• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.195-195
• /
• 2019

최근 센싱 기술과 정보화의 영향으로 하천에서 발생하는 다양한 정보들이 디지털화되어 저장되고 있으며, 이를 효율적으로 저장하고 관리하고자 하는 연구가 수행되고 있다. 특히, 과거에는 점, 선, 면으로 구성된 자료 위주로 구성되어 있어 수집된 자료를 주제별로 관리하는 레이어 형식으로 저장하여 자료를 표출하기 위한 목적으로 설계되었지만, 최근에는 영상자료, 시계열자료 등 기존의 자료와 다른 비구조적 형태의 자료가 발생함에 따라 하천 네트워크를 기반으로 한 하천공간정보를 관계형 구조로 설계하고 있다. 하천의 경우, 각 하천공간정보가 가지는 고유의 값을 활용하여 인접한 하천 네트워크를 구성하는 하천의 중심선 혹은 최심선을 기준으로 하천공간정보들을 관계성을 부여한다. 하지만 이러한 관계성은 자료의 저장, 관리, 제공에는 유리한 측면이 있지만 기하학적인 고려가 없기 때문에 공간정보로서 활용하기에는 한계가 존재한다. 쉽게 설명하면, 1차원 점에 해당하는 공간좌표는 가장 가까운 하천 네트워크를 대상으로 관계성 부여가 가능하지만, 2차원 선과 3차원 면에 해당하는 도형을 대표하는 위치가 공간적으로 많기 때문이다. 본 연구에서는 하천 네트워크 기반 공간정보가 관계성을 부여하되 하천공간정보가 가지는 기하하적 구조를 반영하기 위해 하천 네트워크를 중심으로 한 곡선좌표계 부여 방법을 제시하고자 한다. 하천은 실제로 연속적으로 변화하며, 곡선으로 이루어져 있기 때문에 공간적으로 직교좌표계를 활용하기 보다는 곡선좌표계를 활용하는 것이 더 적합한 것으로 알려져 있다. 실제로 많은 수치해석 모형에서는 곡선좌표계를 고려하여 수치해석을 수행하고 있으며, 도로나 교통 분야의 공간정보에서도 공간적 고려를 위해 곡선좌표계를 활용하는 것으로 알려져 있다. 본 연구에서는 하천 중심선 혹은 최심선을 기준으로 흐름방향 거리를 S, 횡방향 거리를 N으로 설정하여 곡선좌표계를 정의하였으며, 직교좌표계와 곡선좌표계간의 좌표변환을 위해 이차원 변환방법인 투영변환을 활용하였다. 본 연구에서 제시된 방법을 활용할 경우, 하천 네트워크 기반 공간정보가 자료 간의 관계성을 유지하며, 기하하적 고려가 될 것으로 사료된다.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.196-205
• /
• 1999

The existence. bifurcation. and the orbital stability of periodic motions, which is called nonlinear normal mode, in a nonlinear dual mass Hamiltonian system. which has 6th order homogeneous polynomial as a nonlinear term. are studied in this paper. By direct integration of the equations of motion. Poincare Map. which is a mapping of a phase trajectory onto 2 dimensional surface in 4 dimensional phase space. is obtained. And via the Birkhoff-Gustavson canonical transformation, the analytic expression of the invariant curves in the Poincare Map is derived for small value of energy. It is found that the nonlinear system. which is considered in this paper. has 2 or 4 nonlinear normal modes depending on the value of nonlinear parameter. The Poincare Map clearly shows that the bifurcation modes are stable while the mode from which they bifurcated out changes from stable to unstable.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.212-216
• /
• 2017

Aerodynamic analysis for the airfoil, KARI-11-180 having 18% thickness ratio, was performed with CFD techniques. The boundary layer grid was generated by projecting the wall grid normally and fine grid was placed behind the trailing edge to capture the wake accurately. The distance to the far boundary is 100 chords and the flow condition is same as the wind tunnel test condition. Transition SST and DES turbulence models were utilized for accurate prediction of the transiton point. The predicted lift is higher but the drag is predicted lower than the wind tunnel test. 3-dimensional results with airfoil models of which aspect ratio were 2 and 5 were compared with 2-dimensional results.

