• 한국기후변화학회지
• /
• 제8권3호
• /
• pp.231-237
• /
• 2017

In this study, the $N_2O$ emission factor of the facility was developed by measuring the kiln type pyrolysis melting facility. This used PAS (Photoacoustic Spectroscopy) method and measured the $N_2O$ emission concentration. From March 2016 to April 2016, it was measured over a total of two times and $N_2O$ concentrations were measured continuously for 24 hours using a 24 hour continuous measuring instrument (LSE-4405). The measured $N_2O$ emission concentration of the pyrolysis melting facility was 0.263 ppm on average and the emission concentration distribution in the range of 0.013~0.733 ppm was obtained. Therefore, the $N_2O$ emission factor of the kiln-type pyrolysis melting facility was estimated to be $0.829gN_2O/ton$-Waste. As a result of comparing the $N_2O$ emission factor of the thermal kiln type pyrolysis melting facility and the previous study, previous studies were about 18 times higher. It is estimated that this is due to the difference of furnace temperature, oxygen concentration and denitrification facilities. It is considered that the study of the emission factor of pyrolysis melting facility is an important factor in improving the credibility of greenhouse gas inventory in waste incineration sector.

• 한국문헌정보학회지
• /
• 제46권2호
• /
• pp.245-260
• /
• 2012

본 연구의 목적은 Kor-Factor2의 평가요소인 연평균 논문 수 대신 '총 논문 수의 십분위수'를 적용하여 지수 값과 질적 양적 평가요소 사이의 연관성의 변화를 분석하고, 다른 평가지표와 비교하여 등재학술지와 등재후보학술지를 구별해내는 정도를 평가하는 것이다. 지수 값과 질적 양적 평가요소 사이의 연관성의 분석은 지수 값과 평가요소 사이의 상관계수를 구하여 Kor-Factor2의 경우와 비교하는 방식으로 이루어졌다. 학술지 등재 상태의 구별 능력에 대한 평가는 Kor-Factor2, IF 및 학술지 h-지수를 비교 대상으로 하여 각 지수 값을 구하고, 등재후보학술지 집단과 등재학술지 집단으로 나누어 두 집단의 지수 값 평균 차이에 대한 독립표본 t-검정을 실시하였다. 연구 결과 본 논문에서 총 논문 수의 십분위수를 적용하여 제안한 지표가 Kor-Factor2와 비교하여 지수 값과 질적 평가요소 사이의 연관성이 양적 평가요소와의 연관성에 비해 높은 것으로 나타났으며, 학술지의 등재 상태에 따른 차이 구별 능력에 있어서도 Kor-Factor2, IF, 학술지 h-지수에 비해 우수한 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.269-272
• /
• 1999

In this study, electrical properties and TCFr of Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$-Pb(Mn $_{1}$3/Nb$_{2}$3/)O$_3$-Pb(zr, Ti)O$_3$ composition ceramics were investigated wish the Zr/Ti ratio and the additions of Y2O3. and Fe$_2$O$_3$ Electromechanical coupling factor(Kp) showed the highest value of 0.555 in the Zr/Ti=0.50/0.50 ratio ,however, dielectric constant showed the highest value of 1,217 in the Zr/Ti = 0.49/0.51 ratio. Excellent TCFr vague of 421ppm/$^{\circ}C$] at-30~9O$^{\circ}C$ was appeared in the Zr/Ti=0.50/0.50 ratio and electro-mechanical coupling factor(Kp) , mechanical quility factor(Qm) and dielectric constant was 0.496, 1,286 and 1,085 ,respectively ,in the composition ceramics of lwt%Y$_2$O$_3$ and 0.3wt%Fe$_2$O$_3$.

• 한국동물학회지
• /
• 제38권1호
• /
• pp.20-25
• /
• 1995

계배 limb bud 간충직 연골원성 세포로부터 연골세포로의 분화에 미치는 transforming growth factor-f2(TGF-$\beta$2)의 영향을 알아보기 위하여, Hamburger-Hamilton stages 23/24의 간충직 세포들을 미세배양법으로 배양하면서. TGF-$\beta$2의 농도 및 처리시간에 따른 연골세포의 분화에 미치는 영향을 조사하였다 그 결과 TGF-$\beta$2는 배양 첫 24시간 동안 1-2 ng/ml의 농도로 처리하였을 때 가장 효과적으로 연골세포의 분화를 촉진하였으며, 또한 TGF-$\beta$2의 처리군에서 배양 3일째에 tsss) sulfate의 glycosaminoglvcan으로의 유입량이 현저히 증가함을 보였다 한편. 배양 48시간내에TGF-$\beta$2를 처리한 경우 분화를 촉진 유도한 반면, 배양 48시간 이후에 처리하였을 때에는 분화 촉진 효과가 나타나지 않았다. 이상의 결과로부터 TGF-$\beta$2는 연골원 세포의 분화 초기단계에 세포외기질의 합성을 촉진시켜 세포응축을 유발하고. 세포-세포 및 세포-세포외기질의 상호작용을 증대시킴으로써 연골세포로의 분화를 촉진시킬 것으로 추정되었다.

