• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.189-197
• /
• 2007

Concrete tunnel lining must be designed to having the fireproof performance because the lining are sometimes exposed to very high temperature due to traffic accident. Such fire temperature may cause explosion of concrete, or collapse of tunnel structure. The purpose of this study is to obtain the fundamental fireproof behavior of fire resistance-engineered cementitious composites(FR-ECC) under fire temperature in order to use the fire protection material in tunnel lining system. The present study conducted the experiment to simulate fire temperature by employing 2 types of FR-ECC and investigated experimentally the explosion and cracks in heated surface of these FR-ECC. Employed temperature curve were hydro carbon(HC, ECl) criterion, which are severe in various criterion of fire temperature. The numerical analysis is carried out the nonlinear transient heat flow analysis and verified against the experimental data. The complex features of behavior in fire conditions, such as thermal expansion, plasticity, cracking or crushing, and material properties changing with temperature are considered. By the use of analytical model, the concrete tunnel subjected to fire loads were analyzed and discussed. With comparison of current concrete materials and FR-ECC, the experimental and analytical results of FR-ECC shows the better fire resistance performance than the other.

• Journal of Chest Surgery
• /
• v.30 no.4
• /
• pp.396-401
• /
• 1997

Tailoring thoracoplasty is employed prior to, following, or concomitant with pulmonary resection when it is anticipated that insufHclent lung tissue will remain to fill the pleural space following a pulmonary resection. This study reviewed a series of eight patients treated with tailoring thoracoplasty between 1990 and 1995. Indications were to close a persistent space In four patients and to tailor the thoracic cavity to accept diminished lung volume concomitant with a pulmonary resection in the other four patients. The primary underlying disease was lung cancer in three patients and pulmonary tuberculosis In five patients, two of whom had concomitant aspcrgilloma, two, pneumothora , and one, empyema with bronchopleural fistula. In four patients with a prior pulmonary resection, the tailoring thoracoplasty was performed within eight days after the resection surgery. There was no failure to accommodate the thoracic cavity to insufficient lung tissue, even though two patients needed a second thoracoplasty. We conclude that tailoring thoracoplasty may be performed to close anticipated persistent pleural space and to accommodate diminished lung volume with acceptable cosmetic results Early, after, or concomitant with pulmonary resection in selected patients.

• Journal of Chest Surgery
• /
• v.32 no.3
• /
• pp.287-293
• /
• 1999

Background: Medical treatment of multiple drug resistant(MDR) pulmonary tuberculosis has been quite unsuccessful. We analyzed our experience to identify the benefits and complications of the pulmonary resection in MDR pulmonary tuberculosis. Material and Method: A retrospective review was performed in 27 patients who unerwent pulmonary resection for MDR pulmonary tuberculosis between January 1994 and March 1998. Mean age was 40 years and the average history of diagnosis prior to surgery was 3.1 years. All had resistance to an average of 4.4 drugs, and received second line drugs selected according to the drug sensitivity test. Most patients (93%) had cavitary lesions as the main focus. Bilateral lesions were identified in 19 patients (70%), however, the main focus was recognized in one side of the lung. Eleven patients (41%) were converted to negative sputum smear and/or culture before surgery. Result: Pneumonectomy was performed in 9 patients, lobectomy in 16 and segmentectomy in 2. There was no operative mortality. Morbidity had occurred in 7 patients (26%), prolonged air leak in 3 patients, reoperation due to bleeding in 2, bronchopleural fistula in 1, and reversible neurologic defect in 1. Median follow up period was 15 months (3-45 months). Sputum negative conversion was initially achieved in 22 patients (82%), and with continuous postopertive chemotherapy negative conversion was achieved in other 4 patients (14%). Only one pneumonectized patient (4%) failed due to considerable contralateral cavity. Conclusion: For patients with localized MDR pulmonary tuberculosis and with adequate pulmonary reserve function, surgical pulmonary resection combined with appropriate pre and postoperative anti-tuberculosis chemotherapy can achieve high success rate with acceptable morbidity.

