• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.529-533
• /
• 2012

본 연구에서는 실내실험을 통하여, 하안침식을 고려한 망상하천에서 저수로의 이동특성을 조사하며, 2중 퓨리에 해석에 의하여 사주의 거동특성을 분석하였다. 실내실험은 평균입경이 1.4 mm이고, 표준편차가 1.35인 균일사로 10 cm 의 두께로 전체가 균등하게 채워진, 길이가 12 m, 넓이 2 m 수로에서 수행하였다. 각 시간별 하도의 지형변화에 대하여 2 중 Fourier 해석에 의한 지배적인 성분, 즉 모드(mode)의 변화를 분석하였다. 여기서 1-1 mode는 교호사주(alternate bars)이고, 1-2 mode와 2-2 mode는 2차 횡방향 모드로서 중앙 사주(central bars)를 나타낸다. 1-3 mode와 2-3 mode는 한 단면에서 횡방향으로 3개의 사주가 형성된 것(triple row bars)를 나타낸다. 초기에는 1-1 mode인 교호사주가 지배적이지만, 시간이 증가함에 따라, 교호사주인 1-1 mode는 감소하고, 한 단면에서 3개의 사주가 형성되는 2-3 mode가 지배적인 것으로 나타났다. 이러한 원인은 시간이 지나면서 사주가 발달하고, 하안침식이 되면서, 하폭이 증가하여 상대적으로 수심이 감소하면서 복렬사주가 발달하기 때문이며, Colombini 등(1987)이 이론적으로 예측한 결과와 잘 일치한다. 한 단면에서 3개의 모드가 나타나는 것은 하상에서 변화를 일으키는데 중요한 역할을 한다. 직선하도에서 사주의 수가 증가하는 것은 교호사주의 강한 비선형으로 상호작용하기 때문이다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.450-467
• /
• 1998

The characteristics of the unstable impinging circular jet is investigated based on the frequency characteristics and the sound field of the impinging-tones. Two symmetric modes S1 and S2, associated with low frequency and high frequency respectively, and one helical mode H have been observed. At low speed the S2 mode is dominant and switched by the S1 mode as the speed increases. When the jet speed is high the S1 mode is very active over the impinging distance from half the nozzle diameter to its ten times, while the S2 mode occurs at shorter distance corresponding to stage 2 and 3. The helical mode H seems unstable, likely to be influenced much by the experimental environment, and occurs at relatively high speed with almost the same frequency characteristics as the S2 mode. By estimating the convection speed of the unstable jet, it is found that the ratio of the convection speed to the jet speed decreases with both Strouhal number and Reynolds number and the speed of S2 mode is faster than the Si mode. When the present experimental results are compared with the previous investigations performed for the hole tone and the impinging tone with a small plate, the S1 mode is found to be associated with the ring vortex of large diameter with low speed, but the S2 mode with the vortex of small diameter with high speed. In addition, the frequency is found to be influenced by the nozzle configuration but the characteristics is almost the same. From the impinging distance and frequency range, it can be deduced that S1 mode is related with the jet column mode and S2 mode with the shear mode.

• STI Policy Review
• /
• v.8 no.2
• /
• pp.23-48
• /
• 2017

This article advocates for a Mode 3 science policy. Compared to the university research-based Mode 1 knowledge production system and the knowledge application-centric Mode 2 innovation system, Mode 3 can be defined as a system that integrates both Mode 1 and Mode 2-type knowledge production models. In this article, based on the major characteristics of the Mode 3 scientific knowledge production system, I agree with the advocates of Mode 3 that constructing a knowledge society requires an inclusive form of knowledge production and innovation system through the democratization of knowledge production as well as the promotion of social values. Moreover, the mechanisms for creating accountable innovation in the Mode 3 system should be given more attention from the science research and policy communities to make public policy for scientific and technological innovation more reflective of social changes. Similar to the ways that the Mode 1 and Mode 2 scientific knowledge production approaches have influenced the development of science policy models, the Mode 3 scientific knowledge production approach, or Mode 3 science, also has the potential to shape a new science policy model. I will refer to this as Mode 3 science policy. In an effort to conceptualize the democracy- and society-centric Mode 3 science policy model, I will articulate science policy strategies in four science policy domains in South Korea from the context of the Mode 3 science approach. These include (1) evaluation of publicly-funded research activities, (2) valorization of scientific knowledge (that is, enhancement of the value of scientific knowledge through governmental action), (3) development of a science policy decision-making support system, and (4) anticipatory foresight of science, technology and society. When adopting and implementing a Mode 3 science framework, one progressive change is to increase socially desirable innovation such as responsible innovation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1337-1342
• /
• 2012

