• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.14 no.1
• /
• pp.17-27
• /
• 2014

Background: Various medical emergency situations can occur during dental practices. Cardiac arrest is known to comprise approximately 1% of emergency situation. Thus, it is necessary for dentists to be able to perform cardiopulmonary resuscitation (CPR) to increase the chance of saving patient's life in emergency situation. In this paper, we conducted a survey study to evaluate to what extent dentists actually understood CPR practice and if they had experience in handling emergency situations in practice. Method: The survey was done for members of the Korean Dental Society of Anesthesiology (KDSA), who had great interest in CPR and for whom survey-by-mail was convenient. We had selected 472 members of the KDSA with a dental license and whose office address and contact information were appropriate, and sent them a survey questionnaire by mail asking about the degree of their CPR understanding and if they had experience of handling emergency questions before. Statistical analyses -frequency analysis, chi-square test, ANOVA, and so on- were performed by use of IBM SPSS Statistics 19 for each question. Result: Among 472 people, 181 responded (38.4% response rate). Among the respondents were 134 male and 47 female dentists. Their average age was $40.4{\pm}8.4$. In terms of practice type, there were 123 private practitioners (68.0%), 20 professors (11.0%), 16 dentists-in-service (8.8%), 13 residents (specialist training) (7.2%) and 9 military doctors (5%). There were 125 dentists (69.1%) who were specialists or receiving training to be specialist, most of whom were oral surgeon (57, 31.5%) and pediatric dentists (56, 30.9%). There were 153 people (85.0%) who received CPR training before, and 65 of them (35.9%) were receiving regular training. When asked about the ratio of chest pressure vs mouth-to-mouth respiration when conducting CPR, 107 people (59.1%) answered 30:2. However, only 27.1% of them answered correctly for a question regarding CPR stages, C(Circulation)- A(Airway)- B(Breathing)- D(Defibrillation), which was defined in revised 2010 CPR practice guideline. Dentists who had experience of handling emergency situations in their practice were 119 (65.6%). The kinds of emergency situations they experienced were syncope (68, 37.6%), allergic reactions to local anesthetic (44, 24.3%), hyperventilation (43, 23.8%), seizure (25, 13.8%), hypoglycemia (15, 8.3%), breathing difficulty (14, 7.8%), cardiac arrest (11, 6.1%), airway obstruction (6, 3.3%), intake of foreign material and angina pectoris (4, 2.2%), in order of frequency. Most respondents answered that they handled the situation appropriately under the given emergency situation. In terms of emergency equipment they had blood pressure device (70.2%), pulse oximetry (69.6%), Bag-Valve-Mask (56.9%), emergency medicine (41.4%), intubation kit (29.8%), automated external defibrillator (23.2%), suction kit (19.3%) and 12 people (6.6%) did not have any equipment. In terms of confidence in handling emergency situation, with 1-10 point scale, their response was $4.86{\pm}2.41$ points. The average point of those who received regular training was $5.92{\pm}2.20$, while those who did not was $4.29{\pm}2.29$ points (P<0.001) Conclusion: The result showed they had good knowledge of CPR but the information they had was not up-to-date. Also, they were frequently exposed to the risk of emergency situation during their dental practice but the level of confidence in handling the emergency situation was intermediate. Therefore, regular training of CPR to prepare them for handling emergency situation is deemed necessary.