• Journal of Animal Environmental Science
• /
• v.10 no.3
• /
• pp.141-154
• /
• 2004

The solar powered water pump is very ideal equipment because solar power is more intensive when the water is more needed in summer and it is very helpful in the rural area, in which the electrical power is not available. The average so]ar radiation energy is 3.488 kWh/($m^2{\cdot}day$) in Korea. In this study, the automatic control logic and system of the water pump driven by the radiation energy were studied, designed, assembled, tested and analyzed for realizing the solar powered water pump. The experimental system was operated automatically and the cycle was continued. The average quantity of the water pumped per cycle was about 5,320 cc. The cycle time was about 4.9 minutes. The thermal efficiency of the system was about $0.030\%$. The pressure level of the n-pentane vapour in flash tank was 150$\%$450 hPa(gauge) which was set by the computer program for the control of the vapour supply. The pressure in the condenser and air tank during cycles was maintained as about 600 hPa and 1,200 hPa respectively. The water could be pumped by the amount of 128kg/($m^2{\cdot}day$) with the efficiency of $0.1\%$ and the pumping head of 10 m for the average solar energy in Korea.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.170-178
• /
• 2015

In this study, it was developed eco-friendly alkali-activated slag fiber reinforced concrete using ground granulated blast furnace slag, alkali activator (water glass, sodium hydroxides), and steel fiber. Eight reinforced concrete beam using alkali-activated slag concrete were constructed and tested under monotonic loading. The major variables were mixture ratio of alkali activator, mixed/without of steel fiber. Experimental programs were carried out to improve and evaluate the flexural performance of such test specimens, such as the load-displacement, the failure mode, the maximum load carrying capacity, and ductility capacity. All the specimens were modeled in scale-down size. The reinforced concrete beams using the eco-friendly alkali-activated slag fiber reinforced concrete was failed by the flexure or flexure-shear in general. In addition, the maximum strength increased with the adding the mol of sodium hydroxide, and the specimen reinforced the steel fiber showed the value of maximum strength which is increased by 15.8% through 25.9%. It is thought that eco-friendly alkali-activated slag fiber reinforced concrete can be used with construction material and product to replace normal concrete. If there is applied to structures such as precast concrete member and production of 2nd concrete product, it could be improved the productivity and reduction of construction duration etc.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.879-883
• /
• 2005

우리나라는 하천유역의 도시화 추세 속에 불투수층의 증가로 빗물의 일시 유출로 인한 홍수발생으로 많은 인명과 재산피해가 발생하고 있어 방재적 차원에서의 수자원관리가 시급한 실정이다. 또한, 초기 빗물과 합류식 하수도의 월류수에 의한 하천, 호소, 및 습지의 수질오염문제도 많이 발생하고 있다. 이러한 문제를 해결하기 위하여 콘크리트로 제작된 PC 지하식 빗물저류시설로서 상부의 공간은 공원, 운동장, 주차장 등 다양하게 이용하면서 방재와 치수를 가능케 할 수 있다. 또한, PC 콘크리트 빗물저류조는 현장 타설이 아닌 PC콘크리트 블록을 현장에서 조립하여 시공기간이 대폭적으로 단축되고, 작업환경 및 주변환경을 개선시킬 수 있다. 또한, 지하수의 보전, 회복을 위한 빗물저류 침투 시설 역할도 수행하여 비상용수를 확보하고 여름철 홍수 시 빗물을 가두어 재해를 방지하는 등의 다목적 시설로 활용된다. 지하 매립형 빗물저류조는 기존의 암거설계기준을 참조하여 일본의 내진설계 기준을 반영하였으며, 고강도 콘크리트를 사용하여 강도 또한 뛰어나다. 그리고 시공이 간편하고 공기의 단축에 탁월한 효과를 나타내며, 빗물저류조 설치는 다음과 같은 특징이 있다. 1. 지하저류형 빗물저류조 시설로 설계되어 토지의 효과적인 이용이 기대된다. 2. 공사기간이 짧아 경제적이다. 3. 안정된 구조체이다. 4. 부지의 형태에 맞춘 시공이 가능하다. 5. 소규모에서 대규모의 유수지까지 광범위하게 대응이 가능하다. 6. 방재역할 수행 및 빗물이용의 역할을 담당할 수 있다. 7. 불투수층이 증가하고 있는 도시지역에서 적극 활용가능하다.로 판단된다.한 예비방류의 시행과 강우종료 후에도 이수용량에는 손실이 없는 저수지의 관리방안의 지침이 되는데 효율적이라 판단되었다. 방법을 개발하여 개선시킬 필요성이 있다.>$4.3\%$로 가장 근접한 결과를 나타내었으며, 총 유출량에서도 각각 $7.8\%,\;13.2\%$의 오차율을 가지는 것으로 분석되어 타 모형에 비해 실유량과의 차가 가장 적은 것으로 모의되었다. 향후 도시유출을 모의하는 데 가장 근사한 유출량을 산정할 수 있는 근거가 될 것이며, 도시재해 저감대책을 수립하는데 기여할 수 있을 것이라 판단된다.로 판단되는 대안들을 제시하는 예비타당성(Prefeasibility) 계획을 수립하였다. 이렇게 제시된 계획은 향후 과학적인 분석(세부평가방법)을 통해 대안을 평가하고 구체적인 타당성(feasibility) 계획을 수립하는데 토대가 될 것이다.{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.88-88
• /
• 2002

