• Tuberculosis and Respiratory Diseases
• /
• 제57권5호
• /
• pp.434-438
• /
• 2004

배 경 : 기관 내관 풍선(cuff)의 압력은 과도하게 높으면 기관에 손상을 일으키고, 낮으면 압력 누출이 초래되므로 적절한 압력 유지가 필요하다. 적절한 cuff의 압력을 유지하기 위해서 시행하는 최소 밀폐압 (minimal occlusion pressure) 방법에서 cuff의 압력은 최고 흡기압(peak inspiratory pressure)의 영향을 받는다고 알려져 있다. 그러나 최고 흡기압 이외의 다른 요소, 특히 환기 용적과의 관련성은 잘 알려져 있지 않다. 이에 저자들은 인공호흡기 치료를 받는 환자들에서 동일한 최고 흡기압을 유지하면서 상시량을 변화시키는 것이 기관 내관 cuff의 최소 밀폐압에 영향을 주는지 보고자 하였다. 방 법 : 인공 호흡기 치료 중인 환자 10명을 대상으로 cuff 압력 측정계를 이용하여 공기 누출이 일어나지 않는 cuff의 최소 압력(최소 밀폐압)을 구하였다. 최고 흡기압을 일정하게 유지하도록 인공호흡기의 설정을 조절하면서 1회 호흡량을 10% 증가시킨 용적과 10% 감소시킨 용적을 각각 적용하면서 최소 밀폐압을 측정하여 비교하였다. 결 과 : 초기 설정에서 최고 흡기압은 $32.6{\pm}4.72cmH_2O$ 였고, 최소 밀폐압은 $19.0{\pm}2.26$ mmHg 였다. 각 환자의 최고 흡기압과 최소 밀폐압 사이에는 의미 있는 상관관계가 있었다(r=0.77, p<0.01). 상시량을 10% 증가시킨 경우(high volume state)의 최소 밀폐압은 $20.3{\pm}2.41$ mmHg로 증가하였고(p<0.05), 상시량을 감소시킨 경우(low volume state)의 최소 밀폐압은 $16.8{\pm}3.01$ mmHg로 감소하였다(p<0.001). 결 론 : 최고 흡기압 뿐만 아니라 1회 호흡량도 기관 내관 cuff의 최소 밀폐압에 영향을 미칠 수 있다.

• Clinical and Experimental Pediatrics
• /
• 제49권1호
• /
• pp.40-45
• /
• 2006

목 적 : BCG는 생균 백신이므로 국소궤양이나 림프절염은 물론 BCG균에 의한 전신감염도 보고되고 있다. 특히 BCG 접종 후 발생한 화농성 림프절염은 치료 방법이 명확하지 않은 상태이다. 저자들은 BCG 접종 후 발생한 화농성 림프절염의 양상과 그 치료 방법의 하나로 세침흡인 후 rifampicin 국소투여의 치료효과를 알아보고자 하였다. 방 법 : 2002년 3월부터 2004년 6월까지 2년 3개월간 전북대학교병원 소아과에서 BCG 접종 후 화농성 림프절염이 발생한 32례의 환아를 대상으로 임상적 특징과 세침흡인 후 rifampicin 국소투여를 시행하고, 그 효과를 관찰하였다. 결 과 : 대상 환아는 32례였으며 남아가 19례(59.4%), 여아가 13례(40.6%)였다. 1례(재태연령 30주)를 제외하고 모두 정상 만삭아로 출생하였다. 접종받은 BCG 백신은 모두 French 균주 제품(대한결핵협회)이었고, BCG 접종장소는 보건소가 13례(40.6%)로 가장 많았고 그 외 개인의원이 4례, 종합병원이 2례, 대학 병원이 2례였다. 접종시기는 30례(93.8%)가 생후 4주 이내였으며, 모두 피내접종으로 접종부위는 오른쪽 엉덩이에 접종한 1례를 제외하고는 모두 좌측 삼각근(96.9%)에 접종하였다. 화농성 림프절염의 발생시기는 BCG 접종 후 1개월에서 10개월까지 다양하였으며 대부분 1-6개월 사이에 발생하였다(27례, 78.1%). 총 32례 중 28례(87.5%)에서 한 개의 림프절이 침범되었는데 발생한 위치로는 좌측 액와 림프절이 24례(75.0%)로 가장 많았고, 그 외 좌측 견갑부가 3례, 좌측 쇄골 상와 부위가 3례, 좌측 액와와 좌측 쇄골 상와 부위가 함께 발생한 1례, 우측 서혜부가 1례 있었다. 우측 서혜부에 발생한 경우는 우측 둔부에 접종을 받은 경우였다. 32례 중 4례(12.5%)에서 두개의 림프절이 침범되었는데 3례는 좌측 액와에서 발생하였고, 1례는 좌측 액와와 좌측 쇄골 상와 부위에서 동시에 발생하였다. 치료는 20 gauge의 주사기로 흡인한 후 rifampicin 용액(결핵연구원 : rifampicin 1 mg/mL)을 종창 내에 주입하였고. 치료 후 2-4주 간격으로 재치료의 필요성 및 치료효과를 관찰하였다. 치료결과 17례(53.1%)는 1회 투여로 완치되었으며, 13례(40.6%)는 2회, 2례(6.3%)는 3회 투여 후 별다른 부작용이나 후유증 없이 완치되었다. 결 론 : BCG 접종 후 발생한 화농성 림프절염은 병변이 진행되어 누공이 형성된 후에도 입원이나 전신마취 및 수술이 필요없이 세침흡인과 rifampicin 국소투여가 경제적이고 효과적으로 생각된다.

