• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.1-8
• /
• 2016

The autoignition temperature (AIT) of a substance is the lowest temperature at which the vapor ignites spontaneously from the heat of the environment. The AIT is important index for the safe handling of flammable liquids which constitute the solvent mixtures in the process. This study measured the AITs of n-butanol+p-xylene mixture by using ASTM E659 apparatus. The AITs of n-butanol and p-xylene which constituted binary system were $340^{\circ}C$ and $557^{\circ}C$, respectively. The experimental AITs of n-butanol+p-xylene mixture were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation).

• Journal of environmental and Sanitary engineering
• /
• v.15 no.3
• /
• pp.88-93
• /
• 2000

The objective of this study was to depict the kinetic behavior of the platinum catalyst for the deep oxidation of VOCs and their mixture. The oxidation characteristics of VOCs, which were benzene, toluene, and styrene, was studies on a 0.5% $Pt/{\gamma}-Al_2O_3$ catalyst. The reactivity increases in order benzene>toluene>styrene. In mixtures, remarkable effects on reaction rate and selectivity have been evident ; the strongest inhibiting effect was shown by styrene and increases in a reverse order with respect to that of reactivity. The reaction model reveals that there is a competition between the two reactants for the oxidized catalyst. Thus, the nontoxic catalytic oxidation process was suggested as the new VOCs control technology.

• The Korean Journal of Applied Statistics
• /
• v.19 no.1
• /
• pp.135-148
• /
• 2006

Independent component analysis (ICA) is a statistical method for transforming an observed high-dimensional multivariate data into statistically independent components. ICA has been applied increasingly in wide fields of spectrum application since ICA is able to extract unknown components of a mixture from spectra. We focus on application of ICA for separating independent sources and predicting each composition using extracted components. The theory of ICA is introduced and an application to a metal surface spectra data will be described, where subsequent analysis using non-negative least square method is performed to predict composition ratio of each sample. Furthermore, some simulation experiments are performed to demonstrate the performance of the proposed approach.

• Journal of the Korean Chemical Society
• /
• v.41 no.2
• /
• pp.63-68
• /
• 1997

Calorimetric measurements have been carried out for the binary mixture between protic, ROH (R=Me, Et) and dipolar aprotic solvents, MeCN,$Me_2CO,\;MeNO_2(or EtNO_2)$in order to investigate the molecular interaction and liquid structure of isodielectric solvents. From the measured partial molar enthalpies of the solutions, excess enthalpies for the mixing process were determined. The hydrogen bond strength between two components decreases in the order of$ROH-ROH>ROH-Me_2CO>ROH-MeCN>ROH-MeNO_2(or EtNO_2)$and the hydrogen bond donor acidity decreases in the order of MeOH>EtOH. From this result, we can conclude that the most important interaction for the formation of binary liquid mixture comes from the specific hydrogen bond.

• The Korean Journal of Applied Statistics
• /
• v.20 no.2
• /
• pp.267-280
• /
• 2007

Various single-valued design optimality criteria such as D-, G-, and V-optimality are used often in constructing optimal experimental designs for mixture experiments in a constrained region R where lower and upper bound constraints are imposed on the ingredients proportions. Even though they are optimal in the strict sense of particular optimality criterion used, it is known that their performance is unsatisfactory with respect to the prediction capability over a constrained region. (Vining et at., 1993; Khuri et at., 1999) We assume the quadratic polynomial model as the mixture response surface model and are interested in finding efficient designs in the constrained design space for a mixture. In this paper, we make an expanded list of candidate design points by adding interior points to the extreme vertices, edge midpoints, constrained face centroids and the overall centroid. Then, we want to propose a robust design with respect to D-optimality, G-optimality, V-optimality and distance-based U-optimality. Comparing scaled prediction variance quantile plots (SPVQP) of robust designs with that of recommended designs in Khuri et al. (1999) and Vining et al. (1993) in the well-known examples of a four-component fertilizer experiment as well as McLean and Anderson's Railroad Flare Experiment, robust designs turned out to be superior to those recommended designs.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.309-314
• /
• 2012

