• Monthly Duck's Village
• /
• s.50
• /
• pp.88-89
• /
• 2007

오리 산업은 축산업 중 유일하게 2년 연속 두자릿수 성장세를 거듭하며 축산업의 새로운 소득원으로 급부상하고 있다. 특히 이러한 고성장에도 불구하고 오리고기 소비기반이 늘어나면서 높은 가격을 유지하는 것도 관련업계의 부러움을 사고 있다. 더욱이 2006년도에는 HPAI가 발생했음에도 불구하고 오리고기 소비는 큰 영향을 받지 않았다는 점도 오리 산업의 전망을 밝게 하는 부분이다. 이에 오리 산업의 견인차 역할을 하고 있는 업체를 소개하고자 한다.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.99-111
• /
• 2002

전산기술의 발달에 힘입어 근래에 모의실험을 이용한 연속교통류의 미시적 분석이 활발히 수행되고 있고 다양한 모의실험 전산모형이 소개되고 있다. 미시적 연속교통류 전산모의실험은 차량추종모형과 차로변경모형을 적용하여 다양한 운전자들의 차량운행행태를 모사하여 분석하는 실험이다. 전산모형은 난수를 토대로 차량의 자유속도와 초기 발생 차로를 배정하기 때문에 낮은 자유속도를 할당받은 차량이 높은 속도의 차로(예:1차로)로 발생되는 경우가 발생한다. 많은 모의실험모형이 사용하고 있는 차로변경의 가정이 "운전자는 자신이 원하는 속도(자유속도)를 유지한다"는 것이며 그러한 가정만의 적용으로 인해 현실적이지 않은 차로 이용률이 결과되고, 따라서 전산모형을 통한 교통류 흐름분석에 문제를 제공하고 있다. 본 논문에서는 미국 도로국에서 20여년 동안 개발되고 수정되어왔으며 현재 실용적으로 가장 많이 사용되고 있는 Freeway Simulation(FRESIM) 전산모형이 내재한 차로변경모형을 토대로 고속도로 기본구간에서의 선택적 차로변경모형을 제시한다. 제시된 모형에서는 (1)저속의 선행차량이 고속의 후행차량에게 차로를 양보하는 가정이 새롭게 추가되고 (2)FRESIM모형에서 사용하는 상수값을 국내 현장조사를 통하여 도출된 분포식을 통한 값으로 대체하였다. 수집된 자료분석결과 연속 교통류에서의 15% 차두시간은 1.34초이며 차로변경시간은 평균 2.22초인 F분포를 따르고, 자유속도는 정규분포를 따르는 것으로 결과되었다. 모의실험결과 무작위난수를 토대로 배정된 차로로 생성된 차량들이 새롭게 제시된 차로변경모형의 적용으로 현장 차로이용률을 95% 신뢰수준에서 모사하는 것으로 분석되었다.

• Weed & Turfgrass Science
• /
• v.5 no.3
• /
• pp.177-180
• /
• 2016

This study was conducted to identify problematic weed species in grape orchard fields to establish basic information for suitable weed control. Surveys of weed species occurring in grape orchards were conducted in Chungnam province including Daejeon and Sejong of Korea from April to June and from September to October in 2015. From the surveys, 50 weed species belonging to 23 families (33 annuals and 17 perennials) were identified. In the first survey, the most dominant weed species by the importance values was Poa annua (7.07) followed by Echinochloa crus-galli (6.56), Digitaria ciliaris (6.43) and Capsella bursapastoris (5.63). In the second survey, Rorippa palustris (9.59), Eclipta alba (9.13), Digitaria ciliaris (7.68) and Poa annua (7.68) were dominant. Different weed species and dominance patterns were detected according to weed control methods in the grape orchards. Seven weed species belonging to six families were identified in the field in which herbicides were being used as a weed control method. However, most weed species (21 species belonging to 9 families) were occurred in the mowing + tillage fields. These surveys provide information about seasonal variations of weeds species occurred in grape orchards and impact of different weed control methods on the weed occurrence.

• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.335-340
• /
• 2012

During the manufacturing process of chestnut, 50% of biomass is produced as chestnut shell (CS) or chestnut hull (CH), a forestry by-product. Due to its high fiber content and economic benefit, there is a possibility of using chestnut hull as a supplement for a ruminant diet. Few studies, however, have been conducted on evaluating nutritive value of chestnut hull for ruminant animals. The objective of this study were thus to analyze chemical composition of CS, a by-product after the first processing of chestnut, and CH, a by-product after the second processing, and access in vitro rumen fermentation characteristics of them. For the in vitro fermentation using strained rumen fluid obtained from a fistulated Hanwoo steer, commercial total mixed ration (TMR) for dairy goat was used as a basal diet and was replaced with different proportions of chestnut shell and hull. A total number of 13 treatments were carried out in this study: 100% TMR, 100% CS, 100% CH, a mix with 50% CS and 50% of CH (MIX), TMR replaced with 5%, 10%, or 15% of CS, CH, or MIX, respectively. For each treatment, in vitro dry matter digestibility (IVDMD) and pH after 48 hours of rumen fermentation were measured. Gas production at 6, 12, 24, 48 hours of incubation was also analyzed. Compared to CH, CS contains higher level of fiber (NDF, ADF, lignin) and consequently has a lower amount of non-fiber carbohydrate, but no difference was observed in the other nutrients (i.e. crude protein, crude fat, and ash). IVDMD was significantly (p<0.05) the highest in 100% CH (71.97%) and the lowest in 100% CS (42.80%). Addition of CH by replacing TMR did not affect IVDMD, while an increase in the proportion of CS tended to decrease IVDMD. The total gas production after 48 hours of incubation and the rate of gas production were also the highest in 100% CH and the lowest in 100% CS (P<0.05). Likewise, the pH after 48 hours of fermentation was significantly (p<0.05) the lowest in 100% CH (6.33) and the highest in 100% CS (6.50), and no significant difference in gas production was observed when TMR was replaced with CS or CH up to 15% (P>0.05). In conclusion, CH may successfully be used for a supplement in a ruminant diet. The nutritive value of CS is relative low, but can replace, if not 100%, low quality forage. This study provides valuable information about the nutritive value of CS and CH. An in vivo trials, however, is needed for conclusively accessing the nutritive value of CS and CH.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.237-245
• /
• 2003

Since the velocity is dependent on the fiber orientation in anisotropic composites, the application of traditional acoustic emission (AE) source location techniques based on the constant velocity to composite structures has been practically impossible. The anisotropy makes the source location procedure complicated and deteriorates the accuracy of the location. In this study, we have divided the region of interest(ROI) into a set of finite elements, taken each element as a virtual source, and calculated the arrival time differences between sensors by using the velocities at every degree from 0 to 90. The calculated and the experimentally measured values of the arrival time difference aye then compared to minimize the location error. The results from two different materials, namely AA6061-T6 and CFRP(uni-directional; UD, $[0]_{32}4$) laminate confirmed the practical usefulness of the proposed method.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.2
• /
• pp.206-218
• /
• 2020

Located mostly inside the megacity of Busan, the Busan Southern Port is a multifunctional port with various nearby industry activities, including a joint fish market, ship repair facilities, and fishing boat facilities. If toxic chemicals generated by the industrial activities continue to flow into and accumulate in the sediment of the port, they can affect aquatic ecosystems and humans. Therefore, in this study, distribution levels and potential influent sources of organic pollutants, including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and butyltin compounds (BTs), in the sediment were investigated. The sediment samples were collected from eight sampling sites in November 2013 (first phase) and November 2014 (second phase). The mean concentrations of PAHs, PCBs, and BTs in the first and second sampling phages were 4174.0 ng/g-dry wt. and 1919.0 ng/g-dry wt., 166.3 ng/g-dry wt. and 21 ng/g-dry wt., and 50.9 ng/g-dry wt. and 30.8 ng/g-dry wt., respectively. The concentrations of the organic pollutants detected in the seabed sediments were lower in the second phase than in the first phase. In this study, the inflow sources of PAHs, PCBs, and BTs were found to be combustion, land, and municipal sewage or industrial wastewater, respectively.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.57-65
• /
• 2002

