• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.577-579
• /
• 2005

본 논문에서는 손 제스처를 사용한 2족 보행로봇 제어방법을 제안한다. 제안된 방법은 연속된 입력 영상으로부터 사용자의 손을 검출하기 위해, 피부색 정보와 Hue의 불변 모멘트 정보를 사용한다. 검출된 손 영역은 Active Contour Model를 사용하여 추적한다. 손 제스처를 인식하기 위해 Hue의 불변 모멘 정보로부터, 검출된 손의 모양을판단하고 그 결과를 미리 정해둔 심벌 중에 하나로 할당한다. 이렇게 연속적으로 할당된 심벌들은 HMM(Hidden Markov Model) 인식기를 통해 인식 되고 로봇 명령어를 출력하며, 출력된 명령어에 따라 로봇이 제어된다. 제안된 방법의 효율성을 증명하기 위해, 자체 제작한 2족 보행로봇(KAI)으로 6개의 손 제스처를 이용하여 사용자가 원격지에 있는 로봇의 보행을 제어하는 원격 로봇 보행 제어 시스템에 응용해 보았다. 실험 결과, $94\%$의 인식률을 보였다.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.52-59
• /
• 2006

Walking robot is able to move in regular or irregular terrain. It can walk that change adaptive algorithms according to the terrain. Existing papers about adaptive gaits of blind robot are based on intelligent foothold selection. However, this paper proposes a algerian that is based on the variations of stroke and period to adapt the irregular terrain. If thus adaptive algorithms is used, robot can maintain periodic gait walking and constant speed using only force sensor even in the irregular terrain without external sophisticated sensor. In this paper Quadruped robot with 2 DOF in each leg, is walk experiment with the wave gait in regular and irregular terrain. So the adaptive algorithm is proved useful through walk experiment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.522-525
• /
• 2007

Most big difference of existing robot and biped robot stays at the leg. The wheel is very efficient with the portability than the leg. However biped robot can accomplish many role height. But The two thing which we take the center to the leg and walk to the stability is not easy work. Therefore this proposal make efforts that we try to find technical element for the walking of the robot through its design and implementation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.3
• /
• pp.236-241
• /
• 2015

This paper presents a study on transformable multiple quadruped robots by docking between robots and waist joints. This robot is able to go on a variety of angles because of mecanum wheels. It is also a hybrid design which allows robot use legs to overcome obstacles on complex terrains and wheels to move on flat ground. The robot is applied kinematics of mecanum wheels and walking, and its walking is based on specific patterns. Docking module is located in front and backside of robot, docking algorithm is suggested and fulfilled for docking between 2 robots. A waist joint is at the center of robot body for transformation and after docking and transformation, robot can activate new functions that carry something.

• Journal of Internet of Things and Convergence
• /
• v.4 no.2
• /
• pp.7-11
• /
• 2018

In this paper, kinematic based walking pattern generation of biped walking robot is reviewed. Biped walking robot should be consisted of 6 Degree of Freedom(DOF) for each leg to walk properly in 3 dimensional circumstance. In this paper, simple structure of biped robot is depicted for walking pattern firstly. After fixing path of ankle of the robot, angle joints are coming from kinematic equatioins. Coordination of joints of a robot was set for dynamic analysis also. So walking pattern of a robot will be designed using dynamic equations of coordination of joint angles. Finally, setting of ankle of robot and pattern generation are key procedures of the robot walking.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.191-197
• /
• 2005

Biped walking is the main feature of a humanoid robot. In a biped walking robot, there are many actuators to be controlled and many sensors to be interfaced. In this paper, we propose a DSP-based controller for a miniature biped walking robot with 21 RC servo motors. The proposed controller has a hierarchical structure; a host PC, a DSP-based main controller, and an auxiliary controller with an FPGA chip. The host PC generates and transmits the robot walking data for given walking parameters such as stride, walking period, etc. The main controller implemented with a TMS320LF2407A controls 21 RC servo motors via the auxiliary controller. We also perform some experiments for balancing motion and walking on a slope terrain with interfacing a 2-axis acceleration sensor and a TMS320LF2407A.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.610-616
• /
• 2004

In the research of biomechanical engineering, robotics and neurophysiology, to clarify the mechanism of human bipedal walking is of major interest. It serves as a basis of developing several applications such as rehabilitation tools and humanoid robots. Nevertheless, because of complexity of the neuronal system that interacts with the body dynamics system to make walking movements, much is left unknown about the details of locomotion mechanism. Researchers were looking for the optimal model of the neuronal system by trials and errors. In this paper, we applied Genetic Programming to induce the model of the nervous system automatically and showed its effectiveness by simulating a human bipedal walking with the obtained model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.683-693
• /
• 2010

In this paper, we propose a new parallel mechanism for the legs of biped robots and the control of the robot's locomotion. A leg consists of two 3-DOF parallel platforms linked serially: one is an orientation platform for a thigh and the other is the 3-DOF asymmetric parallel platform for the shank. The desired locomotion trajectory is generated on the basis of the Gravity-Compensated Inverted Pendulum Mode (GCIPM) in the sagittal direction and the Linear Inverted Pendulum Mode (LIPM) in the lateral direction, respectively. In order to simulate the ground reaction force, a 6-DOF elastic pad model is used underneath each of the soles. The performance and effectiveness of the proposed parallel mechanism and locomotion control are shown by the results of computer simulations of a 12-DOF parallel biped robot using $SimMechanics^{(R)}$.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.38-45
• /
• 2005

In this paper, a bird type biped robot for entertainment controlled by R/C servo motors, is built using the embedded RTOS (Real Time Operating System). ${\mu}C/OS-II$ V2.00 is used fur RTOS and the board 80C196KC for main CPU. A control algorithm of R/C servo motors is proposed on ${\mu}C/OS-II's$ preemptive and deterministic property without any extra PWM module. The realized biped robot has 19DOF, that is, 12DOF for both legs, 6DOF for both arms and 1DOF for neck. To verify the proper walking process, ZMP(Zero Moment Point) theory is applied and the simulation has been done by ADAMS.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.46-52
• /
• 2004

In this paper, we introduce a case study of developing a miniature humanoid robot which has 16 degrees of freedom, 42 cm heights, and 1.5kg weights. For easy implimentation, the integrated RC-servo motors are adopted as actuators and a digital camera is equipped on its head. So, it can transmit vision data to a remote host computer via wireless modem. The robot can perform staircase walking as well as straight walking and turning to any direction. The user-interface program running on the host computer contains a robot graphic simulator and a motion editor which are used to generate and verify the robot's walking motion. The experimental results show that the robot has various walking capability including straight walking, turning, and stairs walking.