인공수정 및 수정란기술의 활성화에 따라 소에 있어서 인공수정은 90%이상이 실시되고 있으나, 수정란이식은 수정란의 생산이 안정적이지 않아 활성화에 많은 지장을 초래하고 있다. 이의 원인은 수정란이식에 의한 수태율의 저하가 가장 크며, 수태율 향상을 위하여 수란우에 progesterone, hCG 등의 주사가 실시되고 있다. 그러나 이는 수정란의 착상에 있어서 자궁의 환경을 개선한다고 하나, 착상의 정확한 기전의 구명은 미미한 상태이다. 한편 비장유래 macrophage가 황체를 자극하고 TGF-$\beta$의 생산을 유도하는 것으로 보고되고 있으며, IL-I $\alpha$와 $\beta$에 따라 TGF-$\beta$ 생산에 있어서 약간의 차이를 보이는 것으로 보고되고 있다. 따라서 본 연구는 비장유래 macrophage가 TGF-$\beta$의 생산시 임신관련 Cytokine인 IL-I$\alpha$와의 관계를 조사하기 위하여 실시하였다. 임신 및 비임신 도축 암소의 비장을 채취하여 얼음에 채워 실험실로 운반한 후 비장의 표면을 70%의 알콜로 세척하고, 표피를 벗겨 비장조직을 세절하여 10% FBS+DMEM에 넣어 조직을 눌러 짜면서 조직속의 세포를 분리하였다. 세척한 배양액은 4-5$m\ell$를 100mm 유리 petri dish에 넣고 39$^{\circ}C$, 5% $CO_2$, 95% 공기인 배양기에서 2시간이상 배양하였으며, 배양 후 냉장된 buffer A 용액으로 세척하여 유리 petri dish의 바닥에 부착된 macrophage만을 cell scraper로 분리하였다. 분리한 macrophage는 0.5-1 $\times$ $10^{6}$ cells/$m\ell$가 되게 조정하여, IL-I 을 0.001, 0.01, 0.1 또한 1 ng/$m\ell$를 첨가하여 농도에 따른 효과를 조사하였고, 각각 24, 48, 72, 96 또한 120시간을 배양하여 시간에 의한 효과도 실시하였다. 각 배치구에서 얻어진 배양액은 TGF-$\beta$를 조사하기 전까지 -2$0^{\circ}C$에 동결 보존하였다. TGF-$\beta$의 측정은 TGF-$\beta$ kit(promega, USA)를 이용하여 실시하였으며, 통계학적 분석은 Anova test를 Statview program을 이용하여 분석하였다. 시험의 결과 대조구에 비해 IL-I 첨가구는 2-3배의 TGF-$\beta$생산을 보였으며, 배양시간에 따른 생산은 시간이 지남에 따라 약간 상승하는 경향을 보였으나, 유의적인 차이를 보이지는 않았다. 또한 IL-I의 농도에 따른 생산의 변화는 IL-I의 농도에 따라 약간의 차이를 보였고 유의적인 차이는 인정되지 않았다. 임신 및 비임신의 경우 임신우의 비장 macrophage가 비임신보다는 약간 상승하는 거스로 나타났다. 이상의 결과로 볼 때 IL-I $\alpha$ 는$\beta$subunit 보다 TGF-$\beta$ 생산에 있어서 서로 다른 양상을 보일 것으로 추정되며, IL-I은 macrophage의 직접적인 영향을 주기보다는 황체세포를 매개로 한 자궁에 TGF-$\beta$의 생산을 유도하는 것으로 사료되며, 임신관련 cytokine에 대한 다양한 연구가 요구되고 있다.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.214-219
• /
• 1997

