• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.6-17
• /
• 1997

Lithium niobate single crystals with various [Li]/[Nb] ratios were grown by the Czochralski method from melts having compositions varing between 48.6 ~ 58.0 mol % $Li_2O$. A vapor transport equilibration technique has been used to improve the homogeneity and adjust the [Li]/[Nb] ratio in small $LiNbO_3$ single crystals grown by the Czochralski method. When equilibrated with a Li-rich powder (65 mol%$Li_2O$), containing a mixture of $LiNbO_3$ and $Li_3NbO_4$, crystals of nearly stoichiometric composition can be obtained. This was established by studying the composition dependence of the following properties; lineshape, intensity and linewidth for the electron paramagnetic resonance (EPR) of $Fe^{3+}$ energy of the fundamental absorption edge and $OH^-$ absorption spectra.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.456-464
• /
• 2022

Hydrogen permeation performance was analyzed by manufacturing Pd and Pd-Cu membranes through electroless plating. As a support for the Pd and Pd-Cu membranes, α-Al₂O₃ ceramic hollow fiber were used. Pd-Cu membrane was manufactured through sequential electroless plating, and then annealing was performed at 500°C, for 18 h in a hydrogen atmosphere to make Pd and Cu alloy. After annealing, the Pd-Cu membrane confirmed that the alloy was formed through EDS (Energy Dispersive X-ray Spectroscopy) and XRD (X-ray Diffraction) analysis. In addition, the thickness of the Pd and Pd-Cu plating layers were measured to be about 3.21 and 3.72 µm, respectively, through SEM (Scanning Electron Microscope) analysis. Hydrogen permeation performance was tested for hydrogen permeation in the range of 350~450°C and 1~4 bar in hydrogen single gas and mixed gas (H₂, N₂). In a single hydrogen gas, Pd and Pd-Cu membranes have flux of up to 54.42 and 67.17 ml/cm²⋅ min at 450 °C and 4 bar. In the mixed gas, it was confirmed that the separation factors of 1308 and 453 were obtained under the conditions of 450 °C and 4 bar.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.375-381
• /
• 1994

A bacterial strain No. KY-126, which produced extracellular cyclodextrin glycosyltransferase(CGTase), was isolated from soil and identified as Bacillus stearothermophilus KY-126. The enzyme was purified by the treatments of ammonium sulfate precipitation, DEAF-Sephadex, Sephadex G-100 column chromatography. The optimal pH and temperature for the enzyme activity were pH 5.5 and $65^{\circ}C$, respectively. And the enzyme was stable at pH values from 6.0 to 11.0 at $55^{\circ}C$ for 30 min and stable up to $60^{\circ}C$ for 30 min.. The enzyme was inhibited by $HgCl_{2}$. The molecular weight of the enzyme was estimated to be 67,000 by using SDS-PAGE. The maximum conversion from starch to cyclodextrin (CD) by CGTase was 43% and obtained at 6 hr reaction and the ratio of ${\alpha}-,\;{\beta}-,\;{\gamma}-$, CD production at this time was 2.9 : 2.1 : 1.0.

• Composites Research
• /
• v.32 no.6
• /
• pp.355-359
• /
• 2019

The high efficient water splitting system should involve the reduction of high overpotential value, which was enhanced by the electrocatalytic reaction efficiency of catalysts, during the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) reaction, respectively. Among them, transition metal-based compounds (oxides, sulfides, phosphides, and nitrides) are attracting attention as catalyst materials to replace noble metals that are currently commercially available. Herein, we synthesized optimal monodisperse Co₃[Co(CN)₆]₂ PBAs by FESEM, and confirmed crystallinity by XRD and FT-IR, and thermal behavior of PBAs via TG-DTA. Also, we synthesized monodispersed Co₃O₄ nanocubes by calcination of Co₃[Co(CN)₆]₂ PBAs, confirmed the crystallinity by XRD, and proceeded OER measurement. Finally, the synthesized Co₃O₄ nanocubes showed a low overpotential of 312 mV at a current density of 10 mA·cm^-2 with a low Tafel plot (96.6 mV·dec^-1).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.3
• /
• pp.96-102
• /
• 2022

Hydroxyapatite (HAp) was synthesized from calcium hydroxide (Ca(OH)₂) reacting with phosphoric acid (H₃PO₄) in aqueous solution. HAp powders were synthesized from extremely high concentration of precursor solutions over 3 M of Ca(OH)₂ aqueous suspension using modified process parameters such as phosphoric acid (H₃PO₄) pouring rate, aging time and post ball milling process. Regardless of phosphoric acid pouring rate, the DCPD (dicalcium phosphate dihydrate) was formed at room temperature and when heated above 700℃, β-TCP (tricalcium phosphate) was synthesized and the amount reached its maximum at 900℃. When the synthesized powder was sintered at 1150℃, β-TCP, a high temperature impurity phase, remained. The single HAp phase without DCPD was obtained from post ball-milled precipitates followed by 3 day aging. For the ball-milled precipitates even without the aging process, the desired single HAp phase without β-TCP could be obtained by heat treatment above 500℃. The post ball milling process provided a convenient route for HAp synthesis.

