Abstract
A method to generate electric power from small scale water tank. For this purpose, manufacturing tank is investigated, measuring water level change at any time, and finally comparing experimental and theoretical value, are performed. Inner and outer tank are made to simulate flood and ebb generation. Two sets of pipe are connected between tanks, and experiments are performed under varying flowrate. Coefficients of flowrate are calculated comparing water level change data and theoretical value. Measured and theoretical water levels are highly correlated, and this ascertains that analytical equation simulates real water level changes well. Flowrate change depending on the existence of propeller and valve, on flood and ebb generation, shows the necessity of experiments in the process of manufacturing electric power system. Moreover, total energy calculated from experimental data agrees well with that of theoretical equation. In spite of small tidal power output, this generating system with optimum water tank can be applied to any place where high water level change occurs, and can make a contribution to producing new and renewable energy consequently.
소규모 수조를 이용한 조력발전시스템에 대하여 검토하였다. 이를 위하여 소규모 수조를 제작하고 시간에 따른 수위의 변화를 관측한 후 이를 이론적인 계산값과 비교하였다. 수조는 내부수조와 외부수조로 제작하여 창조발전과 낙조발전의 개념을 재현할 수 있도록 하였다. 또한 내부수조와 외부수조의 연결관을 두 곳에 설치하여 유량을 변화시키며 실험을 하였다. 관측된 수위의 변화를 계산값과 비교하여 유량계수를 산출하였다. 수위의 관측치와 이론적인 계산치는 높은 상관관계를 갖는 것으로 나타나 이론식이 실제의 수위를 잘 모의하는 것으로 나타났다. 프로펠러의 유무, 밸브의 유무, 창조 발전, 낙조 발전 등에 따라 유량계수가 큰 변화를 보이는 것으로 나타나 실제 발전시스템을 제작할 때 실험을 통한 유량계수 등의 산정이 반드시 필요한 것으로 나타났다. 또한 이론적인 식에 의한 총에너지와 실험유량으로부터 계산된 총에너지를 비교한 결과 큰 차이가 없는 것으로 나타났다. 본 수조에 대하여 계산된 발전량은 크지 않으나 충분한 조차가 있는 곳에 적정 규모의 수조를 설치할 경우 소규모의 조력발전이 가능하여 신재생에너지 생산에 기여할 것으로 판단된다.