In this paper, we propose a novel reconfigurable antenna that can change the electrical shape of the matching network using RF switches of PIN diodes. The designed antenna operates at two different modes that are Mode 1 (HSDPA band, 2.1~2.2 GHz) and Mode 2(WiBro WiFi band, 2.3~2.5 GHz). The antenna is built on both sides of a polyarcylate substrate. The measured reflection coefficient shows a matching bandwidth of 547 MHz($S_{11}$ <-3 dB, 2.035~2.582 GHz) for Mode 1 and 600 MHz($S_{11}$ <-3 dB, 2.2~2.8 GHz) for Mode 2, and it shows average vertical gains of -4.4 dBi and -4.5 dBi in x-y plane, respectively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.69-75
• /
• 2019

Remotely Piloted Aircraft (RPA) controls as a type of unmanned aerial vehicle (drone) is growing rapidly and its flight controller stick disposition is required standardization. We should standardize RPA drone flight control disposition because the flight pilot of RPA is hard to be trained so the flight controller stick differences impairs safety and wastes time and effort of flight controller industry. So this study researches the on-going standardization of RPA drone flight control disposition in Korea and foreign countries. Also this paper analyzes and researches of expert about RPA drone flight controller function and application of flight control mode. I accomplished expert research about standardization plan of unmanned flight control mode and confirm the necessity. Nowadays mode1 and 2 are mostly used in Korea so I carried out preference investigation for two modes. There were 4 preferences choices of RPA drone control mode necessity (importance) and recommendation of standardization modes. They answered that necessity of standardization is important considering pilot training, flight safety and positive development of drone industry. The result of standardization mode preference is that they prefer mode 2 (drone maker 86%, training facilities and research facilities 58%, government bureau 60%). Overall preference result shows that mode 1 24%, mode 1&2 16%, mode 2 60%. So they preferred mode 2 by 60%. The differences between two modes are the direction of throttle and pitch. Direction of throttle and pitch operate opposite way. They prefer mode 2 because mode 2 has similarities of manned flight control mode. Significance of this study is that it showed the necessity of standardization and flight control preference in a quantitative way. It will help drone standardization in related industries and development direction near future.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.749-753
• /
• 2008

Proprioception defined it as the ability to detect, the spatial position or movement of joints using balance, power of the muscle, agility in the internal parts of the body. In existing study for improvement of proprioception, reaching task training provided a feedback; the assessment was not provided a feedback. But, this has problem that it can not guide a proprioception from situation with visual feedback. Virtual reality technique can solve the problem of way providing feedback during training. In this study, we developed proprioception training program using virtual reality and pilot study is performed. VR task were composed three modes. In mode 1, real-time movement of the body was provided using visual feedback. In mode 2, body position was provided using visual feedback when participant have specific response. And in mode 3, body position was not provided. VR task is performed five sessions at each mode and one session performed one by one a three target. In the result of this study, the moving time toward the target from mode 3 was smaller than the moving time toward the target from mode 1 (p= 0.001). The correlation was statistically significant between mode 2 and mode 3 while be offering visual feedback position of mode 2 1session. But, the correlation was not statistically significant between mode 2 and mode 3 after be offered visual feedback position of mode2 1session (p = 0.012). Training environment of mode 1 shows which training used visual feedback than proprioception. Mode2 can execute training of proprioception because first session acquires visual feedback by proprioception. The next study will be verification of the system for training or assessment by clinical experiment.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.263-269
• /
• 2011

In the operation of submerged membrane-coupled sequencing batch reactor, the effect of filling step on the removal efficiency and filtration performance were investigated. Two sets of operation modes, the filling step located in the beginning of aerobic step (Mode-1) and the beginning of anoxic step (Mode-2), during 89 days were conducted. There was no wide difference in the COD removal and filtration performance between two sets of operation modes. But in the removal efficiency of nutrients (total nitrogen and total phosphorous), Mode-2 was more effective than Mode-1. In the case of Mode-2, average removal efficiencies of COD, total nitrogen, and total phosphorous were 99.1, 73.3, and 77.3%, respectively.

