
• /
• pp.105-126
• /
• 2003

In Korea most of annual rainfall is concentrated in several episodic heavy rains during the season of summer monsoon and typhoon. Because of uneven rainfall distribution many dams have been constructed in order to secure water supply in dry seasons. The Han River system has the most dams among Korean rivers, and the river is a series of dams now. Reservoirs need different strategy of water quality control from river water. Autochthonous organic matter and phosphorus should be the major target to be controlled in lakes. In this Paper some problems are discussed that makes efforts of water quality improvement ineffective in lakes of Korea, even after the substantial investment to wastewater treatment facilities.1) Phosphorus is the key factor controlling eutrophication of lakes and the reduction ofphosphors should be the major target of water treatment. However, water quality management strategy in Korea is still stream-oriented, and focused on BOD removal from sewage. Phosphorus removal efficiency remains as low as 10-30%, because biological treatment is adopted for both secondary treatment and advanced treatment. The standard for TP concentration of the sewage treatment plant effluent is 6 mgP/l in most of regions, and 2 mg/l in enforced region near metropolitan water intake point. TP in the effluents of sewage treatment plants are usually 1-2 mg/1, and most of plants meet the effluent regulation without a further phosphorus removal process. The generous TP standard for effluents discourages further efforts to improve phosphorus removal efficiency of sewage treatment. Considering that TP standard for the effluent is below 0.1 mg/l in some countries, it should be amended to below 0.1 mg/l in Korea, especially in the watershed of large lakes.2) Urban runoff and combined sewer overflow are not treated, even though their total loading into lakes can be comparable to municipal sewage discharges on dry days. Chemical coagulation and rapid settling might be the solution to urban runoff in regard of intermittent operation on only rainy days.3) Aggregated precipitation in Korea that is concentrated on several episodic heavyrains per year causes a large amount of nonpoint source pollution loading into lakes. It makes the treatment of nonpoint source discharge by methods of other countries of even rain pattern, such as retention pond or artificial wetland, impractical in Korea.4) The application rate of fertilizers in Korea is ten times as high as the average ofOECD countries. The total manure discharge from animal farming is thought to be over the capacity of soil treatment in Korea. Even though large portion of manure is composted for organic fertilizer, a lot of nutrients and organic matter emanates from organic compost. The reduction of application rate and discharge rate of phosphorus from agricultural fields should be encouraged by incentives and regulations.5) There is a lot of vegetable fields with high slopes in the upstream region of the HanRiver. Soil erosion is severe due to high slopes, and fertilizer is discharged in the form of adsorbed phosphorus on clay surface. The reduction of soil erosion in the upland area should be the major preventive policy for eutrophication. Uplands of high slope must be recovered to forest, and eroded gullies should be reformed into grass-buffered natural streams which are wider and resistant to bank erosion.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.6
• /
• pp.27-37
• /
• 2008

Applications of 3D data increase with advancement of multimedia technique and contents, and it is necessary to manage and to retrieve for 3D data efficiently. In this paper, we propose a new method using the sliced shape which extracts efficiently a feature description for shape-based retrieval of 3D models. Since the feature descriptor of 3D model should be invariant to translation, rotation and scale for its model, normalization of models requires for 3D model retrieval system. This paper uses principal component analysis(PCA) method in order to normalize all the models. The proposed algorithm finds a direction of each axis by the PCA and creates orthogonal n planes in each axis. These planes are orthogonalized with each axis, and are used to extract sliced shape image. Sliced shape image is the 2D plane created by intersecting at between 3D model and these planes. The proposed feature descriptor is a distribution of Euclidean distances from center point of sliced shape image to its outline. A performed evaluation is used for average of the normalize modified retrieval rank(ANMRR) with a standard evaluation from MPEG-7. In our experimental results, we demonstrate that the proposed method is an efficient 3D model retrieval.

