• Title/Summary/Keyword: 2성분계

Search Result 1,463, Processing Time 0.029 seconds

The Evaluation of Surface Scaling and Resistance of Concrete to Frost Deterioration with Freezing-Thawing Action by Salt Water (염화물이 함유된 동결수의 동결융해 작용에 따른 콘크리트의 내동해성과 표면열화 평가)

  • Kim, Gyu-Yong;Kim, Moo-Han;Cho, Bong-Suk;Lee, Seung-Hoon
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.11 no.6
    • /
    • pp.143-151
    • /
    • 2007
  • This study presents the experimental results of frost durability including resistance to freezing-thawing and surface scaling of concrete. Mixing design was proportioned with the various water-binder ratio between 0.37 and 0.47 and three different binder compositions corresponding to Type I cement without any supplementary cementitious materials(OPC), Type II cement with 50% blast-furnace slag replacement(BFS50), and ternary cement with Type III cement, 15% fly ash, and 35% slag replacement (BFS35%+FA15%). Test results showed that the mixing design with BFS50% and BFS35%+FA15% exhibited higher durability factor than that made with OPC only. Finally, the use of blend cement containing slag can be used effectively in terms of frost durability of the concrete exposed to severe condition under coastal environment like as flying salt, sea water spray, etc.

Probing Atomic Structure of Quarternary Aluminosilicate Glasses using Solid-state NMR (다성분계 현무암질 비정질 규산염의 원자 구조에 대한 고상핵자기 공명 분광분석연구)

  • Park, Sun-Young;Lee, Sung-Keun
    • Journal of the Mineralogical Society of Korea
    • /
    • v.22 no.4
    • /
    • pp.343-352
    • /
    • 2009
  • High-resolution Solid-state NMR provides element specific and quantitative information and also resolves, otherwise overlapping atomic configurations in multi-component non-crystalline silicates. Here we report the preliminary results on the effect of composition on the structure of CMAS (CaO-MgO-$Al_2O_3-SiO_2$) silicate glasses, as a model system for basaltic magmas, using the high-resolution 1D and 2D solid-state NMR. The $^{27}Al$ MAS NMR spectra for the CMAS silicate glasses show that four-coordinated Al is predominant, demonstrating that $Al^{3+}$ is network forming cation. The peak position moves toward lower frequency about 4.7 ppm with increasing $X_{MgO}$ due to an increase in $Q^4$(4Si) fraction with increasing Si content, indicating that Al are surrounded only by bridging oxygen. $^{17}O$ MAS NMR spectra for $CaAl_2SiO_6$ and $CaMgSi_2O_6$ glasses qualitatively suggest that NBO fraction in the former is smaller than that in $CaMgSi_2O_6$ glasses. As $^{17}O$ 3QMAS NMR spectrum of model quaternary aluminosilicate glass resolved distinct bridging and non-bridging oxygen environments, atomic structure for natural magmas can also be potentially probed using high-resolution 3QMAS NMR.

횡하전기㈜ - 특허관리는 기술개발부문 특허부에서

  • 한국발명진흥회
    • 발명특허
    • /
    • v.14 no.1 s.155
    • /
    • pp.26-27
    • /
    • 1989
  • 일본 횡하전기㈜는 각종 공업계기$\cdot$계측기$\cdot$정보기기$\cdot$분석계$\cdot$성분계 등 항공기기의 제조 및 판매 업체로서 자본금 137억7천8백만엔에 종업원 6천3백명의 대기업. 특허부문은 기술개발부문산하 특허부이다. 특허부원은 30명으로 특허부장 산하에 기술 1$\cdot$2팀 18명, 정보팀 4명, 사무팀 7명 등이 있다. 또 기술팀은 주로 연구개발담당팀과 사무부 기술담당팀으로 구성되어 있다.