• Journal of Chest Surgery
• /
• v.43 no.4
• /
• pp.375-380
• /
• 2010

Background: Primary cardiac tumors are extremely rare. The most common type are benign myxomas, and these are almost completely curable with early surgery. Malignant tumors, however, such as sarcomas, are difficult to remove surgically, and their prognosis is known to be poor. In this study, data on patients who had undergone surgical treatment of cardiac tumor in the authors' hospital were collected and analyzed. Material and Method: The subjects included 28 patients who had undergone surgical treatment of cardiac tumor from August 1993 to December 2008. Their medical records were reviewed and retrospectively analyzed. Result: The patients were aged from 20 to 76 years (mean age: $54.2{\pm}15.6$), and 11 were male (39%) and 17 female (61%). Fifteen of them (54%) underwent emergency surgery to improve heart failure symptoms. The most common preoperative symptom was dyspnea (15 cases, 54%). Preoperative echocardiography was performed on all the patients. The average size of the tumor as measured during the operation was $7.0{\pm}6.9cm$ (the average length of the long axis was 2∼40 cm), and the sites of tumor attachment were the interatrial septum (18 cases, 64%), the left atrium (9 cases, 32%), the mitral valve annulus (2 cases, 7%), and the left ventricle (2 cases, 7%). The operation was performed with an incision through both atria in all the patients, and a complete excision was made in 25 cases (89%). According to the biopsy results, there were 4 cases of sarcoma (14%), 1 case of lipoma (4%), and 23 cases of myxoma (82%). The three cases in which the tumors were not completely excised were sarcomas. No operative deaths occurred after the operations. Outpatient follow-up was possible for 24 cases (86%), with a mean follow-up period of $46.8{\pm}42.7$ months. Late death occurred in 3 of the 24 patients; each of these patients had sarcomas. Of these patients, the first had undergone two repeat surgeries, the second had metastatic sites removed, and the last had only chemotherapy. The average recurrence time was $12.7{\pm}10.8$ months, and the average metastasis time was $20.5{\pm}16.8$ months. Conclusion: Most cardiac tumors are benign myxomas. In principle, they should be surgically treated because they can create risks such as embolism, and can be radically treated when surgically removed. In most cases, however, malignant sarcomas are already considerably advanced with severe infiltration into the neighboring tissues at the time of diagnosis. The surgical removal of malignant sarcomas is known to be difficult because of the advanced stage and degree of infiltration. We suggest that excision of the removable portion of the tumor sites to alleviate symptoms such as heart failure can improve quality of life.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.9 no.2
• /
• pp.193-199
• /
• 2006

Purpose: The proper diagnosis of Meckel's diverticulum (MD) is difficult and delayed because of the variety of clinical manifestations. We reviewed clinical characteristics of symptomatic MD to facilitate early detection. Methods: We analyzed retrospectively the clinical manifestations, diagnostic tools, histopathological findings, and operative findings in 58 patients with symptomatic MD. Results: The male to female ratio was 2.8 : 1. The most common symptom of MD was bleeding. Others symptoms included: vomiting, abdominal pain, irritability, abdominal distension and fever in the order of frequency. The clinical manifestations of symptomatic MD were lower gastrointestinal bleeding, intestinal obstruction, perforation, diverticulitis and hemoperitoneum, in the order of frequency. The causes of intestinal obstruction were intussusception, internal hernia, band, volvulus, invagination, in the order of frequency. Seventy five percent of patient with MD were diagnosed prior to 5 years of age. The most frequently used diagnostic tool was the Meckel's scan. The diverticulum was located 2 cm to 120 cm proximal to the ileocecal valve. The length of the diverticulum ranged from 1 cm to 10 cm and 94% were less than 5 cm. The most common ectopic tissue found in the MD was gastric mucosa. Ileal resection was more frequently performed than diverticulectomy. Conclusion: In cases of unexplained gastrointestinal bleeding, obstruction and repeated intussusception, the meckel's scan, ultrasound and computed tomography shoud be considered to rule out MD, and if clinically necessary, an exploratory laparotomy when needed.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.685-695
• /
• 2009

