• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.81-85
• /
• 2006

The motion of a system composed of a plate, constant springs and varying dampers is considered when the system is subject to harmonic force. Letting the frequencies of harmonic force and damper variation ${\Large f}_1\;and\;{\Large f}_2$, respectively, the displacement at the center of the plate has the strongest component at frequency ${\Large f}_1$. The angular displacement of the plate has strong components at ${\Large f}_1-{\Large f}_2$, and the natural frequency of the rotational mode of the system. If these two frequencies coincide, the plate oscillates with almost single frequency and a large amplitude. These results can be applied to development of a moment shatter with low frequencies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.956-959
• /
• 2003

In the semiconductor and the optical industry a new transport system which can replace the common system is required. The common systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system solve these problem. In this paper the object transport system using the excitation of ultrasonic wave is proposed. The experiments for finding the optimal excitation frequency, finding phase-difference between two ultrasonic wave get orators are performed. The effect of transporting speed according to the change of weight and amplification voltage are verified. In addition, the system performance for actual use is evaluated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.301-306
• /
• 2000

Small passenger and car carrier ships are mainly used as a connection way between land and small islands. And these ships should be designed to enlarge the capacity of passenger and car loading within limited space and draft. So the resonances of various vibrations exist in normal operation range of engine and propulsion shafting. In this paper, hull's superstructure vibration which was especially induced by the 1st order excitation of whirling vibration on the 2-engines and 2-propulsion shafting systems is introduced. Also these are verified via the theoretical analysis using transfer matrix method and FEA software ANSYS and its vibration measurement.

• Journal of Environmental Policy
• /
• v.11 no.3
• /
• pp.49-65
• /
• 2012

Road traffic noise is closely related to road traffic environment, including traffic volumes by type and travel speed. In this study, we stated some issues and analyzed the relationships between road traffic noise and traffic flow characteristics. First, in attempt to find the answer to the question "When does the loudest traffic noise occur?" we reviewed the issue in the terms of traffic flow. As a result of analyzing level of service through Korea Highway Traffic Noise model, the actual maximum noise occurred in level of service D rather than level of service E, on the capacity state. It shows that maximum noise would be most likely to occur right before and after the peak hours. Second, this paper was looking for the method of a more easy and accurate traffic speed estimation to predict traffic noise. This paper proposed sketch planning techniques of speed-volume curve by level of service on Korea Highway Capacity Manual. As a result of trend line modeling, it was judged that quadratic form is a suitable function, and coefficient of determination ($R^2$) was higher than 0.96, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2
• /
• pp.134-141
• /
• 2002

In this paper, a free wake analysis based on the curved vortex element and CVC wake model is used to predict the aerodynamic performance and noise for HAWT. Also for prediction of RPM, a maximum value through a quadratic regression was suggested. And for a noise prediction, the broadband noise prediction method based on experimental equation was used. The curved vortex element uses a BCVE and an SIVE instead of a straight vertex element. In the CVC wake model, the vortex strengths are assumed to be constant along a span and a vortex filament. The free wake structure made by the curved vortex element and CVC was substituted for a vortex lattice, so it has an advantage for the less calculation time and a depiction of accurate wake structure. For the verification of this program, calculated results are compared with Mr. Kim's experiment model and Zond Z-40FS for performance and with WTS-4 and USWP models for noise. Good agreements are obtained between the predicted and the measured data for the performance and far-field noise spectra.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.816-820
• /
• 2011

A method for increasing the difference of side-lobe level in spherical microphone array is presented. In array signal processing, it is known that narrow interval between sensors can increase the difference between main lobe and side-lobe of array response which eventually increase the source recognition capability. Recent commercial array being used, however, have shown certain limitation in using the number of sensors due to its costs and geometrical size of array. To overcome this problem, we have adapted MEMS sensors into spherical microphone array. To check out the improvement, two different types of spherical microphone array were designed. One array is composed with 32 regular instrument microphones and the other one is 85 MEMS sensors. Simulation and experiments were conducted on a sinusoidal noise source with two arrays. The time history data were analyzed with spherical harmonic decomposition and beamforming technique. 85 MEMS sensors array showed the improved side-lobe level suppression by more than 4 dB above the frequency content of 2 kHz compared to 32-sensor array.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.276-281
• /
• 1995

마모씨일과 발란스디스크에서의 로마킨효과가 3600rpm에서 운전되는 14단 터빈펌프의 동특성에 미치는 영향을 고찰한 결과 다음과 같은 결론을 얻을 수 있었다. 1. 14단 터빈펌프 시제품 해석을 위한 유한요소 모델링 및 해석결과는 실험적 모드해석을 통하여 5% 이내의 오차로 검증되었다. 2. 마모링 및 밸런스 디스크의 로마킨효과를 고려하였을 때 시제품 펌프의 위험속도는 그렇지 않았을 때에 비하여 1차의 경우 약 50% 상승하나 고차의 경우는 그 영향이 미미하였다. 그런데 1차 위험속도가 운전속도와 밀접한 관련이 있으므로 설계시 로마킨효과는 반드시 고려되어야 한다. 3. 마모링 및 밸런스디스크의 설계변경에 의하여 시제품 펌프의 강성을 변화시킬 경우 위험속도가 크게 변화하는 것으로 나타났다. 이를 이용하면 펌프의 심각한 구조변경 없이도 씨일의 적절한 설계에 의하여 임펠러 깃등의 고조화성분을 포함한 유해한 진동을 회피하는 동특성 설계가 가능하다. 향후 계속 연구사업으로서 씨일의 동특성 해석코드 개발 및 Wet Test를 통하여 본 연구결과를 검증하고 그 결과를 다단 터빈 펌프의 동특성 설게에 적용하여 고압 다단 터빈 펌프의 독자적 개발에 활용코자 한다.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.3 s.54
• /
• pp.539-553
• /
• 1996