• Journal of Broadcast Engineering
• /
• v.14 no.5
• /
• pp.616-624
• /
• 2009

This paper presents a 3D stereoscopic TIP (Tour Into Picture) for Korean classical paintings being composed of persons, boat, and landscape. Unlike conventional TIP methods providing 2D image or video, our proposed TIP can provide users with 3D stereoscopic contents. Navigating a picture with stereoscopic viewing can deliver more realistic and immersive perception. The method firstly makes input data being composed of foreground mask, background image, and depth map. The second step is to navigate the picture and to obtain rendered images by orthographic or perspective projection. Then, two depth enhancement schemes such as depth template and Laws depth are utilized in order to reduce a cardboard effect and thus to enhance 3D perceived depth of the foreground objects. In experiments, the proposed method was tested on 'Danopungjun' and 'Muyigido' that are famous paintings made in Chosun Dynasty. The stereoscopic animation was proved to deliver new 3D perception compared with 2D video.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.175-182
• /
• 2012

The scattered radiation always occurs when X-ray strikes the object. To absorb the scattered X-rays, the antiscatter grids are used, however these grids images are superimposed in the projection radiography images. When those images are displayed on the monitor, moir$\acute{e}$ patterns are overlapped over the images and disturb the anatomical informations. Most of the researches performed to date removed the grid noises by calculating or observing those frequencies in one dimensional frequency domain, two dimensional wavelet transform or Fourier transform. Those methods filtered not only the grid noises but also diagnostic informations. In this paper, we proposed the combined wavelet packet-Fourier method to remove the grid artifact in CR images. For the phantom image, the proposed method achieved from 5.2 to 7.4 dB better than others in SNR and for CR images by rejecting the grid noise bands effectively while leaving the remaining bands unchanged, the loss of images could get minimal results.

• The Korean Journal of Applied Statistics
• /
• v.19 no.2
• /
• pp.361-368
• /
• 2006

There are lots of two and three dimensional graph representing two dimensional categorical data. Among them, Li, et al. (2003) proposed Diamond Graph that projects three dimensional graph into two dimension whereby the third dimension is replaced with a diamond shape whose area and middle and vertical and horizontal lengths represent the outcome. In this paper, we use the Diamond graph to test the independence of two predictor variables for two dimensional data. And this graph could be applied for finding the best fitted log-linear model to three dimensional data.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.171-182
• /
• 2015

We propose a camera system to acquire indoor stereo omni-directional images and its calibration method. These images can be utilized for indoor precise mapping and sophisticated imagebased services. The proposed system is configured with a rotating stereo line camera system, providing stereo omni-directional images appropriate to stable stereoscopy and precise derivation of object point coordinates. Based on the projection model, we derive a mathematical model for the system calibration. After performing the system calibration, we can estimate object points with an accuracy of less than ${\pm}16cm$ in indoor space. The proposed system and calibration method will be applied to indoor precise 3D modeling.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.2
• /
• pp.29-39
• /
• 2017

This paper presents a unified framework to efficiently and realistically simulate surface and wave foams. The framework is designed to first project 3D water particles from an underlying water solver onto 2D screen space in order to reduce the computational complexity of determining where foam particles should be generated. Because foam effects are often created primarily in fast and complicated water flows, we analyze the acceleration and curvature values to identify the areas exhibiting such flow patterns. Foam particles are emitted from the identified areas in 3D space, and each foam particle is advected according to its type, which is classified on the basis of velocity, thereby capturing the essential characteristics of foam wave motions. We improve the realism of the resulting foam by classifying it into two types: surface foam and wave foam. Wave foam is characterized by the sharp wave patterns of torrential flow s, and surface foam is characterized by a cloudy foam shape even in water with reduced motion. Based on these features, we propose a technique to correct the velocity and position of a foam particle. In addition, we propose a kernel technique using the screen space density to efficiently reduce redundant foam particles, resulting in improved overall memory efficiency without loss of visual detail in terms of foam effects. Experiments convincingly demonstrate that the proposed approach is efficient and easy to use while delivering high-quality results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.161-168
• /
• 2015

Horizontally curved bridges are subjected to torsional loads by their vertical dead loads only as well as eccentric loads, which cause negative reactions at supports. In this paper, effects of bridge curvature on vertical reactions at supports are investigated for 48.8 m length simple span steel box girder bridges with elastomeric bearings by varying curvature angle from 0.49 to 1.35 rad. In order to expect magnitude and direction of reactions including possibility of negative reactions, reaction evaluation equations have been analytically developed by separating a superstructure of curved bridge into independent components. Concrete slabs and bottom flanges in steel box section are assumed geometrical annular sectors in area dimension, and top flanges and webs that have very narrow projected areas are assumed geometrical arcs in line dimension. Proposed equations have relatively simple forms and prediction values are on very good agreement with those from finite element analyses by difference of 1% order.

• The KIPS Transactions:PartB
• /
• v.16B no.5
• /
• pp.347-358
• /
• 2009

In this thesis, we develop a vision based hand motion recognition system using a camera with two rotational motors. Existing systems were implemented using a range camera or multiple cameras and have a limited working area. In contrast, we use an uncalibrated camera and get more wide working area by pan-tilt motion. Given an image sequence provided by the pan-tilt camera, color and pattern information are integrated into a tracking system in order to find the 2D position and direction of the hand. With these pose information, we estimate 3D motion plane on which the gesture motion trajectory from approximately forms. The 3D trajectory of the moving finger tip is projected into the motion plane, so that the resolving power of the linear gesture patterns is enhanced. We have tested the proposed approach in terms of the accuracy of trace angle and the dimension of the working volume.