• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.103-112
• /
• 2005

In this paper, in order to derive the current-voltage characteristics of n-AlGaN/GaN HEMTs with the piezoelectric and spontaneous polarizations, we suggested analytical solutions for the two-dimensional Poisson equation in the AlGaN and GaN regions by taking into account the longitudinal field variation, field-dependent mobility, and the continuity condition of the channel current flowing in the quantum well. Obtained expressions for long and short channel devices would be applicable to the entire operating regions in a unified manner. Simulation results show that the drain saturation current increases and the cutoff voltage decreases as drain voltage increases. Compared with the conventional models, the present model seems to provide more reasonable explanation for the drain-induced threshold voltage roll-off and the channel length modulation effect.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.164-175
• /
• 2011

Using natural electromagnetic (EM) fields at low frequencies, magnetotelluric (MT) surveys can investigate conductivity structures of the deep subsurface and thus are used to explore geothermal energy resources and investigate proper sites for not only geological $CO_2$ sequestration but also enhanced geothermal system (EGS). Moreover, marine MT data can be used for better interpretation of marine controlled-source EM data. In the interpretation of MT data, MT modeling schemes are important. This study improves a three dimensional (3D) MT modeling algorithm which uses edge finite elements. The algorithm computes magnetic fields by solving an integral form of Faraday's law of induction based on a finite difference (FD) strategy. However, the FD strategy limits the algorithm in computing vertical magnetic fields for a topographic model. The improved algorithm solves the differential form of Faraday's law of induction by making derivatives of electric fields, which are represented as a sum of basis functions multiplied by corresponding weightings. In numerical tests, vertical magnetic fields for topographic models using the improved algorithm overcome the limitation of the old algorithm. This study recomputes induction vectors and tippers for a 3D hill and valley model which were used for computation of the responses using the old algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.813-823
• /
• 1998

This paper analyzed the circularly polarized conformal microstrip patch antennal using the unsplit anisotropic perfectly matched layer(UAPML) method. Also, this paper are treated effectively the edge and corner parts on the 3 dimensional UAPML. Especially, to analyze microstrip patch antennas with the coaxial feeder line, it was applied to mixed the UAPML with Mur's first order absorbing boundary condition. Therefore this paper suggest the new the method to mix the UAPML with Mur's first order absorbing boundary condition. The results show the time responses of electromagnetics $E_z$ and $H\chi'$, input impedances of coaxial cable and radiation patterns of strip parchs on the single and the array patchs with central frequencies 1.575 GHz, 1.778 GHz and 4.8 GHz in L-band and C-band for mobile communication. The results of this paper shows that its results was compared the Mur's first order abc and mixed the second order dispersion boundary condition(SDBC) with the Mur's first order absorbing boundary condition. In accordance with, the validity of the method is confirmed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.1-7
• /
• 2009

In this paper, a simple analytical model for deriving the threshold voltage of a short-channel intrinsic-body SDG SOI MOSFET is suggested. Using the iteration method, both Laplace equations in intrinsic silicon body and gate oxide are solved two-dimensionally. Obtained potential distributions in both regions are expressed in terms of fourth and fifth-order of the coordinate perpendicular to the silicon channel direction. Making use of them, the surface potential is obtained to derive the threshold voltage in a closed-form. Simulation results show the fairly accurate dependencies of the threshold voltage on the various device parameters and applied bias voltages.

• Geophysics and Geophysical Exploration
• /
• v.27 no.3
• /
• pp.181-195
• /
• 2024

This tutorial explains that the static effect in the magnetotelluric (MT) survey is a physical phenomenon caused by charges accumulated on the boundaries of subsurface inhomogeneities. To facilitate understanding of the physical phenomenon, differences between static induction and charge accumulation on the boundary are explained and analyzed with help of schematic illustrations. Subsequently, from the electromagnetic (EM) integral equation formulation, it is clearly shown that the secondary electric field due to charges accumulated on the interface in the presence of the primary field appears as the static effect. Therefore, except in the cases of the layered earth or a two-dimensional earth with transverse magnetic (TM) mode excitation, the static effect always exists in MT responses and further, it is not 'static' but rather frequency dependent. Despite the fact that the static effect is a secondary electric field due to inhomogeneity, inevitable under-sampling in the frequency and spatial domains prevent the effect from being handled properly in numerical inversion. Therefore, considering the practical aspects of the MT survey, which cannot be a continuous measurement covering the entire survey area over a wide frequency band, a three-dimensional (3-D) inversion incorporating the static shift as a constraint with the Gaussian distribution is introduced. To enhance understanding of the integral equation EM modeling, the formulation of the 3-D integral equation and mathematical analyses of the Green tensor and scattering current are described in detail in the Appendix.

