• Korean journal of applied entomology
• /
• v.47 no.3
• /
• pp.227-235
• /
• 2008

Development of T. urticae was studied on the leaves of eggplant grown in hydroponics with silica contents of 0 mM, 1.7 mM, and 5.1 mM. As the levels of sllica increased, those of N, P, K, Ca, and Mg decreased and those of Si increased. While contents of calory, crude protein, carbohydrates, and vitamin C decreased, those of ash, fiber, and sugar increased. Biomass and content of cholorophyll decreased as the level of silica increased while leaves became thicker. Laboratory leaf disc tests provided with various silica levels revealed that feeding preference of T. urticae was the highest at 0 mM and the lowest at 1.7 mM. The oviposition preference decreased as the levels of silica increased, on the lower leaf appeared to hinder the feeding and the oviposition of T. urticae. The development slowed down both in female and male. Adult life span of female shortend as the silica level increased and that of male was the longest as 5.7 days at 0mM and the shortest at 1.7 mM. Oviposition period also shortened as the silica content increased. The number of eggs laid was the most as 86.3 at 1.7 mM while average oviposition per day was the least as 77 at 0 mM. No differences in hatchability was detected whereas the ratio of sex was the highest as 0.71 in favor of female at 0mM. $R_o$ and T decreased as the levels of silica increased. Rm and $\lambda$ was the lowest at 5.1 mM while Dt was the longest as 1.8271 at 5.1 mM and the shortest as 1.6991 days at 1.7 mM. Silica content in eggplant turned to affect the development of T. urticae, however, it deterred T. urticae from feeding and oviposition and the rate of increase tended to decrease due to lesser nutrients in the eggplant leaf.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.315-322
• /
• 2013

Purpose: To evaluate the axial displacement of implant-abutment assembly after cyclic loading in internal tapered connection system. Materials and methods: External butt-joint connection implant and internal tapered connection implant were connected with three types of abutment for cement-retained prostheses, i.e. external type abutment (Ext group), internal tapered 1-piece abutment (Int-1 group), and internal tapered 2-piece abutment (Int-2 group). For each group, 7 implants and abutments were used. The implantabutments assemblies were clamped into the implant holder for vertical loads. A dynamic cyclic loading was applied for $150{\pm}10N$ at a frequency of 4 Hz. The amount of axial displacement of the abutment into the implant was calculated at each cycle of 0, 5, 10, 50, 100, 1,000, 5,000, and 10,000. A repeated measures analysis of variance (ANOVA) for the overall effect of cyclic loading and the pattern analysis by linear mixed model were used for statistical analysis. Differences at P<.05 were considered statistically significant. Results: The mean axial displacement after 10,000 cycles were $0.714{\pm}0.488{\mu}m$ in Ext group, $5.286{\pm}1.604{\mu}m$ in Int-1 group, and $11.429{\pm}1.902{\mu}m$ in Int-2 group. In the pattern analysis, Int-1 and Int-2 group showed continuous axial displacement at 10,000 cycles. There was no declining pattern of axial displacement in the Ext group. Conclusion: The pattern of linear mixed model in Ext group showed no axial displacement. There were continuous axial displacements in abutment-implant assemblies in the Int-1 and Int-2 group at 10,000 cycles. More axial displacement was found in Int-2 group than in Int-1 group.

• Journal of Life Science
• /
• v.19 no.5
• /
• pp.625-632
• /
• 2009

The purpose of this study was to examine the effect of exercise training on nitric oxide (NO) levels, mean arterial pressure (MAP), blood pressure (BP), and heart rate (HR) in college students. 5 subjects were randomly assigned to two experimental groups; an aerobic training group (ATG) and a resistance training group (RTG). In aerobic training, based on measured maximum oxygen consumption rate, 70% exercise intensity was applied and conducted for 60 min. In resistance training, 70% of 1-RM was performed for 90 min. Blood sampling was conducted 3 times during resting state, post-exercise, and after 30 minutes of recovery. The results are as followed. For the post training values of $VO_2max$, % body fat and MAP, there were significant differences in the ATG compared to pre training (p<0.05). However, there were no differences in the RTG between pre and post training. NO increased post training, during rest and at the end of exercise compared to pre training in the ATG (p<0.05). Also, the HR decreased in post training at the end of exercise (p<0.05), however, there were no significant differences in SBP and DBP between pre and post training in the ATG. The HR, SBP and DBP did not change at all in post training compared to pre training in the RTG. In conclusion, an increase in the production of Nitric Oxide (NO) concentration and $VO_2max$, decrease of body fat% and physiological variables (HR, BP, MAP) were shown to be more effective in aerobic training (AT) than resistance training (RT).