Background: Calcification is the most frequent cause of clinical failure of bioprosthetic tissues that are fabricated from Glutaraldehyde (GA)-fixed porcine valve or bovine pericardium. We recently used a multi-factorial approach of employing different mechanisms to investigate how to reduce the calcification of bioprosthetic tissues. The purpose of the present study was to evaluate the synchronized synergism using ethanol, L-lysine and $NaBH_4$ in glutaraldehyde treated porcine pericardium from the standpoint of calcification and tissue elasticity. Material and Method: Porcine pericardium was fixed with 0.625% GA (commercial fixation). An interim step of ethanol (80%; 1 day at room temperature) or L-lysine (0.1 M; 2 days at $37^{\circ}C$) or $NaBH_4$ (0.1 M; 2 days at room temperature) was followed by completion of the GA fixation (2 days at $4^{\circ}C$ and 7 days at room temperature). The tensile strength and thickness of the samples were measured. The treated pericardiums were implanted subcutaneously into three-week old Sprague-Dawley rats for 8 weeks. The calcium content was assessed by atomic absorption spectroscopy and the histology of the samples. Result: The amount of calcium in the pericardium pretreated with ethanol (13.6${\pm}$10.0 ug/mg, p=0.008), L-lysine (15.3${\pm}$1.0 ug/mg, p=0.002) and both (16.1${\pm}$11.1 ug/mg, p=0.012) was significantly reduced compared with the control (51.2${\pm}$8.5 ug/mg). However, $NaBH_4$ pretreatment (65.7${\pm}$61.8 ug/mg, p=0.653) and combined pretreatment that including ethanol, L-lysine and $NaBH_4$ (92.9${\pm}$58.3 ug/mg, p=0.288) were not significantly different from the controls(51.2${\pm}$8.5 ug/mg). Both the combined pretreatment using ethanol and L-lysine (7.60${\pm}$1.55, p=0.76) and the combined pretreatment that included ethanol, L-lysine and $NaBH_4$ (7.47${\pm}$1.85, p=0.33) increased the tensile strength/thickness ratio compared with that of the controls (4.75${\pm}$1.88). Conclusion: The combined pretreatment using ethanol and L-lysine seemed to decrease the calcification of porcine pericardium fixed with glutaraldehyde, as compared to single pretreatment, and it increase the tissue elasticity, but to the degree that showed synchronized synergism. $NaBH_4$ pretreatment seemed to increase the calcification of porcine pericardium, irrespective of whether single or combined pretreatment was used.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.232-237
• /
• 2008

A method to generate electric power from small scale water tank. For this purpose, manufacturing tank is investigated, measuring water level change at any time, and finally comparing experimental and theoretical value, are performed. Inner and outer tank are made to simulate flood and ebb generation. Two sets of pipe are connected between tanks, and experiments are performed under varying flowrate. Coefficients of flowrate are calculated comparing water level change data and theoretical value. Measured and theoretical water levels are highly correlated, and this ascertains that analytical equation simulates real water level changes well. Flowrate change depending on the existence of propeller and valve, on flood and ebb generation, shows the necessity of experiments in the process of manufacturing electric power system. Moreover, total energy calculated from experimental data agrees well with that of theoretical equation. In spite of small tidal power output, this generating system with optimum water tank can be applied to any place where high water level change occurs, and can make a contribution to producing new and renewable energy consequently.

• Journal of Acupuncture Research
• /
• v.26 no.6
• /
• pp.101-110
• /
• 2009

Objectives : We developed and proposed a guideline for safety and performance assessment of electric cupping apparatus(Class 2 medical device). Methods : We drafted the guideline for safety and performance assessment of electric cupping apparatus by referring the existing standards and guideline, based on online questionnaire for Korean medical doctors and measurement data from commercially available products. Physical dimension of cups and inner vacuum pressure were acquired for the measurement in order to achieve the purposes. Results : This guideline only can be applied to electric cupping apparatus for enhancing blood circulation by employing negative pressure generated by electricity. Seven items of appearance and label, operation test of pump, variation test of input electricity, vacuum level test, vacuum sustain test, cup-size dependent test, noise level test are suggested for evaluation subjects and methods required for electric cupping devices. Requirements for the design and development of electric cupping devices are suggested: vacuum level indicator, vacuum generation rate, pressure control, valve detachment stability, cup comparability, safety measure, surge protection, user friendliness, instruction for use (IFU). Conclusions : We proposed a guideline for safety and performance assessment of electric cupping apparatus to improve the quality of relating products and aid the commercialization of them, by aiming higher industrial competitiveness of the medical device sectors in Korea. Discussion with related institutes such as industry, academy and government is further required. Public hearings also need to be held prior to the establishment of a final guideline and standard.

• The Journal of Korean Physical Therapy
• /
• v.10 no.1
• /
• pp.81-98
• /
• 1998