The study was conducted from May to September in 1994 to investigate applicability of the Hearing Handicap Inventory for the Elderly-Screening version(HHIE-S) in parallel with the pure-tone audiometer to the initial screening test of noise-induced hearing loss(NIHL) in some noise-exposed workers. Subjects were selected by systemic sampling that took every 10th person from 6, 700 workers taking the annual occupational health examination by the department of Health Maintenance of Dongsan Hospital Keimyung University in Taegu. The authors administered the pure-tone audiometric test and self-reported questionnaire of HHIE-S including items of sociodemographic and job-related variables concurrently. The final subjects analysed were 1,019(488 males and 531 females) excluding fourteen persons who had many missing values in their questionnaires. The reliability coefficients of HHIE-S scale by Cronbach's alpha were 0.84. In the univariate analysis of hearing handicap measured by the HHIE-S, work duration, military service and the hearing threshold loss at 1KHz and 4KHz by the initial audiometer were significant in males while age, work duration and hearing threshold loss at 1KHz and 4KHz were significant in females. In the stepwise linear regression analysis, hearing threshold loss at 1KHz and 4KHz, was the only selected variable explaining the hearing handicap in males and hearing threshold loss at 1KHz and 4KHz, age, and work duration were selected in females. In ROC curves for HHIE-S scores against NIHL as gold standard which was defined by the follow-up audiogram as more than 30dB of the average of 0.5/1/2KHz and 50dB at 4KHz, the optimal cutoff for the parallel HHIE-S appeared to be 8. The results suggest that HHIE-S appeared to have some reliability and validity in this data and might be used in screening NIHL in parallel with pure-tone audiometer in noise-exposed workers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.713-721
• /
• 2014

In Europe and USA, new programs called GRC(Green Rotorcraft) and SRW (Subsonic Rotary Wing program) respectively, have been currently underway for developing the next generation rotorcraft. The final goal is to develope fuel-efficient/environmental-friendly tilt-rotor civilian rotorcraft, which can partly replace short-range regional aircrafts. Also for safe operation, the new rotorcraft technology is cooperated with the new air transport management(ATM) system, called SESAR(Single European Sky ATM Research) and NextGen(Next Generation Air Transport System) in Europe and USA. In addition to achieve the final goal, the tilt-rotor aircraft, they are trying to improve the performance of conventional helicopters by adopting more efficient propulsion system, active rotor system, and reducing internal and external noise. Especially in GRC program of Europe, the environmental factors such as noise, fuel efficiency, reduction of emission gas(CO2, NOx), are focused for the new technologies.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.4
• /
• pp.348-355
• /
• 2000

This paper described the relationship between the behavior of the Israeli carp, Cyprinus carpio and the environmental noise level due to the dynamite explosion work. The experiment was conducted in the cage ($L10{\times}W4{\times}D4 m$) of aquaculture located at Chungjoo Lake, Chechon, in 1997. The fish trajectory was obtained by the telemetry system in which a pulsed ultrasonic pinger ($50 kHz, {\phi}16{\times}L70 mm$) attached to the fish was tracked three dimensionally, and the underwater noise levels were measured. The results of the study were as follows: 1. The underwater noise levels in the normal blasting measured at a distance of 400 m from the source of noise increased by $40 dB (re 1 {\mu}Pa)$ compared to the levels before explosion. The dominant frequency and the increased power spectrum level of the underwater noise by the explosion work were $75 to 100 Hz and 22.9 to 35.3 dB$, respectively. 2. The underwater noise levels in the test blasting measured at a distance of 350 m from the source of noise increased by average $49.5 dB (re 1 {\mu}Pa)$compared to the levels before explosion. 3. The swimming area of the fish was reduced with the time after explosion, and after more than one hour the fish represented the similar swimming area and behavior to the status of right before explosion. 4, The swimming depth layer of the fish was most of the case at the sea surface less than 1,0 m except during explosion or right after of it. But the fish swam downward when an external stimulus like the explosion noise was given to the fish. 5. The average swimming speeds of the fish before, during and after the works were about 1.2 times, 1.9 times and 1.0 times of the body length, respectively, and the speed of the fish with explosion was faster 1.6 times than the speed without of that. Consequently, the explosion noise levels measured by this study were sufficiently high to affect the fish, and the heavy shock by the explosion works could produce a considerable unfavorable effects to the fish.