• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.270-280
• /
• 2014

In this study, to examine the causes of cracks in continuously reinforced concrete tracks (CRCTs) and the main factors affecting cracking, a field survey on the status of cracks and crack patterns in the Gyeong-bu high speed line was conducted, and the crack patterns of CRCT due to the temperature difference between the top of the slab (TCL) and the bottom of the subbase (HSB) and the drying shrinkage of concrete were predicted by a nonlinear finite element model considering the structure of CRCT. The results of the numerical analysis show that cracks will be developed at the interface between the sleeper and the TCL, and under the sleeper due to the temperature difference and concrete shrinkage. This corresponds well to the crack locations found in the field. Also, it is found that the most significant factors are the coefficient of thermal expansion with respect to the temperature difference, and the drying shrinkage strain with respect to shrinkage. According to the results, the reinforcement ratio should be carefully determined considering the structures of CRCT because the crack spacing is not always proportional to the reinforcement ratio due to the sleepers embedded in the TCL.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.339-340
• /
• 2017

화학공장의 누출사고는 초기에 적절히 대응하지 못할 경우 화재 폭발과 같은 2차 3차의 복합재난사고로 확산될 위험성이 매우 높다. 이러한 이유로 누출사고 발생 초기에 누출이 발생한 지점을 신속히 파악하여 현장안전요원에게 알림으로써, 보다 체계적이고 효율적인 초기대응을 가능하게 하여, 사고피해를 완화시킬 수 있는 통합적인 누출사고 대응시스템 구축은 매우 중요하다고 할 수 있다. 본 연구에서는, 통합적인 누출사고 대응시스템 구축을 위한 선행연구로, 딥러닝 기반의 누출원추적 모델 개발을 제안한다. 여수에 위치한 실제 화학공장을 대상으로 누출사고 시나리오에 대한 Computational Fluid Dynamics (CFD) 시뮬레이션을 진행한 뒤, 화학공장 경계면에 배치된 각 센서별 위치에서의 농도, 풍향 그리고 풍속데이터를 추출하고, 센서 좌표를 추가하여 인공신경망을 학습시켰다. 학습된 모델은 40개의 누출후보군에 대해 학습에 사용되지 않은 상황들에서도 75.43%의 정확도로 누출이 일어난 지점을 실시간 예측해냄을 확인하였다. 또한 누출지점 예측이 일치하지 않은 경우도, 예측된 지점이 실제 누출이 일어난 지점과 물리적으로 매우 인접함을 확인함으로써 제안된 모델을 실제 현장에 적용할시 기대되는 효과는 더 클 것으로 판단하였다.

• Research in Plant Disease
• /
• v.7 no.1
• /
• pp.31-36
• /
• 2001

To establish an effective chemical control strategy against powder mildew of sweet pumpkin (Cucurbita maxima Duchesne) caused by Sphaertheca fuliginea, screening of effective fungicides and determination of their application times were conducted. Powdery mildew caused by S. fuliginea began to occur at about 80 days after transplanting and continuously increased until harvesting in Korea. Systemic fungicides, such as difenoconazole, triforine, bitertanol, and triflumizole, were effective for controlling powdery mildew, showing control efficacies of about 80-90%. When the fungicide triflumizole was applied 3 or 4 times from the beginning day of the disease at 10-day intervals, about 92.0% and 94.6% of disease control and yield increase of 7% and 9% were obtained, respectively. Therefore, the proper application of triflumizole for controlling powdery mildew of sweet pumpkin must be done more than 3 times.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.490-499
• /
• 1989

These days the closed cycle gas turbine attracts considerable attention due to : (1) The possibility of directly coupling the closed cycle gas turbine with a high temperature gas cooled reactor ; (2) the economical use of dry coolers to reduce the thermal charge of the environment ; and (3) the reduction of pollution and energy consumption, by replacing the domestic hearth by a central heating and power station. In this paper, we selected the optimal cycle from the characteristic of thermodynamic cycle for the optimal design of closed CO$_{2}$ gas turbine cycle usuable in nuclear energy power plant. Also the effects of between the parameters and thermal efficiency were investigated by computer simulation. These results and design data will be added to basics in optimal designing closed CO$_{2}$ cycle gas turbine plant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.781-788
• /
• 2021