Isokinetic evaluation of trunk flexors and trunk extensors was performed at $60^{\circ}/sec\;and\;120^{\circ}/sec$ of angular velocity by using cybex 6000TEF Unit on 31 healthy male white workers and 15 post-operative HILD patients with no significant difference in mean age and mean body weight between two groups, and compared each other. The purpose of this study is to obtain the isokinetic normative strength values and endurance latins for Dunk extensors and trunk flexors, and is to provide a guideline for rehabilitation program of post-operative HILD patients. The collected data were analyzed by ANOVA, Duncan's Nyktuoke Range Test, and Pearson correlation coefficiency in PC-SAS program, The results obtained were as follow ; 1. Post-operative subjects has lower isokinetic values than normal subjects in peak torque, peak torque $\%$ by body weight, total work, total work $\%$ by body weight, average power, average power $\%$ by body weight, TAAE of trunk flexors and trunk extensors, and there are significant differences with statistic value in trunk extensors at $60^{\circ}/sec$ and in trunk flexors and trunk extensors at $120^{\circ}/sec$ between two groups(p<0.05). 2. Pest-ooperative subjects has lower values for angle of peak torque than normal subjects in trunk extensors, and there are significant differences with statistic value at $60^{\circ}/sec$ and $120^{\circ}/sec$ between two groups. 3. Post-operative subjects has higher values for endurance ratios than normal subjects in trunk extensors and flexors, but there are no significant differences with statistic value between two groups. 4. Post-operative subjects has higher values than normal subjects in peak torque ratios, total work ratios, average power ratios of trunk flexors to trunk extensors, and there are significant differences with statistic value between two groups(p<0.01). 5. There is significant positive-correlation with statistic valve between peak torque and height and body weight in normal subjects(p<0.05), but Thjere is significant negative-correlation between peak torque of trunk extensor at $120^{\circ}/sec$ and age (p<0.05). 6. There is significant positive-correlation with statistic value between peak torque of trunk flexors and body weight in post-operative subjects (p<0.05), but There is significant negative-correlation between peak torque of trunk extensor add age (p<0.05). In conclusion, post-operative subjects have greater weakness in trunk musculature than normal subjects, especially there is more significant weakness in trunk extensors than in trunk flexors

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.343-350
• /
• 2012

A planar solid oxide fuel cell (PSOFC) is studied in its application in a high-temperature stationary power plant. Even though PSOFCs with external reformers are designed for application from the distributed power source to the central power plant, such PSOFCs may sacrifice more system efficiency than internally reformed SOFCs. In this study, modeling of the PSOFC with an external reformer was developed to analyze the feasibility of thermal energy utilization for the external reformer. The PSOFC system model includes the stack, reformer, burner, heat exchanger, blower, pump, PID controller, 3-way valve, reactor, mixer, and steam separator. The model was developed under the Matlab/Simulink environment with Thermolib$^{(R)}$ modules. The model was used to study the system performance according to its configuration. Three configurations of the SOFC system were selected for the comparison of the system performance. The system configuration considered the cathode recirculation, thermal sources for the external reformer, heat-up of operating gases, and condensate anode off-gas for the enhancement of the fuel concentration. The simulation results show that the magnitude of the electric efficiency of the PSOFC system for Case 2 is 12.13% higher than that for Case 1 (reference case), and the thermal efficiency of the PSOFC system for Case 3 is 76.12%, which is the highest of all the cases investigated.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.122-128
• /
• 2010

Purpose: Many descriptions of the digital arterial anatomy including skin territory of the finger have been published. Relatively few studies on venous architecture of the finger have been performed in this area, in part, attributable to the technical difficulties encountered in dissecting small vessels. The purpose of this study is to present the precise microsurgical anatomy of the vein related to the digital artery and venae comitantes of the components. Methods: Arterial and venous anatomy of their relation to the fingers were examined in 38 specimens of two fresh cadavers and 36 clinical cases. All specimens were evaluated grossly, surgical microscopically, or / and light microscopically to observe the three & two-dimensional structure of the artery and joining vein, evidence of the venae comitantes, and venous valve. Results: No longitudinal venae comitantes along the digital artery were found in any specimens. The size of the venae comitantes of each digital artery was much smaller than other vein, but always existed any level of digital artery. One or two venae comitantes in the digital artery ran spiral, oblique, helical, fibrillar, or irregular branched shape. The authors also found the vein of the finger, that had bicuspid valves, but not in venae comitantes. Conclusion: Recently, venous outflow problem rather than arterial circulation is the most common cause tissue failure after microvascular surgery in the hand. Sometimes, if it is not recognized early, there is an increased risk of tissue damage and loss. The authors concluded that this study presents a useful knowledge for the characterization of the venous structure and evidence for venae comitantes like a venule in the digital artery at varying levels of the finger.