• Fire Science and Engineering
• /
• v.25 no.1
• /
• pp.57-62
• /
• 2011

The flash point is one of the most significant combustion properties of flammable liquids in industrial processes when evaluation process safety, In this paper, Cleveland open cup tester is used to measure the flash points for the two binary systems (n-propanol + formic acid and acetic acid + propionic acid). The measured flash points were compared with the values calculated by the Raoult's law and the optimization method using van Laar and Wilson equations. The calculated values based on the optimization method were found to be better than those based on the Raoult's law.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.68-74
• /
• 1993

In order to maximize the utility of vacuum residue, supercritical solvent extraction technique where n-pentane was used as a supercritical solvent was applied to obtain deasphalted oil from vacuum residue. Oil-extraction yield at various temperatures and pressures and the contents of metal complex and sulfur of extracted oil were investigated. In supercritical state, extraction yield of deasphalted oil was found to be strongly dependent on the n-pentane density, and the metal complex content of extracted oil was effectively lowered when compared with that of vacuum residue. However, the sulfur content of extracted oil showed little difference when compared with that of vacuum residue.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.493-494
• /
• 2013

본 논문은 그리드 전원에 이상 발생 시 새그 / 피크를 빠르게 검출하는 시스템을 제안한다. 기존의 새그전압 검출기법은 DPLL의 동기좌표변환을 이용한 방법을 사용한다. 동기좌표변환은 일반적으로 3상 좌표계에서 사용되는 방법인데 현 시스템은 단상을 이용하는 시스템으로서 고정좌표계 변환을 하는데 q축이 존재하지 않아서 이를 실현시키기 위해 그리드 전압을 이용하여 $90^{\circ}$ 지연이 되는 q축을 만들어 주는 All-Pass Filter의 방법을 이용한다. 그러나 이 방법은 그리드 전압 상에 Power-Quality를 떨어뜨리는 변수인 새그나 정전 등의 문제가 발생하게 되면 일정의 특정 구간에서 새그 변동을 즉시 인지하지 못하는 현상이 발생하게 된다. 이러한 지연현상으로 인해 시스템에 새그가 발생한 시그널이 늦게 전달하는 현상이 발생하게 된다. 그래서 그리드 전압을 고정좌표계의 성분을 이용하여 현재 / 이전 값 연산을 한 2차 성분을 통한 새그 / 피크 검출방법을 제안한다. 기존의 방법과 제안하는 방법의 시뮬레이션과 실험결과를 비교하여 타당성을 입증하였다.

• Journal of the Korean Institute of Gas
• /
• v.23 no.2
• /
• pp.68-73
• /
• 2019

We proposed a method to convert the CO2 emission data of vehicles collected from the chassis dynamometer test from distance unit to energy unit which generally measured from the engine dynamometer tests. In the future, if engine dynamometer tests are limited, it is expected to be applied as an alternative method to calculate CO2 emission based on energy unit through the chassis dynamometer test. At this moment, engine efficiency is required and the test mode average efficiency should be used to improve the accuracy, not the result derived from specific speed and load conditions. Also, this method was applied to foreign data and the results were within 0.2%. However, CO, NOx and THC which have very low emission characteristics except CO2, are limited by the method proposed in this study and need to be considered separatively.

• Journal of Energy Engineering
• /
• v.2 no.3
• /
• pp.308-314
• /
• 1993

Both Vapor-liquid equilibrium data and boiling temperature have been measured for ternary and each corresponding binaries of n.dodecane-1.decanol-1.dodecanol mixture under constant pressure of 15 mbar. Measured vapor-liquid equilibrium data were correlated with the conventional g$\^$E/ model ; Margules, van Laar, Wilson, NRTL and UNIQUAC equations. Binary equilibrium data were thermodynamically tested by Redlich-Kister integral method and ternary data were also qualitatively checked by two point consistency test, suggested by McDermott-Ellis. Among the binary VLE data, only the system n.dodecane-1.decanol has minimum boiling azeotrope.

• Fire Science and Engineering
• /
• v.26 no.5
• /
• pp.48-53
• /
• 2012

The autoignition temperature (AIT) is important index for the safe handling of flammable liquids which constitute the solvent mixtures. This study measured the AITs and ignition delay time for n-Butanol+sec-Butanol system by using ASTM E659 apparatus. The AITs of n-Butanol and sec-Butanol which constituted binary system were $340^{\circ}C$ and $447^{\circ}C$, respectively. The experimental AITs of n-Butanol+sec-Butanol system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D. (average absolute deviation).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.42.2-42.2
• /
• 2009

