• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.1
• /
• pp.79-84
• /
• 2003

A light guide panel is an element of the LCD backlight module that is often used for the display of compact electronic devices. In this study, a laser marking system is proposed to fabricate light guide panel, which can replace other manufacturing methods such as silk printing, stamping, or v-cutting methods. The objective of this research is to evaluate the process parameters of the laser marking system. Light guide patterns were marked with a 50W $CO_2$ laser (CW) to understand the effects of average power and scanning speed on the geometry and quality of groove pattern. The width of the fabricated grooves increases with increasing laser power and decreasing scan speed. In order to analyze surface characteristics and optical properties (luminance, uniformity), SEM photography and BM7 (luminance measuring system) were used. As a result, the optimal conditions of the process parameters were determined.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.2
• /
• pp.185-193
• /
• 2020

This paper proposes a 3-screen multi-function console development method using ergonomic design approach. Ergonomically designed console has the advantage of decreasing operator fatigue and increasing concentration by providing better readability, operability and convenience. For this, thirty subjects participated in the experiment for 3-screen multi-function console design. Ergonomic standards of console design were used to establish experiment design and to eliminate incompatible results with ergonomic standards. Subjects evaluated the nine predefined placements of displays and asked to place the display and controllers in order to use comfortably. As a results, total 18 design criteria including displays and controllers placement were determined.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.957_958
• /
• 2009

2DOF is applied to induction moor in order to supply these weak points of PI speed control method in this paper. and proposed method utilize the combination of the voltage model based on stator equivalent model and the current model based on rotor equivalent model, which enables stable estimation of rotor flux. And it also emphasizes the improvement of the control characteristics in low speed region where established schemes have many problems. To prove the propriety of this paper, the various simulations carried out adequacy and stability using Matlab, and at the same time real system is made, so it is proved. As the results of embodying the system, the robust system is realized.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.2
• /
• pp.76-80
• /
• 2013

In this paper, a external electrode fluorescent lamp driving inverter for LCD backlight is designed. AC input from a lamp-driven system to process up to two inverter system for the existing configuration of power-efficient than the system as well as to increase the volume and weight reduction, Furthermore low-cost advantage. AC power input in order to drive EEFL stable and AC 85V ~ 265V power factor increase in the PFC Block can be used for running the Inverter Block EEFL and composed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.117-123
• /
• 1994

This paper describes the effect of air assisted fuel injection system(AAI) using compressed air to improve the performance of lean combustion engine. AAI is designed to promote fuel atomization and intake flow. In order to investigate the performance of engine with AAl, experiments are conducted varying the engine revolution speed, lean air-fuel ratio and intake manifold pressure. Compared with the original engine, the performance of the engine with MI is improved as the air-fuel mixture becomes leaner or the engine load becomes lower. The descreasing rate of BSFC is propotional to the relative air-fuel ratio and the lean misfire limit extended more than 0.2 relative airfuel ratio.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.135-144
• /
• 2010

In this paper, we present the result of preliminary design of tracking mount for ARGO-M which is a movable satellite laser ranging (SLR) system developed by Korea Astronomy and Space Science Institute (KASI). The tracking mount consists of a couple of core parts such as driving motors, encoders and bearings, and the requirements of each parts are determined on the basis of the technical consideration. 2D and 3D models for tracking mount were preliminarily designed using the selected core parts. In order to evaluate the validity of the preliminarily design, the simulator to test the elevation axis was designed and manufactured. The test to check the tracking performance and system accuracy of the simulator was performed, and it was confirmed that the preliminary design meets the operating specifications. Additionally, it was found that the repetitive errors and hysteresis errors need to be improved by the additional control algorithm.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.3
• /
• pp.357-366
• /
• 2006

In order to compute pressure variation for a water distribution system, an expression for the friction factor as a function of Reynolds number and the relative roughness needs to be properly incorporated in computational algorithm. Considering Moody s friction variation, Developed Unsteady Network Analyzer (UNA) has been modified to match computational results with EPANET 2.0. Substantial improvement can be found in the application of Improved UNA to both an hypothetical pipeline network and a real system located in Ulsan City. Random number generator is employed to represent the uncertainty of water use in real pipeline network. Comparisons of application between EPANET 2.0 and improved UNA 2.0 indicate advantages and potentials of this approach.

• Journal of the Korean Ceramic Society
• /
• v.33 no.12
• /
• pp.1331-1338
• /
• 1996

In order to investigate the reaction in the system of fly ash-sulfuric acid-calcium hydroxide the hydrates were produced by the addition of Ca(OH)2 to fly ash activated with sulfuric acid at various temperatures. And then they were characterized by XRD. SEM and TG-DTA. It was found that in the reaction of fly ash with sulfuric acid fly ash was not decomposed but Al2O3 and SiO2 component in it were activated. The addition of calcium hydroxide into this system resulted in the formation of ettringite and calcium silicate hydrate (C-S-H) As the concentration of sulfuric acid and reaction temperature increased the amount of calcium hydroxide decreased fast. At this time gypsum produced by the reaction calcium hydroxide with sulfuric acid was consumed to form ettringite. Accordingly the formation of ettringite increased with calcium hydroxide and reaction time. And it showed faster than the formation of C-S-H.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.84-90
• /
• 2002

In 1995 we licensed pyrolysis gas melting technology of indirect heating type (using kiln) from Siemens AG, and built its demonstration facility in 1998 at Clean-Park-East of Fukuoka City to demonstrate the technology for municipal solid waste (MSW). In 1997 we were awarded an order from Kanemura Co., Ltd. to build a pyrolysis gas melting and power generation plant, specifically for treating residue from car shredder. The latter was launched in 1998, and is currently in commercial operation. The operation of these plants have proven the following facts. (1) The system is capable for performing a stable operation with a wide variety of waste. (2) Pyrolysis is achieved steadily regardless of the variation in the quality of waste. (3) The system can be operated under low excess air ratio (1.2∼1.3). (4) The concentration of dioxins at the furnace outlet is 0.062ng-TEQ/㎥$\_$N/, and 0.002ng-TEQ/㎥$\_$N/, at the stack. (the value is corrected to dryO$_2$ 12％) (5) The purity of recovered metals exceeds 90%.

• Laser Solutions
• /
• v.3 no.2
• /
• pp.53-61
• /
• 2000

On the laser weld production line, a slight alteration of the welding condition produces many defects. The defects are monitored in real time, in order to prevent continuous occurrence of defects, reduce the loss of material, and guarantee good quality. The measurement system is produced by using three photo-diodes for detection of the plasma and spatter signal in CO$_2$ laser welding. For high speed CO$_2$ laser welding, laser tailored welded blanks for example, on-line weld quality monitoring system was developed by using fuzzy multi-feature pattern recognition. Weld qualities were classified optimal heat input, a little low heat input, low heat input, and focus misalignment, and final weld quality were classified good and bad.