• KIEE International Transactions on Power Engineering
• /
• v.4A no.2
• /
• pp.73-78
• /
• 2004

This paper proposes a framework for determining the minimum load shedding for restoring solvability. The framework includes a continuation power flow (CPF) and an optimal power flow (OPF). The CPF parameterizes a specified outage from a set of multiple contingencies causing unsolvable cases, and it traces the path of solutions with respect to the parameter variation. At the nose point of the path, sensitivity analysis is performed in order to achieve the most effective control location for load shedding. Using the control location information, the OPF for locating the minimum load shedding is executed in order to restore power flow solvability. It is highlighted that the framework systematically determines control locations and the proper amount of load shedding. In a numerical simulation, an illustrative example of the proposed framework is shown by applying it to the New England 39 bus system.

• Journal of Korea Port Economic Association
• /
• v.19 no.1
• /
• pp.139-159
• /
• 2003

This study deals sith some problems of foreign direct investment and seeks for the ways of activating foreign direct investment (hereafter F.D.I.) by analyzing the Korean economic structure that is faced with the neo-protectivism and nationalism of the advanced or foreign countries currently. During a transformational process in the transitional period of world trade environment, it is necessary for Korea not only to learn the higher technology for advanced countries, but also to apply techonology to their economic structure in order to enter into competition with the advanced countries. Based on the experiences and accomplishments from their investments, Korean enterprises should turn their business into F.D.I. and act appropriately in order to keep the balance between indoor and outdoor investment. Looking through the ways to activate F.D.I., we may make conclusions as follows: 1. Government policy transparency 2. Prudential Macro Economic policy 3. International policy coorperation system 4. Solidification of Foreign Commercial intercourse to Developing countries 5. Globalixation base of domestic coorperation 6. High efficiency- low cost of business coorperation enterprise 7. Attacktive investiestment strategies on conclusive competive advantage 8. Multilateral investment Area 9. New recognixation on marketing investment etc. F.D.I. strategies

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1370-1377
• /
• 2004

Optimal control gain for time-delay systems is made by an optimal control gain for delay-free systems multiplied by a state transition function for the delay time. The optimal control gain for delay-free systems is obtained by pushing two zeros of the PID controller closely to a larger pole of the second order plant. Thus the optimal tuning of PID controller for time-delay second order system is able to be obtained by calculation for the state transition function.

• IE interfaces
• /
• v.19 no.1
• /
• pp.34-42
• /
• 2006

This paper presents a scheme for a hierarchical production scheduling and control system for a refrigerator factory with mixed model assembly lines. The setting of the factory is as follows. There are three mixed-model assembly lines called main line A, B and C and two batch lines that supply parts to the main lines. For each of the main lines, three work-centers are dedicated to them. The sub-lines and work-centers produce parts in batch type. An incoming production order from the master planner is characterized by its product type, amount, and due date. Under this situation, the proposed scheme has several features to schedule and control the above mentioned factory; 1) select the starting time and the place (assembly line) for an order processing, 2) devise a way to control orders to be processed as scheduled, and 3) reschedule orders when something unexpected happen. Finally, this paper provides a case study where the proposed scheme is applied to.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.258-260
• /
• 2004

This paper analyse a operating characteristics when the Community Energy System (CES) is operated islanding mode. In the near future, CES might be one of major energy supply structures. The basic concept of CES is that it supplies electrical and thermal energy to the local customer loads through the islanded power network separated from the grid. The CES must be supplying local load with stable energy on the islanding mode, analysing necessary to thoroughly the operation feature. In order to show them, in this paper, we model the CES with 2.34 MVA DG and simulate the operating feature on the islanding mode of CES. The simulation results show that, in order to stability operate, the CES need the efficient load management and generation control schemes during the transition periods.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1107-1120
• /
• 2004