The mechanical seals, which are installed in rotating machines like pump and compressor, are generally used as sealing devices in the many fields of industries. The failure of mechanical seals such as leakage, crack, breakage, fast and severe wear, excessive torque, and squeaking results in big problems. To identify abnormal phenomena on mechanical seals and to propose the proper monitoring parameter for the failure of mechanical seals, sliding wear experiments were conducted. Acoustic emission, torque, and temperature were measured during experiments. Optical microstructure was observed for the wear processing after every 10 minute sliding at rotation speed of 1750 rpm and scanning electron microscopy was also observed. Except for the initial part of every experiment, the variation of acoustic emission was well coincided with torque variation during the experiments. This study concludes that acoustic emission and torque are proper monitoring parameters for the failure of mechanical seals. The intensity of acoustic emission signals is measured in root mean square voltage. Temperature of sealing face will be used as a parallel parameter for increasing the reliability of monitoring system.

• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.747-761
• /
• 2008

In order to experiment the acoustic remote classification of seabed sediment, we achieved ground-truth data(i.e. video and grab samples, etc.) and developed post-processing for automatic classification procedure on the basis of 300 kHz MultiBeam Echo Sounder(MBES) backscattering data, which was acquired using KONGBERG Simrad EM3000 at Sock-Cho Port, East Sea of South Korea. Sonar signal and its classification performance were identified with geo-referenced video imagery with the aid of GIS (Geographic Information System). The depth range of research site was from 5 m to 22.7 m, and the backscattering amplitude showed from -36dB to -15dB. The mean grain sizes of sediment from equi-distanced sampling site(50 m interval) varied from 2.86$(\phi)$ to 0.88(\phi). To acquire the main feature for the seabed classification from backscattering amplitude of MBES, we evaluated the correlation factors between the backscattering amplitude and properties of sediment samples. The performance of seabed remote classification proposed was evaluated with comparing the correlation of human expert segmentation to automatic algorithm results. The cross-model perception error ratio on automatic classification algorithm shows 8.95% at rocky bottoms, and 2.06% at the area representing low mean grain size.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.682-687
• /
• 1999

The destruction of tissues by volume increase at food freezing is accepted as one of the factor responsible for quality damage. For this reason, the internal pressure developed in meats were investigated with a pressure transducer during freezing, frozen storage and thawing. Increasement of 6.33% for volume and $942.17\;kg/cm^2$ for density at $-20^{\circ}C$ for beef were shown. In quick and slow freezing of beef, internal pressure reached to highest point after reached to the lowest point at initial of the zone of ice crystal formation. The internal pressure was approximately $8{\sim}10\;psig$ and pressure difference was about 1 psig, which was bigger in immersion freezing than that of still-air freezing. During frozen storage of pork, internal pressure of $1.84{\sim}2.32\;psig$ occurred repeatedly as a function of sample weight at material temperature difference of ${\pm}1^{\circ}C$. The internal pressure during thawing of pork was decreased slowly after rapid increase to the maximum for less than 5min at the beginning of thawing. Internal pressure value at thawing was higher than that at freezing in most cases. Internal pressure of beef with thermal equalized freezing was about $1{\sim}4\;psig$, which was lower than that of non-thermal equalized freezing. Also, freezing time was shortened to $10{\sim}20%$.