• 한국조리학회지
• /
• 제7권3호
• /
• pp.211-239
• /
• 2001

A study is on the coupon which is one of the sales promotion methods for family restaurant. The factor of family restaurant coupon use in the study was analyzed based on theoretical study. In addition, difference of food service manners by behavior and demographic factor, and so by means of this factor was analyzed and was done t-Test and anova. As a result of this study, eight factors were found. This eight factors were named by researcher. Eight factors are as follows There are 1. factor taste, 2. factor choice, 3. factor expectation, 4. factor satisfaction, 5. factor durability, 6. factor convenience, 7. factor safety, 8. factor preference. These factors influence family restaurant coupon used by customer. And so we know that between demographic factor and food service manners are different. In the conclusion, the factor of family restaurant coupon use, by valuable sides and typical sides was presented as the sales promotion methods for coupon. First, valuable side endows coupon with value and so lead persistent purchase. Second, typical side cause interest and so leads repurchase. But in the future, continuous study should be go on for satisfaction of customer and effective marketing strategy of family restaurant.

• 한국방사선학회논문지
• /
• 제16권2호
• /
• pp.115-122
• /
• 2022

본 연구는 후각망울(Olfactory Bulb) 검사 시 SPACE 3D T2 기법의 Turbo Factor 값을 변화하여 검사 한 후 2D TSE T2와 비교하여 진단능과 화질의 변화를 알아보고자 한다. 연구 결과 정성적, 정량적 분석 결과 SPACE 3D T2 기법이 2D TSE T2 기법과 비교 시 통계적으로 유의한 차이가 있음을 알 수 있었으며, 결론적으로 Turbo Factor값을 적절하게 변화 시킨 SPACE 3D T2 기법은 검사시간을 단축시키면서 2D TSE T2기법과 비교하여 화질이 증가 된 영상을 획득할 수 있으므로 임상적으로 충분한 진단적 가치가 있다고 사료된다.

• 한국의류학회지
• /
• 제21권1호
• /
• pp.144-154
• /
• 1997

For design of early childhood children's footwear, this study was to analyze the foot type by factor analysis and cluster analysis. This study was performed 200 male and 200 female early childhood children from 3 to 6 years, reported in part 1. The result was as follows : 1. There are no significant differences concerning significances, factor loading, eigenvalues, and contribution rates of factor among the results abtained by analyzing the male, female and both sexes data. 2. The 1st factor signifies the size factor that represents total foot mass. The average scores of the 1st factor significantly increase with age in both sexes, and those scores of male are significantly higher than those of female. 3. The End factor signifies the height of Tarsal, Heel and Arch. The average scores of the 2nd factor significantly increase with age in both sexes, and there are no significant differences between the average scores of male and female's except the age 3. 4. The 3rd factor signifies the shape of Metatarso-phalanx angle. The average scores of the 3rd factor significantly decrease with age in female. 5. There are four clusters selected by fastcluster in every age group. The characteristics of four clusters of every age group are different significantly.

• 한국의류학회지
• /
• 제27권7호
• /
• pp.831-842
• /
• 2003

The purpose of this study is to analyze body types of Chinese women and provide concrete information on it by classifying them into several representative groups. As for the method of this study, statistical analysis is made of 79 items. This is done from July 18 to Aug 07, 2002, 525 female subjects from age 20 to 49 participated in this study. They all live in Beijing and Shanghai in China. The results of this study are as follows. 1. Means, standard deviations, the maximum and minimum of 19 items are extracted. The height and girth item have a high standard deviations. 2. 8 factors are extracted by using factor analysis. Factor 1: body obesity, Factor 2: vertical body size, Factor 3: upper body length Factor 4: size of ankles, Factor 5: angle of shoulders, Factor 6: length of hip Factor 7: size of shoulder, Factor 8: shape of chest 3. The body types of Chinese women are classified into 5 sub groups from the result of the Cluster analysis.

• 한국생활과학회지
• /
• 제17권6호
• /
• pp.1167-1180
• /
• 2008

The purpose of this study was to take the gauge of the importance-performance of the clothing store attribute in the department store. The survey was administered to customers of department stores in Deajeon city and frequency analysis, factor analysis, reliability analysis, and importance-performance analysis were used to analyze the data of 37 clothing store attributes. The findings of this study were as bellows: 1. 8 factors were distracted from 37 clothing store attributes by factor analysis (Factor 1: goods, Factor 2; store's facility and environment, Factor 3; salesman and service, Factor 4; brand, Factor 5; price, Factor 6; store's atmosphere, Factor 7; convenience of the transportation and access, Factor 8; promotion and advertisement) 2. as results of importance-performance analysis, 10 attributes were shown in area I (high importance and high performance) which needed a strategy of Keep Up the Good Work, 6 attributes in area II (low importance but high performance) fitted a strategy of Possible Overkill, 12 attributes in area III (high importance but low performance) corresponded to a strategy of Concentrate Here, and finally a strategy of Low Priority was needed to 9 attributes in area IV (low importance and low performance).

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2792-2799
• /
• 1996

It was shown in the previous study that the numerically derived elastic work factor for CLS specimen was independent of fiber direction for a unidirectional case. Also, it was proposed the elastic work factor could be used to determine energy release rate from a single test record. In the present study, elastic work factor was derived from a simple beam theory to investigate its dependence on material property and geometric condition. Also, the elastic work factor of CLS specimen was applied experimentally to determine critical energy release rate in order to prove its validity determining critical energy release rate from a single specimen. For this purpose, critical energy release rate determined using the elastic work factor was compared with that determined by the compliance method. The results showed that while elastic work factor is affected by $t_2/t_1$ and $L_2/L_1$ it is independent of fiber angle for a unidirectional case. It was also found that critical energy release rates determined by both methods are comparable each other, thus elastic work factor approach can be used to determine energy release rate from a single test specimen.