• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.2
• /
• pp.169-180
• /
• 1992

The purpose of this study is to investigate the effects of type of clothing microclimate and exercise condition on ventilation. The experimental system employed a trace gas technique of the previous research. Clothing microclimate volume measurement was based on the substitution water technique for inter-clothing air volume. The experimental variables were tested at four levels of clothing microclimate spacing, microclimate shape of the previous research and two levels of exercise conditions. 2, 4, 6 cm ease were added to B/2+4 of basic blouse pattern for the microclimate spacing variable. Each combination of three variables were tested in triplicate. Analysis of variance of experimental variables on vetilation, such as oxygen exchange rate, half time of first order model was conducted. Oxygen exchange rate and half time of first order model are affected by the shape of microclimate air and exercise condition.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2164-2166
• /
• 2002

This paper present a controller design scheme for time-delay system. The Smith Predictor has been proposed to solve the problem of time-delay. But this structure has a condition that parameters of plant and model have to be matched accurately. Because of this condition, it is not applied broadly in practical industrial process field. In this paper, the 2nd-order model with dead-time is used as plant model of the Smith Predictor and a main controller is designed by using the effect of mismatch between plant and model.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2067-2069
• /
• 2002

The study of the vector control of the induction machine without speed sensor is going on and there are the adaptive performance method to use the flux observer. This study is to make the vector control without the speed sensor based on the flux oriented reference vector control theory. This paper proposes the new speed follow-up method to deduce the current value in the current sensor and the 2 order flux observer based on the observer theory and examine the possibility to realize the flux oriented vector control system using the simulation in this proposed method of this study.

• Journal of Astronomy and Space Sciences
• /
• v.40 no.1
• /
• pp.29-33
• /
• 2023

An unexplained acceleration on the order of 10^-8 cm s^-2, which is close to cH, where c is the speed of light and H is the Hubble constant, is detected in gravitationally bound systems of different scales, from the solar system to clusters of galaxies. We found that any test body located inside a fractal structure with fractal dimension D = 2 experiences acceleration of the same order and confirmed the previous work that photons propagating through this structure decrease the frequency owing to gravitational redshift. The acceleration can be directed against the movement of the test body. The fractal distribution of the matter should be at scales of at least hundreds of megaparsecs to a few gigaparsecs for the existence of this acceleration.

• Journal of the Chungcheong Mathematical Society
• /
• v.22 no.2
• /
• pp.131-139
• /
• 2009

As a generalization of a homomorphism of BCK-algebras, the notion of a semi-homomorphism of BCK-algebras is introduced, and its characterization is given. A condition for a semi-homomorphism to be a homomorphism is provided.

• KSBB Journal
• /
• v.17 no.2
• /
• pp.115-120
• /
• 2002

Biofiltration is a bioprocess treating volatile organic compounds (VOCs) in order to convert the VOCs to harmless products. This review on biofiltration is intended to provide an engineering concept such as removal efficiency, maximum load, elimination capacity and so on. Besides, modeling concept of biofilter is also supplied for designing biofilter system. Quantitative data generated in our research group is shown to explain the engineering concept as well as the modeling idea.

• Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.39-45
• /
• 2000

The stability of vitamin A, $B_1,\;B_2,\;B_6$, C in aqueous multivitamin solutions was carried out by means of estimation of reaction velocity and the results are described in this paper. The stability of vitamin A, $B_1$ and C due to thermal degradation method in aqueous multivitamin solutions was evaluated at 40, 50, 60 and $70^{\circ}C$ up to 40 days. The shelf-lives of vitamin A, B₁ and C in this preparation, calculated using the Arrhenius equation, were 1493, 449 and 639 days at $25^{\circ}C$ respectively. Examination was made on the effect of initial concentration of vitamin $B_2$$(C_0)$ on light fading of vitamin $B_2$ in aqueous multivitamin solutions and it was found that the fading progressed according to the following formula : $-{\frac {dc}{dt}}=K_c\;{\frac C{C_0}}$ where Kc is apparent light-fading rate constant relate to $C_0$. Photodecomposition of vitamin $B_6$ in aqueous multivitamin solutions was apparently first order kinetics and was stable in polyethylene>brown color>glass container to sunlight. Photodecomposition of vitamin $B_6$ in four seasons also investigated.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.463-469
• /
• 2012

Solar thermochemical syngas and hydrogen production process bv redox system of metal oxide was performed under direct irradiation of the metal oxide on the SiC ceramic foam device using solar simulator. $CeO_2/ZrO_2$ nanotube has been synthesized by anodic oxidation method. Syngas and hydrogen production process is one of the promising chemical pathway for storage and transportation of solar heat by converting solar energy to chemical energy. The produced syngas had the $H_2/CO$ ratio of 2, which was suitable for methanol synthesis or Fischer-Tropsch synthesis process. After ten cycles of redox reaction, $CeO_2$ was analyzed using XRD pattern and SEM image in order to characterize the physical and chemical change of metal oxide at the high temperature.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.6
• /
• pp.577-585
• /
• 2014

A series of experiments using atmospheric-pressure non-thermal plasma coupled with transition metal catalysts were performed to remove ethylene from agricultural storage facilities. The non-thermal plasma was created by dielectric barrier discharge, which was in direct contact with the catalyst pellets. The transition metals such as Ag and $V_2O_5$ were supported on ${\gamma}-Al_2O_3$. The effect of catalyst type, specific input energy (SIE) and oxygen content on the removal of ethylene was examined to understand the behavior of the hybrid plasma-catalytic reactor system. With the other parameters kept constant, the plasma-catalytic activity for the removal of ethylene was in order of $V_2O_5/{\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ from high to low. Interestingly, the rate of plasma-catalytic ozone generation was in order of $V_2O_5/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$, implying that the catalyst activation mechanisms by plasma are different for different catalysts. The results obtained by varying the oxygen content indicated that nitrogen-derived reactive species dominated the removal of ethylene under oxygen-lean condition, while ozone and oxygen atoms were mainly involved in the removal under oxygen-rich condition. When the plasma was coupled with $V_2O_5/{\gamma}-Al_2O_3$, nearly complete removal of ethylene was achieved at oxygen contents higher than 5% by volume (inlet ethylene: 250 ppm; gas flow rate: $1.0Lmin^{-1}$; SIE: ${\sim}355JL^{-1}$).

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.6-12
• /
• 2015

The welding technology has been used in almost all industries such as automotive, shipbuilding, power plants and industrial machinery. In this study, the design and implementation of PLC $CO_2$ welding automation system were investigated. For these purposes, the structure analysis for driving supporter was performed and specification of automatic voltage regulator, mutual interface of system and circuit diagram were designed in order to contrive power-saving system. As the results, the stability of design for driving supporter could be convinced by numerical analysis and PLC automatic welding system was suitable for welding automation of structural-manufacturing factory capable of producing various and small amount products. Therefore, it was confirmed that PLC $CO_2$ welding automation system could contribute to productivity, stable quality and power-saving.