• Food Science and Preservation
• /
• v.9 no.4
• /
• pp.434-440
• /
• 2002

The growth characteristics of 5. coli O157:H7 CDFI, A. sobria CDF3 and S. aureus CDF2 isolated from surface of carcass were investigated to improve hygienic quality of beef. The total count of carcass surface before washing was higher than that of after washing. Total count of after cooling decreased about 10$^1$∼ 10$^2$/㎠ compare with before cooling. Total count of carcass surface after transfer increased regardless seasons. The growth E. coli O157:H7 CDF1 occurred at pH 4 and 6% NaCl but A. sobria CDF3 and S. aureus CDF2 did not grow at the same conditions. Although the growth of E. coli O157:H7 CDF1 and S. aureus CDF2 was inhibited by 0.3％ lactic acid, but A sobria CDF3 did not grow in TSB containing 0.3％ lactic acid. E. coli O157:H7 CDF1 grew rapidly after 3 days incubation at 10$\^{C}$ but did not grow at 4$\^{C}$. But A. sobria CDF3 grew rapidly after 3 days incubation at 4$\^{C}$. E. coli O157:H7 CDF1 and A. sobria CDF3 were destroyed by heat treatment for 3 min at 60$\^{C}$. S. aureus CDF2 did not detect after heat treatment for 2 min at 70$\^{C}$.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.616-620
• /
• 1998

Zn_{0.994}Mn_{0.006}Ga_2O_4$ green phosphor powders were synthesized using polymerized complex and solution combustion methods, and their powder and luminescence properties were characterized by XRD, SEM, BET, PL, etc. The properties were compared with those of the powders prepared by a solid state reaction method. The powders prepared by polymerized complex and solution combustion methods showed only a single spinel phase at 50$0^{\circ}C$ and 40$0^{\circ}C$, respectively. Their particle sizes were smaller than that of a solid state reaction method. Emission intensity of the phosphor powders prepared by both methods were highest at 90$0^{\circ}C$ and 40$0^{\circ}C$, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.93.2-93.2
• /
• 2018

최근 기후 변화 문제로 $CO_2$배출량 억제 정책에 따라 열전재료가 다양한 분야에 크게 주목 받고 있다. 열전 모듈은 전류를 흘려 온도차를 발생시키는 펠티어 효과와 온도차를 전력으로 변환하는 제백 효과를 이용한다. 열전발전용에 적용되는 상용 열전모듈의 경우, 열전소자의 접합부의 수는 수십 개 이상이다. 따라서 단 한 개의 접합 불량 열전소자가 모듈 전체의 열전성능에 큰 영향을 미친다. 현재 상용화 된 Bi-Te계 열전 모듈은 Bi-Te의 Te와 Sn계 솔더의 주성분인 Sn이 $250^{\circ}C$ 부근에서 취성의 Sn-Te계 금속 화합물을 형성한다고 알려져 있다. 이 때 생성된 Sn-Te 화합물은 열전모듈의 접합강도를 약화시키고 이로 인해 열전모듈의 접합 신뢰성을 크게 저하 시킬 수 있다. 이를 해결하기 위해 솔더와 소자 사이에 확산방지층이 적용되고 있으며, 이 중에서 니켈합금이 가장 널리 적용되고 있다. 니켈층을 형성시키는 방법 중에서, 무전해 도금법은 간단하게 열전소자 표면 위에 도금 층을 균일한 두께로 만들어 낼 수 있다. 하지만, 니켈 도금층과 Bi-Te 소자 간에 화학적 결함이 존재하지 않기 때문에, 무전해 니켈 도금층의 밀착성이 떨어진다. 이 때. 소자 표면에 거칠기 효과(anchor effect)를 부여하기 위해 물리적 샌딩법을 사용하는데 이 방법의 경우 소자에 크랙 같은 손상을 미쳐 열전모듈의 신뢰성 저하를 가져온다. 그러므로 거칠기 효과를 부여하면서 소자에 손상을 최소화하는 습식 식각법을 개발하여 Bi-Te계 열전소자의 표면 조도를 조절하고 무전해 Ni-P 도금을 실시하였다. 그리고 열처리 유무에 따른 열전모듈의 접합강도를 측정하였으며, 제작한 열전 모듈의 접합부 및 파단부의 계면 분석하여 무전해 Ni-P도금을 위한 습식식각법(wet etching법)에 대하여 검토하였다. N-type은 질산과 구연산의 혼합수용액에, P-type은 왕수에 습식 식각처리를 해서 적당히 표면 조도를 조절한 후에 EPMA로 분석을 해본 결과 니켈 도금층과 Bi-Te 소자 간에 anchor effect가 부여 된 것을 확인했다. 습식 식각에 의해서 제조된 열전모듈의 접합강도는 종래의 알루미나 샌딩법으로 제조한 열전모듈 보다 높은 접합강도를 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.338-338
• /
• 2012