This paper is the study of a design to eliminate the communication error that occurs between the main controller and the servo controller of the K56 ammunition-carrying armored vehicle. The K56 assists in the operation of the K-55A1 self-propelled gun by automating the supply and loading of ammunition. The CAN communication board of the ammunition carrier is a key-function product mounted inside the main controller and installed for communication with the servo controller. It was confirmed that an undefined error would occur intermittently in the existing CAN communication board, interrupting the operation of the ammunition supply system during the loading process. In this paper, in order to solve the problem, the cause of the failure is identified through analysis and a functional test of the communication signal between the main controller and the servo controller. The error was resolved by redesigning and improving the Read/Write algorithm. Finally, the proposed cause analysis and design effectiveness were verified through the CAN communication board single item test and a system equipment application test. It is expected that this study will serve as a reference for improving defense capabilities through improving the reliability of CAN communication boards and by improving the reliability of the overall electronic equipment using DPRAM.

• Korean Journal of Ecology and Environment
• /
• v.44 no.4
• /
• pp.385-395
• /
• 2011

The adjustment processes and responses of a series of mining pits by sand or gravel mining were investigated by laboratory experiments. The filling processes of the two pits were affected by the bars developed in the upstream of the channel. However, the bars were not developed and the bed was degradated in the downstream of the pits due to little sediment flow, which was trapped in the pits. The submerged angle of repose in the pits was nearly constant when the pits were being filled. After the filling processes of the pits were finished, the pit was speedily filled with sediment, and the bed was aggradated and migrated with speed. However, the angle of repose decreased. As the distance between the upstream pit and the downstream pit increased, the bed of the pit downstream was tailcutted and degradated. The migration speed of the pit decreased. However, the dimensionless pit depth increased as the distance between the pits increased. The dimensionless pit depth increased with time.

• 전기의세계
• /
• v.39 no.10
• /
• pp.7-10
• /
• 1990

태양광에 의해 전기가 발생되는 광기전력 효과는 이미 19세기 중반에 발견 되었으며 이를 실제로 이용하기 시작한 것은 1950년대에 등대, 통신중계소 및 인공위성 전원용으로 사용하기 시작하면서 부터 인것은 잘 알려진 사실이다. 그후 선진 각국들은 꾸준한 연구개발 노력을 하여왔으나 태양전지를 민수용으로 사용키 위해 본격 개발을 시작한 것은 아무래도 70년대의 1,2차 석유파동을 겪은 후부터라고 생각된다. 기존의 화석에너지원에 비하여 많은 장점을 가지고 있으면서도 빠른 속도로 실용화가 되지 않았던 이유는 경제성이 현저히 뒤져있었기 때문이며, 기술적으로도 화석에너지나 원자력에 의한 대규모 전력생산을 대체 할 수 있는 수준과는 거리가 있기 때문이다. 그러나 관련기술 개발, 범 세계적인 환경에의 관심고조, 확석에너지원의 유한성에 대한 인식심화 등에 힘입어 탱양광발전은 그 나름대로의 수요 영역을 확보해 가는 추세이며 이는 관련기술 개발과 같은 내적인 변화와 화석에너지 가격의 변화, 환경규제의 강도 등 외적 환경 변화 속도에 따라 보다 가속화 될 전망이므로 우리나라의 태양광발전 기술개발 현황과 정부의 기술개발 전략, 제도 및 향후 수요 환경등을 개관해 보기로 한다.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.331-338
• /
• 2020