  • PDF

횡하전기㈜ - 특허부는 기술개발부문 산하

  • 한국발명진흥회
    • 발명특허
    • /
    • v.14 no.6 s.160
    • /
    • pp.72-73
    • /
    • 1989
  • 일본 횡하전기㈜는 각종 공업계기$\cdot$계측기$\cdot$정보기기$\cdot$분석계$\cdot$성분계 및 항공기기의 제조 및 판매 업체로서 자본금 137억 7천8백엔에 종업원 6천3백명의 대기업, 특허부문은 기술개발부문 산하특허부이다. 특허부원은 30명으로 특허부장 산하에 기술 1.2팀 18명, 정보팀 4명, 사무팀 7명 등이 있다. 또 기술팀은 주로 연구개발담당 팀과 사무부 기술담당 팀으로 구성되어 있다.

  • PDF

Effects of Constraint Release and Tube Renewal on the Binary Blends of Entangled Linear Polymers (엉켜 있는 2성분 선형 고분자의 제약완화 및 관 재형성 효과)

  • 김광만
    • The Korean Journal of Rheology
    • /
    • v.3 no.2
    • /
    • pp.166-174
    • /
    • 1991
  • 동일화학종이면서 \ulcorner량이 다른 두 단분산 고분자를 혼합한 2성분 다분산 농축계에 equivalent primitive chain model을 적용하여 사슬주위의 제약완화에 따른 관의 재형성 효 과를 각 사슬의 특성완화시간으로 산정하여 나타내었다. Polystyrene 시료에 대하여 동력하 적 실험을 실시한 결과를 이용하여 사동모델에 따른 각 사슬의 최장완화시간은 복소수 점도 의 허수분분(η")대 주파수($\omega$)의 관계, 관의 재형성 시간은 $\omega$ 변화에 따른 storage modulus(G') 로부터 각각 도출하였다. 이러한 작업을 통하여 특성완화 시간들이 분자량 및 각 성분 농도에의 의존성을 더욱 상세히 파악할 수 있었다.

  • PDF

Purification of Naphthalene from Naphthalene and 2-methylnaphthalene System by Layer MelMelt-Crystallization (경막형 용융결정화에 의한 나프탈렌과 2-메틸나프탈렌 혼합물로부터 나프탈렌의 분리)

  • Koh, Joo-Young;Kim, Chul-Uog;Park, So-Jin
    • Clean Technology
    • /
    • v.12 no.3
    • /
    • pp.157-164
    • /
    • 2006
  • In order to purify 2-methylnaphthalene as main impurity included in naphthalene, SLE (solid-liquid equilibria) on two components system including naphthalene and 2-methylnaphthalene were measured and a layered melt crystallization has been studied. SLE in the present system is shown a simple eutectic mixture and the experimental results using DSC method is similar to the static method. Purity and yield of naphthalene in crystal depended mainly on the cooling rate: Increasing cooling rate, the purity of naphthalene in crystal increase, whereas the yield of that decrease. The effective distribution coefficient (Keff) as the degree of impurity removal was observed to decrease with decreasing of cooling rate. Therefore, the purity of naphthalene by melt crystallization can be enhanced to 5~7 %.

  • PDF

Effects of Shielding Gas Composition on the Properties of Ferritic Stainless Steel GTA weld (페라이트계 스테인리스강 용접부 특성에 미치는 보호가스 조성의 영향)