This study proposes a new scheme for the sampled-data representation of nonlinear systems with time-delayed multi-input. The proposed scheme is based on the Taylor-series expansion and zero-order hold assumption. The mathematical structure of a new discretization scheme is explored. On the basis of this structure, the sampled-data representation of nonlinear systems including time-delay is derived. The new scheme is applied to nonlinear systems with two inputs and then the delayed multi-input general equation is derived. The resulting time-discretization provides a finite-dimensional representation of nonlinear control systems with time-delay enabling existing controller design techniques to be applied to them. In order to evaluate the tracking performance of the proposed scheme, an algorithm is tested for some of the examples including maneuvering of an automobile and a 2-DOF mechanical system.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.2
• /
• pp.149-155
• /
• 2001

The use of primitive cell volume and zero order Laue (ZOLZ) pattern is proposed to identify phase in a complex microstructure. Single convergent beam electron pattern containing higher order Laue zone ring from a nanosized region is sufficient to calculate the primitive cell volume of the phase, while ZOLZ pattern is used to determine the zone axis of the crystal. A computer program is used to screen out possible phases from the value of measured cell volume from convergent beam electron diffraction (CBED) pattern. Indexing of ZOLZ pattern follows in the program to find the zone axis of the identification from a single CBED pattern. An example of the analysis is given from the rapidly solidified $Al-Al_3Ti$ system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.95-105
• /
• 2012

The selective catalytic reduction (SCR) system is a highly-effective aftertreatment device for NOx reduction of diesel engines. Generally, the ammonia ($NH_3$) was generated from reaction mechanism of SCR in the SCR system using the liquid urea as the reluctant. Therefore, the precise urea dosing control is a very important key for NOx and $NH_3$ slip reduction in the SCR system. This paper investigated NOx and $NH_3$ emission characteristics of urea-SCR dosing system based on model-based control algorithm in order to reduce NOx. In the map-based control algorithm, target amount of urea solution was determined by mass flow rate of exhaust gas obtained from engine rpm, torque and $O_2$ for feed-back control NOx concentration should be measured by NOx sensor. Moreover, this algorithm can not estimate $NH_3$ absorbed on the catalyst. Hence, the urea injection can be too rich or too lean. In this study, the model-based control algorithm was developed and evaluated on the numerical model describing physical and chemical phenomena in SCR system. One channel thermo-fluid model coupled with finely tuned chemical reaction model was applied to this control algorithm. The vehicle test was carried out by using map-based and model-based control algorithms in the NEDC mode in order to evaluate the performance of the model based control algorithm.

• Journal of the Korean Institute of Gas
• /
• v.18 no.6
• /
• pp.32-39
• /
• 2014

To ensure the reliability of the safety system so that handing large quantities of hazardous materials in chemical plant is considered basic information in chemical process design. However, the reliability of the production system may be reduced when the reliability of the safety system emphasized in order to ensure the safety of chemical process. It is necessary to balance the reliability of the production system and reliability of the safety. In this study, a quantitative risk assessment was performed by selecting the furnace process, which is widely used in the chemical plant in order to suggest a way to ensure the safety and productivity of chemical process, based on the quantitative data. Quantitative risk assessment methodology have been used directed graph analysis methodology. It is possible to evaluate the reliability of the safety system and the production system. In this study, the optimum system design requirement to improve the safety and the productivity of the furnace is two-out-of-three logic for TT and PT.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.123-131
• /
• 2009

The telecommunication technology in the 21st century has come up to the standard which could transmit various spatial information by means of on-line and the printing technology using computers has been on a par with presswork in quality. In addition, map users also would like to get various spatial information through on-line directly or indirectly. None the less, the supply system of national base map in our country has maintained the off-line sales method. It is owing to this reason that the nation's supply system has shown a high degree of inefficiency from the viewpoint of the inventory control, rapidity, and economical efficiency as compared with the on-line sales system in the developed countries. This study tried to analyze some problems of the present supply system in order to build up the foundation of the efficient map supply system and also developed the system such as On-demand maps, on-line paying and sales, inventory control, meta dat establishment, and security module, etc. This study tried to analyze some problems of the present supply system in order to build up the foundation of the efficient map supply system and also developed the system such as On-demand maps, on-line paying and sales, inventory control, meta dat establishment, and security module, etc.