This study was conducted to cultivate new Lepista nuda varieties with shorter cultivation period and better fruiting body compared to that of wild strains, for mass production and commercial application. Eighteen genetic resources of L. nuda were collected and grown in boxes using rice straw-fermented growth medium. Four lines with fruiting bodies were formed and selected as cross-breeding lines. Although 657 combinations were crossed through monospore crossing, only 17 combinations were bred between the 'CBMLN-19' line and the 'CBMLN-30' line. Among them, 8 lines with fast mycelial growth and high density were selected. After inoculating the rice straw-fermented growth medium with 14 genetic resources and 8 cross-breeding lines, their incubation period was investigated. Six of the cross-breeding lines completed their incubation in 20 days, while 7 of the 14 genetic resources took more than 40 days to complete their incubation, reducing the incubation period by more than 20 days in most cross-breeding lines. After the incubations were completed, the clay loam soil was covered with for post-cultivation, and when the mycelial cultivation was complete, the formation of fruiting bodies was induced after scraping the mycelial bodies under these environmental conditions: 14℃, 95% relative humidity or higher, and 1,500 to 2,000 ppm CO2 concentration. The temperature was reduced to 6℃ at night, resulting in a low temperature shock. Thus, 4 lines of fruiting bodies occurred from two genetic resources 'CBMLN-31' and 'CBMLN-44' and two cross-bred lines 'CBMLN-96' and 'CBMLN-103'. After inoculation, the longest period for fruiting bodies to occur was 100 days for the control:, the genetic resource 'CBMLN-31', and the shortest period (45 days) was observed for the cross-breeding line 'CBMLN-103'. The result of the investigation of the fruiting body characteristics shows that the cross-bred line 'CBMLN-103' showed a small form with 1.9 g of individual weight and 123validstipes per box, which was the highest incidence among the four lines. Another cross-bred line, 'CBMLN-96', had an individual weight of 5.5 g, which is larger than that of 'CBMLN-103'; however, the number of valid stipes per box was 30 less than that of 'CBMLN-103'. Quantity analysis showed that the control, 'CBMLN-31', had the highest quantity of 783 g per box, followed by the cross-bred line, 'CBMLN-96' with 165 g per box, and then the 'CBMLN-103' with 232 g. The quantity of the two crossbred lines was lower than that of the control 'CBMLN-31'; however, the amount of fruiting bodies was higher, and the cultivation period was shortened by 32 to 33 days. Therefore, these two lines would be selected as superior lines.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.9
• /
• pp.28-34
• /
• 2002

In this paper, a new type predistorter using a low frequency intermodulation signals terms of harmonic generator is proposed. A vector modulator, in which fundamental signal is modulated with low frequency intermodulation signals derived from harmonic generator, generates predistorted third and fifth IM components. Using predistorted signals, intermodulation distortion signals of power amplifier suppressed. The suggested predistorter has been manufactured to operate in Korean PCS base-station transmitting band (1840~1870MHz). The test results show that the third IMD signal level is reduced more than 20dB and the fifth IMD signal is reduced about 10dB for CW two-tone signals. The predistorter improves the Adjacent Channel Power Ratio (ACPR) more than 10dB for CDMA (IS-95) signals.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.482-482
• /
• 2010

하수처리장에서 발생하는 유기성 슬러지는 대부분 해양투기에 의해 처분되고 나머지는 매립, 소각, 퇴비화 등으로 처분된다. 그러나 런던협약 '96 의정서' 발효에 의해 2012년부터 해양투기가 금지되고, 매립장 및 소각장의 신규건설은 님비(NIMBY) 현상에 의해 제한받기 때문에 효과적인 슬러지 처분 및 가용화 방법이 요구되고 있다. 현재 초음파[1]나 열처리[2], 오존[3,4], 미생물 처리[5,6] 등 물리, 화학, 생물학적 처리방안이 연구되고 있으나 이러한 방법들은 에너지 과소비, 2차 오염물질 발생에 따른 처리비용 증가 등의 단점을 가지고 있다. 따라서 본 연구에서는 기존의 연구 방법을 보안하고자 전기분해를 활용하여 슬러지 가용화를 시도함으로써 슬러지 발생을 저감시킬 수 있는 방법을 연구하였다. 본 실험에서는 전기분해를 위해 제작된 불용성 전극은 Titanium에 Iridium을 코팅하여 제작하였고, 최대 20V까지 전압을 고정시키고 시간에 따라 변화되는 전류와 전기전도도, pH 값을 관찰하였다. 실험에 사용된 활성슬러지는 3개월간 합성폐수로 순응화 시킨 후에 시료로 사용하였다. 전기분해에 의해 처리된 활성슬러지의 여액을 분석한 결과 SCOD, TN, TP 농도가 각각 510%, 9%, 106% 증가하였다. 이는 전기분해에 의해 미생물의 세포벽이 파괴되어 세포 내 물질들이 세포 외부로 용출되어 미생물들의 이용이 가능한 상태로 되었음을 알 수 있었다. 이는 국내 하 폐수의 낮은 C/N비 때문에 무산소조에 메탄올 같은 외부 탄소원을 공급하는 대신에 별도의 탄소원 공급 없이 가용화 된 슬러지를 반송시킴으로써 슬러지 저감에 따른 폐기 비용과 운전비용의 절감을 기대할 수 있어, 근본적인 슬러지 발생을 저감시킬 수 있는 해결책이라 할 수 있다.