• Progress in Medical Physics
• /
• v.27 no.3
• /
• pp.169-174
• /
• 2016

The aim of this study is to investigate the delivery accuracy of intensity-modulated radiation therapy (IMRT) plans in the two-headed mode of the ViewRay$^{TM}$ system in comparison with that of the normal operation treatment plan of the machine. For this study, a total of eight IMRT plans and corresponding verification plans were generated (four head and neck, two liver, and two prostate IMRT plans). The delivered dose distributions were measured using ArcCHECK$^{TM}$ with the insertion of an ionization chamber. We measured the delivered dose distributions in three-headed mode (normal operation of the machine), two-headed mode with head 1 disabled, two-headed mode with head 2 disabled, and two-headed mode with head 3 disabled. Therefore, a total of four measurements were performed for each IMRT plan. The global gamma passing rates (3%/3 mm) in three-headed mode, head 1 disabled, head 2 disabled, and head 3 disabled were $99.9{\pm}0.1%$, $99.8{\pm}0.3%$, $99.6{\pm}0.7%$, and $99.7{\pm}0.4%$, respectively. The difference in the gamma passing rates of the three- and two-headed modes was insignificant. With 2%/2 mm, the rates were $96.6{\pm}3.6%$, $97.2{\pm}3.5%$, $95.7{\pm}6.2%$, and $95.5{\pm}4.3%$, respectively. Between three-headed mode and head 3 disabled, a statistically significant difference was observed with a p-value of 0.02; however, the difference was minimal (1.1%). The chamber readings showed differences of approximately 1% between three- and two-headed modes, which were minimal. Therefore, the treatment plan delivery in the two-headed mode of the ViewRay$^{TM}$ system seems accurate and robust.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.135-139
• /
• 2016

I propose a vector passive harmonic mode-locked fiber laser based on topological insulator Bi2Se3 interacting with a fiber taper with a diameter of 7 μm. The particles of topological insulator are deposited uniformly onto the fiber taper with light pressure effect. By incorporating the fabricated saturable absorber into an Er-doped fiber laser cavity, stable mode-locked fiber is obtained. Due to the intense evanescent field of the fiber taper, strong confinement of light enhances the nonlinearity of the laser cavity, and passive harmonic mode-locking is performed. I observe a maximum harmonic mode-locking of 356th, corresponding to a frequency of 3.57 GHz. The pulse duration is 824 fs, and the full width at half maximum of the spectrum is about 8.2 nm. The polarization dependent loss of the saturable absorber is ~ 2.5 dB in the wavelength range of the C band. As the cavity contains no other polarization dependent device, the mode-locked laser is functioning in the vector state. The harmonic order vs pump power is investigated. To the best of our knowledge, this report is the highest frequency mode-locked fiber laser based on Bi2Se3. Experimental results indicate that the topological insulator Bi2Se3 functioning with a thin fiber taper is effective for vector harmonic mode-locking.

• YAKHAK HOEJI
• /
• v.43 no.6
• /
• pp.776-781
• /
• 1999

Dockings of 4,5-diarylpyrroles into cyclooxygenase-1 and cyclooxygenase-2 were carried out by GOLD program. The sulfonyl groups bonded to 5-phenyl ring of 4,5-diarylpyrroles are directed to Arg513 of COX-2 and Tyr385 of COX-2 docking modes of pyrroles are different from COX-1. Tyr385 and Arg120 of COX-1 and COX-2 have been recognized as important residues. Val523 of COX-2 may be also important. A new COX-2 selective inhibitors could be designed from the docking study.