• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.4
• /
• pp.190-199
• /
• 1990

The solution for wind drift current in a three-layered open sea region is derived using the Galerkin-Eigenfunction mothod. The presence of discontinuities in the vertical eddy viscosity required a definition of a scalar product which involves the summation of integrals defined over each layer. The expansion of fourth-order B-spline functions is used in determining eigenvalues and corresponding eigenfunctions. In a three-layered system a low value of eddy viscosity is prescribed within the pycnocline to represent the suppression of turburent intensity at the thermocline level. A high concentration of knots within the pycnocline is important in determining eigenfunctions and the associated eigenvalues accurately. Due to the global property of eigenfunctions nonphysical oscillations appear in the current profiles below the surface layer, particularly within the pycnocline.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.5
• /
• pp.391-404
• /
• 2009

A small hydropower plant(SHP) using cooling water discharged from the power plant was constructed in Samcheonpo. This study presents predicted and measured hydrological data in the construction process of small hydropower plant in order to evaluate characteristics of water level variation of cooling water discharge channel which is a key factor in the design of SHP since the water level rise of channel is related to impact on circulating water system of the existing power plant. Various methods were applied for prediction of water level variation in the design stage from simple empirical formula to sophisticated 3-dimensional CFD method. Measured results reveal that mean value was similar between measured and predicted, but measured results were larger than predicted in deviation. Moreover, simple formula, i.e. standard weir equation and Honma equation, were more useful before installation of SHP, but sophisticated methods during operation of SHP.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.371-381
• /
• 1995

The effects of leaf and pod removal on variation of nodal sink components in determinate soybean [Glycine max (L.) Merr.] cultivar 'Danyeobkong' were measured at the experiment field of Chonbuk Provincial Rural Development Administration in 1991. Contrary to the conventional numbering system, node order in this experiment was numbered from top to bottom node. The leaves and pods of main stem from terminal to 5th node, below 6th node, or branches were removed at the growth stage of beginning pod(R3). In the leaf removal treatment, number and weight of pod and seed were highly decreased in upper part leaf removal, especially in removed part. In the pod removal treatment, number and weight of pod and seed were slightly increased in the other part. Cracked seed coat ratios were also high in the leaf removal treatment compared with control but low in the pod removal treatment.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.4
• /
• pp.181-192
• /
• 2008

The purpose of this study was to examine the condition and perception of smoking in dental hygienist of Korean Dental Hygienists Association. The subjects in this study were dental hygienists who attended a symposium on July 5.2007. after a survey was conducted, the answer sheets from 590 participants were analyzed, and the findings of the study were as follows: 1. As for the reality of smoking, 98.3% were nonsmokers, and 1.7% were smokers. 2. perception of smoking was so high(4.76), 'smoking in pregnancy is bad for embryo(4.88)' was highest, 'dullness of taste(4.56)' was lowest. 3. In the smoking-perception of age, under 23 years was highest(4.78) and it was not shown statistically significant correlation. 4. In the smoking-perception of the school career, dental hygienist from 4-grade system was highest(4.87) and it was shown statistically significant correlation. 5. In the smoking-perception of working place, it was shown in order of health center(4.84${\pm}$0.30), dental department of general hospital dental hospital, dental clinic and it was shown statistically significant correlation. 6. In the smoking-perception of living place, Dae-jeon Chung-nam, Je-joo was highest(4.83${\pm}$0.30) and Seoul was lowest(4.65${\pm}$0.43). It was shown statistically significant correlation.

• Journal of Energy Engineering
• /
• v.15 no.2 s.46
• /
• pp.107-117
• /
• 2006

The status of water splitting thermochemical cycle for hydrogen production was reviewed in this article. Mass production of hydrogen could be possible using the thermochemical process which is similar to the concept of conventional chemical reaction system if the high temperature heat source is available. The mediators (chemicals and reagents) should be used to split chemically stable water, and should be recycled in a closed cycle in order to be environmentally acceptable. Though there is no process to reach commercial stage, IS cycle, two-step cycles based on metallic oxide such as ZnO/Zn, $Fe_3O_4/FeO$ and the associated cycles are attracted due to their possibilities of application. Development of materials for high temperature and/or corrosive conditions during thermochemical process is still important topic in some thermochemical processes.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.93-102
• /
• 2014

Recently the interest in permanent magnet alternating motor using for electric compressor become great. Especially the research on Interior Permanent Magnet Motor has been doing actively for its advantages in the energy density and the efficiency. In order to control the output of motor to the desired value, the current control or speed control of motor are required. The accurate detection of rotor position and speed information are necessary for the control of motor. In general, the encoder, hall sensor, and resolver are used to obtain the information of motor position and speed and the speed detection algorithm, M/T method, is applied. However, the M/T method causes the error depending on rotor speed. Therefore, this M/T speed detection method is not perfect. In this paper, it is proposed that the PI control with a 1st transfer function and the integration element between velocity and position are composed in series and this feeds back to the reference value of position angle. The proposed algorithm is a function of the integral elements 2nd term, speed element, is used as an output. Thus, it is possible to detect the correct speed by configuring like the mechanical structure similarly. The proposed algorithm is verified by using PSIM DLL and is applied to the BLAC motor drive. And also it is confirmed that this system estimates the accurate speed regardless of rotor speed changes. As a example, the experimental results and simulations shows that the proposed method is very effective.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2797-2820
• /
• 2015