  • Lee, Won-Bae;Ryu, Han-Jin;Kim, Ho-Soo
    • Proceedings of the KWS Conference
    • /
    • 2010.05a
    • /
    • pp.20-20
    • /
    • 2010
  • GTA (Gas Tungsten Arc)용접은 불활성 분위기에서 용접이 이루어지기 때문에 타 아크용접법에 비해 용접부 품질이 우수하여 고품질이 요구되는 산업분야에 널리 이용되고 있다. 하지만 스테인리스강으로 pipe를 제조하기 위해 GTA 용접을 적용할 경우, Laser 및 고주파 용접 (HFIW)에 비해 용접부 품질 및 용접속도가 낮기 때문에 pipe를 제조하는 산업에서 적용에 제한을 받고 있다. 하지만, GTA는 laser 혹은 HFIW에 비해 가격이 1/10수준으로 낮고, 용접부 gap tolerance 및 용접면 관리범위가 넓은 장점이 있기 때문에 GTA의 용접속도 및 용접품질을 향상시키기 위한 연구가 꾸준히 진행되고 있다. 일반적으로 스테인리스강 GTA용접 시 용접속도를 향상시키기 위해, 모재의 성분 제어 (합금성분 최적화-Al, S, Se, O등), Flux 도포 기술 (산화물을 용접전에 도포하여 용접속도 향상) 및 혼합보호가스 적용 등이 있다. 스테인리스강 용접 시 보호가스로는 용접부 품질을 확보하기 위해 Ar을 주로 사용하고 있다. 하지만 용입 특성을 향상시키기 위해 아크의 온도를 높일 수 있는 He, 혹은 $H_2$ gas를 단독 혹은 혼합하여 사용하고 있다. 오스테나이트계 스테인리스의 경우 용입특성을 향상시키기 위해 Ar에 $H_2$를 2~10%정도 혼합하여 사용하고 있다. 페라이트계 스테인리스강은 수소에 대한 고용도가 상대적으로 작아 용접부 수소 취화를 일으킬 수 있기 때문에 적용에 제한을 받고 있어 그 대안으로 산소를 극히 소량을 혼합하여 용입성 향상에 대한 연구가 보고 되고 있다. 따라서 본 연구에서는 페라이트계 스테인리스강의 용입특성을 향상시킬 목적으로 Ar에 산소를 미량 첨가 (1%미만) 하여 용접전류 및 산소 함량에 따른 용입특성의 변화에 대해 연구하였다. 또한 기계적인 물성 및 부식특성을 평가하였고, 최종적으로 실용화 가능성을 파악하기 위해 용접전극의 수명 테스트를 실시하였다. 실시한 결과, 산소가 첨가량 증가 할수록 용입특성은 상승하였으며, 기계적인 물성 또한 산소를 첨가하지 않은 경우에 비해 거의 유사한 값을 얻을 수 있었다, 하지만 산소함량이 증가 할수록 전극의 수명은 감소하여 교체주기가 증가함을 알 수 있다. 본 연구를 통해 얻어진 기술을 상용화시키기에는 극복해야할 문제가 있지만, 소재 합금성분 설계 시 용접생산성 향상위한 산소성분 범위를 제시할 수 있으리라 판단된다.

  • PDF

A Study on the Basic Properties of Concrete and Characteristics of Blended Low Heat Cement (혼합형 저발열 시멘트의 특성과 콘크리트 기초 물성에 관한 연구)

  • 송용순;한정호;강석화;김상철
    • Magazine of the Korea Concrete Institute
    • /
    • v.10 no.5
    • /
    • pp.177-187
    • /
    • 1998
  • 최근 국내에서 해양 구조물, 장대 교량의 하부구조물, LNG저장탱크 등 매스콘크리트의 증가추세에 따라 구조물의 고내구성과 관련하여 시멘트의수화열에 의한 온도균열의 발생을 최소화 시킬 수 있는 3성분계 혼합형 저발열시멘트가 개발되어 실 구조물의 적용단계에 있으나, 저발열시멘트가 개발되어 실 구조물의 적용단계에 있으나 저발열시멘트의 특성에 대한 전반적인 연구보고가 국내에서는 미진한 실정이다. 따라서 본 연구에서는 3성분계 혼합형 저발열시멘트의 특성 및 코\ulcorner리트의기초물성을 1종 보통포틀랜트 시멘트, 5종 내황산염시멘트, 슬래그시멘트와 비교하였다. 글 결과 저발열 콘크리트의 찹축강도는 초기재령에서 강도발현률이 적은 반면 장기강도발현률은 상당히 큰 경향을 보였다. 또한 수화열은 1종시멘트를 사용한 콘크리트에 비하여 1/3~1/2정도로 매스콘크리트의 수화열을 대폭적으로 저감시킬 수 있을 뿐만 아니라 염소이온에 대한 저항성이 상대적으로 높게 나타나 거대 해양 구조물의 적용에 매우 유리한 시멘트로 판단되었다.