To control degradation rate of biodegradable poly(lactide)s (PLA), the stereochemical PLAs with different ratios of $d$-lactide and $l$-lactide units were synthesized by the ring open polymerization and a degradation behavior was measured by a Langmuir film balance. Degradation rates of mixture monolayers on alkaline subphase were investigated as a function of optical purity of mixture component, 100, 99, 97 and 95%. As increasing their optical purity, melting temperatures of mixtures from stereocomplexation increased. The degradation rate of mixture monolayer with 100% optical purity was much slower than that of each homopolymer one and the others showed 2 step degradation behaviors. In the first step, the degradation which is faster than that of each homopolymer occurs in the uncomplexed region, and secondly, the degradation occurred in the complexed region which showed similar degradation rate to that of 100% optical purity. These results indicate that the alkaline degradation of stereochemical PLAs could be controlled by stereochemistry and stereocomplexation between enantiomer PLAs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.391-394
• /
• 1999

A feeding experiment was conducted using juvenile abalone (Haliotis discus hannai) to investigate the optimum level of supplemental vitamin and/or mineral premixes in a formulated diet for practical feed formulation. Three replicate groups of abalone averaging 100 mg were fed the diets containing different levels of vitamin premix ($0\%,\;0.5\%,\;1.0\%$ and $2\%$) and /or mineral premix($0\%,\;2\%,\;4\%$ and $6\%$) for 4 months. Survival rates of abalone showed no distinctive trend by the levels of dietary vitamin premixes. Weight gain, shell growth and soft body weight of abalone were not significantly affected by the different dietary vitamin and/or mineral premixes (P>0,05). Moisture, protein and lipid contents of soft body were influenced by experimental diets (P<0.05) but these differences also had no definite trends by levels of vitamin and/or mineral premixes. These data indicate that supplemental vitamin or mineral premix is not needed in this formulated diet, therefore price of diet for juvenile abalone could be reduced.

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.324-331
• /
• 1973

We study a mixture of ideal gases by use of recently developed methods in continuum thermodynamics of irreversible processes. A complete form of the free energy function and the gas law for each component are derived directly from an entropy production inequality by assuming that: (1) Constitutive functions depend on the mass densities, the diffusion velocities, the temperature and its gradient only. (2) Phenomenological coefficients appearing in an extra entropy flux are material constants. (3) The internal energy density per unit mass is independent of the total mass density (Joule).

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.286-291
• /
• 1997

Taxol which is recognized as a powerful anticancer reagent was extracted from yew extract and separated by NP-HPLC (Normal-PhaseHigh Performance Liquid Chromatography). The experiments were performed in the isocratic mode with $5{\mu}l$ to $100{\mu}l$ injection volume and 1ml/min mobile phase flow rate. The major mobile phase was hexane and small amounts of ethanol, methanol, 1-propanol and isopropanol were added to change the retention behavior. Prior to a real sample, the artificial mixture of taxol, cephalomannine and 10-deacetyltaxol was tested. They are hard to be separated because of similar chemical structures. The experimental results showed that the proper composition of mobile phase for separating the three components was found 96% hexane and 4% ethanol(vol.%) or 96% hexane, 2% 1-propanol and 2% methanol(vol.%). Compared to the run time of 80 minutes for the binary system, the mixture was separated within 50 minutes with the less amount of mobile phase for the ternary system. Finally, $1{\mu}g$ of taxol was separated from yew tree extracts under the optimum operating conditions.

• Journal of Life Science
• /
• v.29 no.10
• /
• pp.1086-1095
• /
• 2019

This research was performed to develop a new material consisting of a mixture of Red Allium cepa (RA) Cucurbita moschata duch (CM), and Angelica gigas Nakai (AG). RA and CM have low storage stability because of their high moisture content. Therefore, their major components were extracted and used for the research after a content analysis. In order to overcome these limitations, the quercetin from RA, ${\beta}-carotene$ from CM, and decursin/decursinol angelate (D/DA) from AG were separately extracted, and the biochemical activity of each extract and mixture was compared. RA was bioconverted by the Bacillus subtillis KJ-3 (BS3) after ethanol extraction. After bioconversion, the quercetin content of RA was increased by 128.9%. ${\beta}-carotene$ was detected in the CM ethanol extract and its content was very low concentrations at 0.2 mg/g. The AG ethanol extract (1 mg) contained 0.4146 mg and 0.3659 mg of D/DA, respectively. The purity of the D/DA was found to be about 78%. The flavonoid and polyphenol content of each extract and their mixtures (mixture 1 (RA:CM:AG = 5:2:3), mixture 2 (RA:CM: AG = 3:5:2), and mixture 3 (RA:CM:AG = 3:2:5)) were measured. In addition, the cell survival rate, anti-inflammatory activity, and antioxidant ability were also evaluated. In all the results, the antioxidant activity of mixture 3 was most effective. Therefore, these findings provide basic data for future food development using a 3:2:5 mixture of RA, CM, and AG.