• The Korean Journal of Malacology
• /
• v.26 no.2
• /
• pp.185-188
• /
• 2010

The Web-based the genus Haliotis SNP database was constructed on the basis of Intel Server Platform ZSS130 dual Xeon 3.2 GHz cpu and Linux-based (Cent OS) operating system. Haliotis related sequences (2,830 nucleotide sequences, 9,102 EST sequences) were downloaded through NCBI taxonomy browser. In order to eliminate vector sequences, we conducted vector masking step using cross match software with vector sequence database. In addition, poly-A tails were removed using Trimmest software from EMBOSS package. The processed sequences were clustered and assembled by TGICL package (TIGR tools) equipped with CAP3 software. A web-based interface (Haliotis SNP Database, http://www.haliotis.or.kr) was developed to enable optimal use of the clustered assemblies. The Clustering Res. menu shows the contig sequences from the clustering, the alignment results and sequences from each cluster. And also we can compare any sequences with Haliotis related sequences in BLAST menu. The search menu is equipped with its own search engine so that it is possible to search all of the information in the database using the name of a gene, accession number and/or species name. Taken together, the Web-based SNP database for Haliotis will be valuable to develop SNPs of Haliotis in the future.

• Journal of Korea Water Resources Association
• /
• v.41 no.5
• /
• pp.491-501
• /
• 2008

In order to describe runoff characteristics of urban drainage area, outflow from subbasins divided by considering topography and flow path, is analyzed through stormwater system. In doing so, concentration time and time-area curve change significantly according to basin shape, and runoff characteristics are changed greatly by these attributes. Therefore, in this development study of FFC2Q model by MLTM, we aim to improve the accuracy in analyzing runoff by adding a module that considers basin shape, giving it an advantage over popular urban hydrology models, such as SWMM and ILLUDAS, that can not account for geometric shape of a basin due to their assumptions of unit subbasin as having a simple rectangular form. For subbasin shapes, symmetry types (rectangular, ellipse, lozenge), divergent types (triangle, trapezoid), and convergent types (inverted triangle, inverted trapezoid) have been analyzed in application of time-area curve for surface runoff analysis. As a result, we found that runoff characteristic can be quite different depending on basin shape. For example, when Gunja basin was represented by lozenge shape, the best results for peak flow discharge and overall shape of runoff hydrograph were achieved in comparison to observed data. Additionally, in case of considering subbasin shape, the number of division of drainage basin did not affect peak flow magnitude and gave stable results close to observed data. However, in case of representing the shape of subbasins by traditional rectangular approximation, the division number had sensitive effects on the analysis results.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.281-290
• /
• 2016

Purpose: The increased aesthetic requirements and demands of patients have resulted in the developments of coloring liquid for zirconia. Methods: In this study, zirconia block was dipped into $Fe(NO_3)_3$solution, which showed a color and then concentration of $Fe(NO_3)_3$and zirconia's color and physical properties depending on the dipping time were observed and compared with exclusive coloring solutions. As the result, the following conclusions were obtained. Results: When compared with the specimens that were colored using exclusive solutions, $L^*$ value rose overall depending on the concentration of $Fe(NO_3)_3$and $a^*$ value was red in the form of (+) in all the specimens. Also, $b^*$ value was in the form of (+) at 0.5 to $1{\ss}fl$, but was in the form of (-) at 1.5 to $2{\ss}fl$. The dipping time did not highly influence $L^*$ value, but $a^*$ value and $b^*$ value were directly opposite to the specimens, which were not colored, except the sample that was dipped for only 2 seconds. When compared with exclusive coloring solutions, $Fe(NO_3)_3$had the most similar color at 0.5 to $1{\ss}fl$ and the longer the coloring time, the higher the rate of color change became. In relation to the density change depending on the addition of $Fe(NO_3)_3$, there was the lowest density at $2{\ss}fl$ and the density was increased in the specimens that were not colored. Conclusion: These results show that $Fe(NO_3)_3$solution can be used to make colored zirconia. It is expected that newly made colored zirconia can be used in clinical practice because the colored zirconia not only possesses the mechanical properties that all ceramic core material should have but also was biocompatible to a living cells.