사파이어 ($Al_2O_3$)는 높은 밴드갭 에너지 (~19.5 eV)를 가진 물질로서 우수한 내마모성, 강도, 전기 절연성 및 안정한 화학적 특성을 갖고 발광다이오드 기판, 보석재료 등 각종 산업 및 기술적 분야에서 널리 사용되고 있다. 특히, 플립칩 발광다이오드 구조의 경우 광추출효율을 향상시키기 위해 높은 투과도를 갖는 사파이어 기판이 요구되어 왔으며, 지금까지 건식/습식식각방법을 이용한 사파이어 표면에 마이크로 크기의 심한 거칠기 또는 요철이 형성된 나노크기의 격자구조를 형성시키는 연구가 진행되어 오고 있다. 그 중, 나노 크기의 격자구조는 공기에서 반도체 기판까지 선형적인 유효굴절률 분포를 갖기 때문에 표면에서 생기는 Fresnel 반사 손실을 줄일 수 있다. 이러한 구조를 형성하기 위해서는 식각 마스크가 필요한데, 형성 방법으로 레이저 간섭 리소그래피, 전자빔 리소그래피, 나노임프린트 리소그래피 등이 있으나, 비싼 가격과 복잡한 공정 절차 등의 단점을 지니고 있다. 따라서 본 연구에서는 식각 마스크 패턴을 위해, 보다 저렴하고 간단한 실리카 나노구 및 열적응집 금 나노 입자를 이용하였다. 양면 폴리싱 c-plane 사파이어 기판을 사용하였고, 단일 층의 주기적인 실리카 나노구를 기판 표면에 스핀코팅에 의해 도포한 후 유도결합플라즈마 식각 장비를 이용하여 식각하여 주기적인 패턴을 갖는 렌즈모양의 격자구조를 형성하였다. 그리고 주기적으로 형성된 격자 위에 열 증착기를 이용하여 금 박막을 증착한 후 급속열적어닐닝(rapid thermal annealing)을 이용하여 열처리함으로써 비주기적인 금 나노입자를 형성시켰다. 형성된 금 나노패턴을 이용하여 동일한 조건으로 식각함으로써 광대역 및 전방향성 높은 투과도를 갖는 원뿔 모양의 사파이어 나노구조를 제작하였다. 제작된 샘플의 패턴 및 식각 형상은 전자현미경을 사용하여 관찰하였으며, UV-vis-NIR 분광광도계 (spectrophotometer)를 사용하여 투과율을 측정하였다. 렌즈 모양 표면 위에 원뿔모양의 나노구조를 갖는 사파이어 기판은 일반적인 사파이어 기판보다 향상된 투과율 특성을 보였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.4
• /
• pp.184-189
• /
• 2002

The electrical and optical properties of $(Pb_{0.91}La_{0.09})(Zr_{0.65}Ti_{0.35})O_3$(PLZT) thin films by MOCVD using ultrasonic spraying were investigated. To compensate the Pb loss by evaporation, 5 and 10 wt% of excess Pb was added to 0.2 M precursor. After deposition of films on ITO-coated glasses in oxygen atmosphere for 30 min, films were heated by in-situ RTA (rapid thermal annealing) method. When the films were heat treated at $600^{\circ}C$, perovskite single phase was obtained. The optical property of the film with 10 wt% excess Pb was excellent showing about 84 % of transmittance near 520 nm. The dielectric constant of the film was about 308 and the leakage current of the film was lower than the Pb excess 0, 5 wt% PLZT thin films.