The Electrical Power System (EPS) shall supply required power to maintain spacecraft and payload during the mission. The EPS sizing are based on space environment, satellite mission and lifetime, and allocated budgets. The type of the primary and secondary power is determined according to satellite design-level and allocated subsystem budgets. The design of EPS has closely related to system and others' subsystems design. To supply the sufficient power to the satellite, the implementation of the larger power source and energy storage is impossible actually. And there will be some problems of the attitude control of the satellite, the handling power capability of the electronic boxes, and launch vehicle selection caused by EPS oversizing. Also, the thermal control is not easy in the space by extra power. And the maintenance of the satellite within the specific orbit from orbit-drag is a big design burden of the thruster. So the various technologies have been developed to optimize the EPS sizing and to operate the power system efficiently.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.103-103
• /
• 2022

다복찰은 전라북도농업 기술원에서 2012~2020년에 신명흑찰과 익산488호를 교배하여 육성한 찰벼이며, 중대립, 단간, 내도복, 다수성의 특징을 보인다. 동진찰은 1998년도에 육성되었으며, 우리나라에서 가장 인기 있는 찰벼이다(재배면적 25,161ha/2021년 기준). 드문모심기 재배 기술은 2017년부터 도입되었으며, 밀파 육묘하여 재식밀도 및 재식주수를 감소함으로써 소요되는 재료비 등 경비 및 투입되는 노동력을 절감하는 경제성 있는 기술이다. 따라서 본 연구는 전라북도농업기술원에서 육성한 다복찰 보급 확대 및 가장 인기 높은 동진찰의 드문모심기 재배기술 확립 일환으로 시작되었으며, 2024년까지 3년간 실시할 계획이다. 시험은 기술원 논 포장에서 실시하였으며, 시험품종은 다복찰, 동진찰, 시험요인은 이앙시기(3처리) 및 재식밀도(4처리)를 두었다. 이앙시기별로 이앙 17일 전에 온탕소독(62℃, 10분), 종자소독(32℃, 1일), 침종(32℃, 1일), 간이출하(30℃, 3일) 과정을 거쳐 부직포 육묘(12일 정도)를 실시하였다. 5월20일(이앙520)부터 5월30일(이앙530), 6월9일(이앙609)까지 10일 간격으로 드문모심기 전용 이앙기로 이앙하였으며, 주당 본수는 5.7개 정도였다. 이앙 시기별로 시험포장을 구분하였고 포장내에 2품종, 각각 3.3m2당 80주, 60주, 50주, 37주 등 재식밀도 처리구를 두었으며, 처리구마다 3반복 조사구(10주/반복, 5본/주) 설치하였다. 10a당 9-4.5-5.7kg(N-P₂O₅-K₂O)를 밑거름(50%)-분얼거름(20)-이삭거름(30) 등 3회 거쳐 시비하였다. 중간물떼기는 이앙32일째부터 10일간 실시하였으며, 예상 출수 30일 전에 충분하게 담수하였다. 이앙20일째부터 10일 간격으로 경수, 초장, 엽색도 등 생육 조사, 그리고 출수기, 후기 생육 및 병해충을 조사하였다. 향후 수확기에 수량, 수량구성요소, 미질 및 품위를 분석할 계획이다. 시험토양은 pH 6.0~6.3, EC는0.68~0.85dS/m, 유기물함량은 52~57g/kg 수준으로 높았다. 동진찰 발아율(94.0~98.1%)이 다복찰(89.9~94.9%)보다 우수하였다(3~6%P ↑). 다복찰 묘 충실도(102~106mg/주)가 동진찰(79~101mg/주)보다 다소 좋았으며, 이앙530 묘소질이 가장 좋았다. 동진찰 초장은 다복찰에 비해 다소 길었으나 이앙시기 및 재식밀도별 초장의 변화 유형은 비슷하였다. 이앙520구의 80주에서 초장이 가장 작았고 이앙609구에서는 80주에서 다소 길었으나, 처리구간의 유의성은 없었다. 동진찰 및 다복찰 경수는 37주에서 이앙 후 40일째, 50주, 60주, 80주에서는 30일째 가장 컸다. 출수기는 다복찰에 비해 동진찰이 3~7일 정도 빨랐으며, 특히 이앙520 동진찰에서는 재식밀도가 높을수록 출수기가 빠른 경향을 보였으며, 이앙530 이후에는 재식밀도간 차이가 거의 없었다. 동진찰에 비해 다복찰 간장이 3~6cm 작았으며, 2품종 모두 이앙609구에서 가장 낮은 값을 보였다. 수장도 간장과 비슷한 경향을 보였다. 수수는 2품종 모두 이앙이 늦을수록 증가하였으며, 37주에서 가장 높았으며, 80주에 비해 다복찰, 동진찰 각각 73.8%, 77.4% 높았다. 다복찰의 경우 3.3m²당 수수는 이앙시기별과 관계없이 상대적으로 80주에서 가장 많았고 이앙520에서 재식밀도간 차이는 감소하였지만 이앙시기가 늦을수록 수수는 증가하는 경향을 보였다. 동진찰도 비슷한 경향을 보였으며, 이앙520과 이앙609 사이에 수수 차이는 적었다. 병 발생은 잎집무늬마름병, 세균성벼알마름병, 이삭누룩병이 주로 관찰되었으며, 세균성 벼알마름병은 출수기와 맞물린 이앙530에서 가장 크게 발생하였으며, 이앙520도 비슷한 경향을 보였다. 이삭누룩병 발생이 심하였는데 재식밀도간 차이보다는 이앙시기별 차이가 더 크게 발생하였으며 품종 간의 병 발생 차이는 없었다. 이상의 결과로 수수 측면에서 조기 이앙할 경우에는 50~60주, 늦은 이앙 시에는 80주가 유리할 것으로 보이며, 추후주당 립수, 등숙률, 천립중 등을 조사하고 경영비 등을 고려하여 합리적인 이앙시기 및 재식밀도를 판단할 수 있을 것으로 판단된다.