• Economic and Environmental Geology
• /
• v.35 no.6
• /
• pp.567-573
• /
• 2002

Two-dimensional MT (Magneto-Telluric) modeling is performed to verify the validity of difference arrow for GDS(Geomagnetic Depth Sounding) survey. The electromagnetic mutual coupling between the sea and in-land conductor is used as a criterion that judges the validity of difference arrow. In this study, the mutual coupling between them is examined according to the spatial distance between them and the period of magnetic variations. The difference arrow is valid for conductors located at surface which are far from the sea or when the long period is used, but the mutual coupling is weak for buried conductor in all the periods. However, when a conductor extends vertically down to the deep part, the validity of difference arrow is in doubt, since the strong mutual coupling influences up to the long period. Therefore, to remove the known conductor effect such as sea effect from the observed induction arrow, the mutual coupling between them must be examined and the caution must be exercised in interpreting the resultant difference arrow if mutual coupling between them is strong.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.1
• /
• pp.23-26
• /
• 2003

This paper presents conceptual design and 3-D electromagnetic analysis of IMVA transformer with BSCCO-2223 High Tc Superconducting (HTS) tapes. The rated voltages of each sides of the transformer are 22.9 kV and 6.6 kV, and double pancake windings were adopted. High voltage and Low voltage sides were composed of several double pancake windings. Four HTS tapes were wound in parallel for the windings of low voltage side and were transposed in order to distribute the currents equally in each conductor The transformer core was designed as a shell type core made of laminated silicon steel plates and the core is separated with the windings by a cryostat with Fiberglass Reinforced Plastics(FRP). A sub-cooling system using L$N_2$ were designed to maintain the coolant temperature 65K. Finally perpendicular components of magnetic field applied to tapes were calculated 0.247 in the rated operation using 3-D analysis. A real 1MVA HTS transformer will be manufactured in near future based on the design parameters presented in this paper.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.127-127
• /
• 2023

지표수와 하상 경계층에서 발생하는 흐름 교환은 하천, 호소, 연안, 해안 등 자연계에 존재하는 수환경시스템에서 일반적으로 나타나는 수리학적 특성으로서, 흐름 교환이 발생하는 경계층 아래 하상층 영역을 혼합대(hyporheic zone)라 부른다. 수질오염사고 등에 의해 외부의 오염물질이 하천 내 유입될 경우, 혼합대 흐름에 의해 하상층으로 침투되고 지표수 대비 유속이 느린 하상 내 공극 흐름에 의해 거동함에 따라 이들의 하천 내 체류시간이 증가하게 된다. 따라서, 본 연구에서는 지표수와 하상 흐름을 연계한 수치해석 방법을 적용하여 혼합대가 지표수 내 용질 체류시간에 미치는 영향을 분석하였다. 먼저 연직 2차원 Reynolds 평균 Navier-Stokes(RANS) 방정식과 Darcy 방정식을 연계하여 지표수와 하상 내 흐름을 해석하였다. 지표수 영역은 RANS 방정식을 이용하여 모의하였고, 지표수 흐름해석에서 얻어진 하상의 압력장을 경계조건으로 하여 Darcy 방정식과 함께 하상 내 흐름을 모의하였다. 여기서 하상의 형태는 자연계 하천에서 일반적으로 관찰되는 사련하상(Ripple bed)으로 모사하였다. 이후, 지표수-하상 연계모의를 통해 얻어진 흐름 결과를 바탕으로 지표수-하상 경계층에서 용질거동을 모의하였다. 흐름 모의결과를 과거 실험자료와 비교한 결과, 지표수 영역 내연직흐름 분포를 정확하게 재현하였고, 동시에 혼합대 흐름 구조에 큰 영향을 미치는 지표수-하상 경계층 압력 분포 역시 관측값과 유사하게 나타났다. 용질거동 해석을 통해 얻어진 용질의 체류시간을 분석한 결과, 혼합대 흐름이 고려된 경우(투수성 하상)와 고려되지 않은 경우(불투수성 하상)를 비교했을 때 전자에서 체류시간 분포의 감수곡선이 길어지고 첨두농도가 감소하는 것으로 나타났다. 아울러, 지표수 영역의 유입부 경계의 평균 유속이 증가함에 따라 최대 체류시간이 감소하는 것으로 나타났는데, 이는 지표수-하상 경계층에서의 압력 경사가 커져 혼합대 내 유속이 증가함에 기인하는 것으로 분석되었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.199-204
• /
• 2021

In this study, an isogoemetric analysis (IGA) method that uses NURBS (Non-Uniform Rational B-Spline) basis functions in computer-aided design (CAD) systems is employed to account for the geometric exactness of curved electrodes constituting an electro-adhesive pad in electrostatic problems. The IGA is advantageous for obtaining precise normal vectors when computing the electro-adhesive forces on curved surfaces. By performing parametric studies using numerical examples, we demonstrate the superior performance of the curved electrodes, which is attributed to the increase in the normal component of the electro-adhesive forces. In addition, concave curved electrodes exhibit better performance than their convex counterparts.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.555-565
• /
• 2021

The goal of this study is to improve flow and noise performances of existing backward-curved blade centrifugal fan system used for circulating cold air in a refrigerator freezer by optimally designing airfoil shape. The unique characteristics of the system is to drive cold airflow with two volute tongues in combination with duct system in a back side of a refrigerator without scroll housing generally used in a typical centrifugal fan system. First, flow and noise performances of existing fan system were evaluated experimentally. A P-Q curve was obtained using a fan performance tester in the flow experiment, and noise spectrum was measured in an anechoic chamber in the noise experiment. Then, flow characteristics were numerically analyzed by solving the three-dimensional unsteady Navier-Stokes equations and noise analysis was performed by solving the Ffowcs Williams and Hawkins equation with input from the flow simulation results. The validity of numerical results was confirmed by comparing them with the measured ones. Based on the verified numerical method, blade inlet and outlet angles were optimized for maximum flow rate using the two-factor central composite design of the response surface method. Finally, the flow and noise performances of a prototype manufactured with the optimum design were experimentally evaluated, which showed the improvement in flow and noise performance.