In order to accommodate huge number of antennas in a limited antenna size, a large scale antenna array is expected to have a three dimensional (3D) array structure. By using the Active Antenna Systems (AAS), the weights of the antenna elements arranged vertically could be configured adaptively. Then, a degree of freedom (DOF) in the vertical plane is provided for system design. So the three-dimension MIMO (3D MIMO) could be realized to solve the actual implementation problem of the massive MIMO. However, in 3D massive MIMO systems, the pilot contamination problem studied in 2D massive MIMO systems and the inter-cell interference as well as inter-vertical sector interference in 3D MIMO systems with vertical sectorization exist simultaneously, when the number of antenna is not large enough. This paper investigates the interference management towards the above challenges in 3D massive MIMO systems. Here, vertical sectorization based on vertical beamforming is included in the concerned systems. Firstly, a cooperative joint vertical beams adjustment and pilot assignment scheme is developed to improve the channel estimation precision of the uplink with pilots being reused across the vertical sectors. Secondly, a downlink interference coordination scheme by jointly controlling weight vectors and power of vertical beams is proposed, where the estimated channel state information is used in the optimization modelling, and the performance loss induced by pilot contamination could be compensated in some degree. Simulation results show that the proposed joint optimization algorithm with controllable vertical beams' weight vectors outperforms the method combining downtilts adjustment and power allocation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1344-1367
• /
• 2014

Mobile traffic is increasing a masse because of the propagation of the Internet and the development of wireless mobile technology. Accordingly, the Network Local Mobility Management (NETLMM) working group [1] of the Internet Engineering Task Force (IETF) has standardized Proxy Mobile IPv6 (PMIPv6) [2] as a protocol for accomplishing the transmissibility of mobile terminals. PMIPv6 is a network-led IP-based mobility management protocol, which can control terminal mobility without depending on the type of access system or the capability of the terminal. By combining PMIPv6 and the mobility of Session Initiation Protocol (SIP), we can establish terminal mobility and session mobility through a more effective route. The mobility function can be improved and the overlap of function reduced as compared to that in the case of independent operation. PMIPv6 is appropriate for a non-real-time service using TCP, and SIP is appropriate for a real-time service using RTP/UDP. Thus, in the case of a terminal using both services, an effective mobility management is possible only by using PMIPv6 together with SIP. In order to manage mobility in this manner, researches on PMIPv6-SIP are in progress. In line with this trend, this paper suggests a new PMIPv6-SIP architecture where when a mobile terminal conducts a handover, a network-led handover while maintaining the session without the addition of a special function or middleware is possible along with effective performance evaluation through mathematical modeling by comparing the delay and the packet loss that occur during the handover to the Pure-SIP.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1148-1161
• /
• 2017

The success of a business process management system stands or falls on the quality of the business processes. Many experiments therefore have been devoting considerable attention to the modeling and analysis of business processes in process-centered organizations. One of those experiments is to apply the probabilistic theories to the analytical evaluations of business process models in order to improve their qualities. In this paper, we excogitate a conceptual way of applying a probability theory of proportions into modeling business processes. There are three types of routing patterns such as sequential, disjunctive, conjunctive and iterative routing patterns in modeling business processes, into which the proportion theory is applicable. This paper focuses on applying the proportion theory to the disjunctive routing patterns, in particular, and formally named proportional information control net that is the formal representation of a corresponding business process model. In this paper, we propose a conceptual approach to discover a proportional information control net from the enactment event histories of the corresponding business process, and describe the details of a series of procedural frameworks and operational mechanisms formally and graphically supporting the proposed approach. We strongly believe that the conceptual approach with the proportional information control net ought to be very useful to improve the quality of business processes by adapting to the reengineering and redesigning the corresponding business processes.

• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.590-594
• /
• 1989

To determine the change of residual chlorpyrifos during Kimchi fermentation, the Kimchi was prepared and fermented at $4^{\circ}C$ for 4 weeks according to the conventional method. As a model experiment, chinese cabbages which were soaked in the chlorpyrifos solution were used for Kimchi preparation. It was found that the concentration of residual chlorpyrifos which was 0.161 ppm in raw cabbages decreased to 0.0938 ppm by 4 times of washing and further decreased to 0.0099ppm during fermentation of Kimchi for 4 weeks. In the model system, the residual chlorpyrifos decreased by the first order reaction as the fermentation of Kimchi proceeded . It's half life is approximately 1.8 weeks.