• Environmental and Resource Economics Review
• /
• v.33 no.1
• /
• pp.33-57
• /
• 2024

This study analyzes the purchase subsidy for electric light-duty vehicles in terms of environmental benefits and total cost of ownership(TCO). For the environmental benefits, we considered the emissions from the power generation mix and reflected the change in efficiency of electric vehicles according to the temperature distribution. The environmental benefits of driving electric vehicles were estimated to be between KRW 2.2 million and KRW 5.3 million. Also, the TCO of electric vehicles compared to diesel vehicles under the current purchase subsidy was estimated to be about KRW 3.6 million lower for business use and about KRW 6.6 million lower for non-business use. These results imply that it is reasonable to lower the unit price of the purchase subsidy even within the same budget. Moreover, the remaining budget could be better spent on upgrading the charging infrastructure, which would reduce the inconvenience of charging for potential buyers.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.403-407
• /
• 2018

Currently, the highest cancer death rate in Korea is lung cancer, which is a typical cancer that is difficult to detect early. Low-dose chest CT is being used for early detection, which has a greater lung cancer diagnosis rate of about three times than regular chest x-ray images. However, low-dose chest CT not only significantly reduces image resolution but also has a weak signal and is sensitive to noise. Also, air filled lungs are low-density organs and the presence of noise can significantly affect early diagnosis of cancer. This study used Visual C++ to set a circle inside a large circle with a density of 2.0, with a density of 1.0, which is the density of water, in which five small circle of mathematics have different densities. Gaussian noise was generated by 1%, 2%, 3%, and 4% respectively to determine the effect of noise on the mean value, the standard deviation value, and the relative noise ratio(SNR). In areas where the density difference between the large and small circles was greatest in the event of 1 % noise, the SNR in the area with the greatest variation in noise was 4.669, and in areas with the lowest density difference, the SNR was 1.183. In addition, the SNR values can be seen to be high if the same results are obtained for both positive and negative densities. Quality was also clearly visible when the density difference was large, and if the noise level was increased, the SNR was reduced to significantly affect the noise. Low-density organs or organs in areas of similar density to cancers, will have significant noise effects, and the effects of density differences on the probability of noise will affect diagnosis.