• Korean Journal of Applied Biomechanics
• /
• v.21 no.4
• /
• pp.437-447
• /
• 2011

In this study, the lower limbs joints were analyzed for features based on the biomechanical characteristics of landing techniques according to height and landing on the ground type (flats and downhill). In order to achieve the objectives of the study, changes were analyzed in detail contents such as the height and form of the first landing on the ground at different angles of joints, torso and legs, torso and legs of the difference in the range of angular motion of the joint, the maximum angular difference between joints, the lower limbs joints difference between the maximum moment and the difference between COM changes. The subjects in this study do not last six months did not experience joint injuries 10 males in 20 aged were tested. Experimental tools to analyze were the recording and video equipment. Samsung's SCH-650A model camera was used six units, and the 2 GRF-based AMTI were used BP400800 model. 6-unit-camera synchronized with LED (photo cell) and Line Lock system were used. the output from the camera and the ground reaction force based on the data to synchronize A/D Syc. box was used. To calculate the coordinates of three-dimensional space, $1m{\times}3m{\times}2m$ (X, Y, Z axis) to the size of the control points attached to the framework of 36 markers were used, and 29 where the body was taken by attaching a marker to the surface. Two kinds of land condition, 40cm and 60cm in height, and ground conditions in the form of two kinds of flat and downhill slopes ($10^{\circ}$) of the landing operation was performed and each subject's 3 mean two-way RM ANOVA in SPSS 18.0 was used and this time, all the significant level was set at a=.05. Consequently, analyzing the landing technique as land form and land on the ground, the changes of external environmental factors, and the lower limbs joints' function in the evaluation were significantly different from the slopes. Landing of the slop plane were more load on the joints than landing of plane. Especially, knee extensor moment compared to the two kinds of landing, slopes plane were approximately two times higher than flat plane, and it was statistical significance. Most of all not so much range of motion and angular velocity of the shock to reduce stress was important. In the further research, front landing as well as various direction of motion of kinetic, kinetic factors and EMG variables on lower limbs joints of the study in terms of injury-prevention-approach is going to be needed.

• KSBB Journal
• /
• v.25 no.4
• /
• pp.337-343
• /
• 2010

It has been well known that organic solvents like t-butanol and n-hexane can protect lipases from the inhibition by short-chain alcohols in the enzymatic transesterification. However, use of the organic solvents should be minimized considering their negative effects on environment and human health. Therefore, use of the greener solvents has been pursued in various are as including the enzymatic biotranformation. In this study, the liquid carbon dioxide ($LCO_2$) was employed as an alternative media for the enzymatic transesterification of canola oil. The conversion in the $LCO_2$ was comparable with those in organic solvents and the supercritical carbon dioxide, and under optimum conditions, the value reached 99.7%. It is expected that this method can provide a new type of biodiesel production process with higher energy efficiency and lower environmental impact.

• Journal of Korea Port Economic Association
• /
• v.36 no.2
• /
• pp.37-52
• /
• 2020

This study deals with the terms of three connection factors that promote air cargo transportation in the east-south area: a firm's subjective factors, industrial environment factors, and governmental policy factors. According to the analysis results, a firm's subjective factors (4.48) scored highest of the three promotion factors, followed by industrial environment factors (4.20) and government policy factors (3.88). Therefore, it is important to promote to air cargo transportation in the east-south area a firm's subjective factors (1) to procure concentrated market strategy and real market capacity, (2) to procure speedy satisfaction of customer needs and confidence, (3) to enhance aviation route development, and (4) to enhance business ability of airlines and forwarders. Next, air cargo transportation should be promoted in the east-south area by considering industrial environment factors and government policy factors.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.3841-3850
• /
• 2012

Objective: The objective of this study was to explore the knowledge and perceptions of Malaysian tradition healers towards cancer and cancer prevention. Methodology: A total of 25 participants agreed to participate in this qualitative study during the period from $20^{th}$ July 2011 until $24^{th}$ of September 2011. The proposal of this study was approved by the Ethics Committee of Management and Science University (MSU). Once the participant agreed to be interviewed, date, time and place of the interviews were determined. Consent form was obtained from participants before the interview began. Participants were briefed about the study and its purpose, and after asking their permissions, their replies were recorded. The data was organized into themes and analyzed manually. Results: Twenty-five Malaysian traditional healers participated in this qualitative study. The age of participants ranged between 26 to 78 years old. The majority were in the age group of 31-60 years old, male, Chinese, degree holders with a monthly income ranging from 1,000-5,000 Ringgit Malaysia (RM) and were married (56%, 80%, 48%, 52%, 68%, 84% respectively). The majority defined cancer as having high cholesterol or abscess accumulation. A few of them defined cancer as a type of cell growth. The majority mentioned that food and unhealthy lifestyles are the primary causes of cancer. Surprisingly some of them mentioned that cancer is caused by interference by ghosts. Regarding the diagnosis of cancer, the majority mentioned that they refer their patients to modern physicians' medical report when it comes to diagnosing or treating patients with cancer. The most common cancers that many patients came to seek treatment were breast cancers, followed by colon cancers, liver and lung cancers. Conclusions: Despite good knowledgeabout the causes of cancer among traditional healers, misconceptions still exist. Insufficient knowledge about the definition of cancer was noted among the traditional healers. This urges immediate action by the Ministry of Health of Malaysia to set up a strict regulation and regular monitoring of the traditional healers nationally. Traditional and Complementary Medicine may be integrated into the healthcare system and need to have sustained cooperation for the benefit of patients since about 80% of patients use traditional medicines.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.01a
• /
• pp.235-238
• /
• 2017