인체의 치아 및 뼈는 무기질 성분과 단백질로 구성되어 있다. 생체세라믹스의 일종인 수산화아파타이트(Hydroxyapatite, HA; $Ca_{10}(PO_4)_6(OH)_2$)는 결정학적, 화학적으로뼈의 무기질 성분과 거의 유사하여 실제 체내에 들어가면 주위 뼈와 화학적 반응을 하여 단단한 결합을 이루는 생체활성(bioactive)을 가진 것으로 알려져 있다. 또한, 인산삼칼슘(Tri-Calcium Phosphate, TCP; $Ca_3(PO_4)_2$)은 체내에 이식 시 체액에 용해되어 신생골을 유도하는 생체흡수성(bioresorbable) 세라믹스로 알려져 있다. 상기 2종류를 포함한 인산칼슘계 화합물은 우수한 생체친화성에도 불구하고 역학 특성이 낮아, 하중을 거의 받지 않는 분야에만 사용되고 있는 실정이며, 하중을받는 분야(load-bearing part)에 적용하기 위해서는 고강도/고인성의 세라믹스와의 micro-composite이나 인산칼슘계화합물을 금속 표면에 코팅한 macro-composite의 형태로 사용되고 있다. 하중을 거의 받지 않는 분야, 예를 들어 치아 결손부를 보충할 dental shot과 같은 인산칼슘계 다공질 골충전재의 경우에도 취급 시 잘게 파손되는 문제점이 있어 치과의사들이 어려움을 호소하고 있는 실정이다. 본 연구에서는 HA, TCP의 역학특성을 증진시키고자 소결 공정 제어를 통하여 미세조직을 변화시켰으며, 미세조직 변화에 따른 세포반응성을 골포세포주를 이용하여 평가하였다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.132.2-132
• /
• 2003

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.155-165
• /
• 2016

Understanding the effect of boron content on atomic structures of boron-bearing multicomponent silicate melts is essential to reveal the atomistic origins of diverse geochemical processes involving silica-rich magmas, such as explosive volcanic eruption. The detailed atomic environments around B and Al in boron-bearing complex aluminosilicate glasses yield atomistic insights into reactivity of nuclear waste glasses in contact with aqueous solutions. We report experimental results on the effect of boron content on the atomic structures of sodium borate glasses and boron-bearing multicomponent silicate melts [malinkoite ($NaBSiO_4$)-nepheline ($NaAlSiO_4$) pseudo-binary glasses] using the high-resolution solid-state NMR ($^{11}B$ and $^{27}Al$). The $^{11}B$ MAS NMR spectra of sodium borate glasses show that three-coodrinated boron ($^{[3]}B$) increases with increasing $B_2O_3$ content. While the spectra imply that the fraction of non-ring species decreases with decreasing boron content, peak position of the species is expected to vary with Na content. Therefore, the quantitative estimation of the fractions of the ring/non-ring species remains to be explored. The $^{11}B$ MAS NMR spectra of the glasses in the malinkoite-nepheline join show that four-coordinated boron ($^{[4]}B$) increases as $X_{Ma}$ [$=NaBSiO_4/(NaBSiO_4+NaAlSiO_4)$] increases while $^{[3]}B$ decreases. $^{27}Al$ MAS NMR spectra of the multicomponent glasses confirm that four-coordinated aluminum ($^{[4]}Al$) is dominant. It is also observed that a drastic decrease in the peak widths (full-width at half-maximum, FWHM) of $^{[4]}Al$ with an addition of boron ($X_{Ma}=0.25$) in nepheline glasses. This indicates a decrease in structural and topological disorder around $^{[4]}Al$ in the glasses with increasing boron content. The quantitative atomic environments around boron of both binary and multicomponent glasses were estimated from the simulation results of $^{11}B$ MAS NMR spectra, revealing complex-nonlinear variation of boron topology with varying composition. The current results can be potentially used to account for the structural origins of the change in macroscopic properties of boron-bearing oxide melts with varying boron content.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.415-415
• /
• 2012

ICP (RF) 열 플라즈마 분말 합성법은 초고온 열플라즈마(~10,000 K) 속으로 원료물질을 투입한 뒤, 용융, 기화 및 재합성의 과정을 거쳐 초미분(<1 ${\mu}s$)을 합성하는 방법으로 고출력 시스템의 경우 고온/고 엔탈피 열 유동을 통한 고융점 및 저융점 복합물질의 동시 기화에 의한 물질 조성이 제어된 나노 복합체의 대량 합성이 가능할 것으로 기대되고 있다. 본 연구에서는 전북대학교 고온플라즈마 응용연구센터의 60&200 kW의 고출력 ICP (RF) 열 플라즈마 시스템을 이용하여 LTO (Lithium Titanium Oxide)와 IZTO (Indium Zinc Tin Oxide), Barium Borosilicate Glass (K2O-BaO-B2O3-SiO2)의 다성분계 나노 복합체를 합성하였으며, FE-SEM, TEM, XRD, ICP-OES를 이용하여 그 특성을 분석하였다.