This study was to develop a portable digital radiography (PDR) system with a function measuring the X-ray source-with-detector angle (SDA) and to evaluate the imaging performance for the diagnosis of chest imaging. The SDA device consisted of an Arduino, an accelerometer and gyro sensor, and a Bluetooth module. According to different angle degrees, five anatomical landmarks on chest images were assessed using a 5-point scale. Mean signal-to-noise ratio and contrast-to-noise ratio were 182.47 and 141.43. Spatial resolution (10% MTF) and entrance surface dose were 3.17 lp/mm ($157{\mu}m$) and 0.266mGy. The angle values of SDA device were not significant difference as compared to those of the digital angle meter. In chest imaging, SNR and CNR values were not significantly different according to different angle degrees (repeated-measures ANOVA, p>0.05). The visibility scores of the border of heart, 5th rib and scapula showed significant differences according to different angles (rmANOVA, p<0.05), whereas the scores of the clavicle and 1st rib were not significant. It is noticeable that the increase in SDA degree was consistent with the increase of visibility score. Our PDR with SDA device would be useful to be applicable to clinical radiography setting according to the standard radiography guideline at various fields.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.1
• /
• pp.117-117
• /
• 1992

Pubilc utility industries including the electric utility industry are facing a new stream of privatization com-petition with the private sector and deregulation. The necewssity to solve now and in the future power supply and demand problems has been increasing through the sophisticated generation expansion plan(GEP) approach con-sidering not only KEPCo's supply-side resources but also outside resources such as non-utility generation(NUG) demand-side management (DSM). Under the environmental situation in the current electric utility industry a new approach is needed to acquire multiple resources competitively. This study presents the development of a modified electric generation expansion analysis system(EGEAS) model with avoided cost based on the existing EGEAS model which is a dynamic program to develope an optimal generation expansion plan for the electric utility. We are trying to find optimal GEP in Korea's case using our modified model and observe the difference for the level of reliabilities such as the reserve margin(RM) loss of load probability(LOLP) and expected unserved energy percent(EUEP) between the existing EGEAS model and our model. In addition we are trying to calculate avoided cost for NUG resources which is a criterion to evaluate herem and test possibility of connection calculation of avoided cost with GEP implementation using our modified model. The results of our case study are as follows. First we were able to find that the generation expansion plan and reliability measures were largely influenced by capacity size and loading status of NUG resources, Second we were able to find that avoided cost which are criteria to evaluate NUG resources could be calculated by using our modified EGEAS model with avoided cost. We also note that avoided costs were calculated by our model in connection with generation expansion plans.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.500-505
• /
• 2007

The objectives of this research were to (1) identify the membrane fouling potential due to different fractions of NOM (2) correlate the physicochemical properties of NOM and membranes with the adsorption of humic substances on membrane (4) find out the effect of membrane physical and chemical washing according to membrane material. The static adsorption test and adsorption test showed that hydrophobic organics adsorbed much more quickly than hydrophilic organics. In case of the effect of membrane properties on the adsorption of organic fractions, the adsorption rate ratio(a) of hydrophobic membrane (0.016, 0.077) was greater than that of hydrophilic membrane (0.010, 0.033) regardless of the kind of organic fractions. This suggests that the UF membrane fouling were occurred mainly by internal pore size decreasing due to adsorption of organic into pore surface for hydrophobic membrane, and by sieving of organics and forming a gel layer on the membrane surface for hydrophilic membrane. In conclusion, the decrease in the pore volume, which was caused by the organic adsorption into the internal pore, was greater with the hydrophobic membrane than with the hydrophilic membrane. In case of the effect of membrane properties on permeate flux, the rate of flux decline for the hydrophobic membrane was significantly greater than that for the hydrophilic membrane.