• 대한수의학회지
• /
• 제15권2호
• /
• pp.147-152
• /
• 1975

Although considerable research has been done on the blood picture of the horse, hot-blooded and cold-blooded, little work has been made of the blood picture of the army pack horse, Jeju horse. The object of the present investigation was to make good this deficiency, and to suggest standard for the blood picture of army pack horses kept under the regular military training and the ideal feeding in the heart of a mountain. Blood samples were drawn from the jugular vein through a 15-gauge bleeding needle from 41 males and 28 females, aging 3 to 9 years old. It was taken between seven and nine o'clock in the morning. Animals were handled as quietly as possible to avoid any excitation. No restraint other than a halter was used. Enumeration of erythrocyte, total and differential leukocyte count, determination of hemoglobin in blood, and the value of packed cell volume were male in the usual manner, and erythrocytic constant was calculated by the method of Wintrobe. Erythrocyte count was $7.83{\pm}0.20(4.95{\sim}11.05){\times}10^6/mm^3$(SE). This value was much lower than hot-horses, but slightly higer than the values of cold-horse reported from foreign country. Concentration of hemoglobin in blood was $13.0{\pm}0.33(9.5{\sim}17.8)g/100ml$. This value was much higher than that of cold-horses observed by the other authors, approaching to the values of hot-horses. Packed cell volume was $32.1{\pm}0.92(22{\sim}42)ml/100ml$. This vague was a little higher than that of the other cold-horses. Mean corpuscular volume was $41.5{\pm}1.20(26.6{\sim}59.3){\mu}m^3$. This value matched so well with the other results recorded by various investigators. Mean corpuscular hemoglobin and mean corpuscular hemoglobin concentration were $16.9{\pm}0.43(12.3{\sim}25)$ pg and $41.0{\pm}0.45(29.1{\sim}51.1)g/100ml$, respectively. These values were significantly higher than the values found by the other investigations. Total leukocyte enumeration was $10.5{\pm}0.41(5.6{\sim}17.9){\times}10^3/mm^3$, being considered as normal. And differential leukocyte count of neutrophil was $44.5{\pm}2.23(15{\sim}76)%$, $5,527{\pm}234(2,231{\sim}9,144)/mm^3$, of lymphocyte $50.5{\pm}1.19(19{\sim}77)%$, $4,307{\pm}125(1,456{\sim}11,098)/mm^3$, of monocytel (0~4)%, $105(0{\sim}352)/mm^3$, of eosiophil 3.2(0~14)%, $340(0{\sim}1,232)/mm^3$ and of basophil 0.25(0~3)%, $23(0{\sim}236)/mm^3$. The percentage of the differential count obtained from the present work showed a good agreement with the results of various authors. Of the horses examined monocyte was found from 42 horses, eosinophil from 62 horses and basophil from 10 horses. No significant differences recognized between male and female horses, and the effect of age was not observed between three to nine years old. Judging from the blood picture of the present investigation, it could be stated that the army pack horses on training were kept better than the average farming conditions.

• Journal of Preventive Medicine and Public Health
• /
• 제4권1호
• /
• pp.41-64
• /
• 1971

During the period from July 1st to the end of November 1970, a survey on air pollution and noise level was made in Seoul, Pusan and Taegu, the three largest cities in Korea. Each city was divided into 4-6 areas; the industrial area, the semi-industrial area, the commercial area, the residential area, the park area and the downtown area. Thirty eight sites were selected from each area. A. Method of Measurement : Dustfall was measured by the Deposit Gauge Method, sulfur oxides by $PbO_2$ cylinder method, suspended particles by the Digital Dust Indicator, Sulfur dioxide ($SO_2$) and Carbon Monoxide (CO) by the MSA & Kitakawa Detector and the noise levels by Rion Sound Survey meter. B. Results: 1. The mean value of dustfall in 3 cities was $30.42ton/km^2/month$, ranging from 8.69 to 95.44. 2. The mean values of dustfall by city were $33.17ton/km^2/month$ in Seoul, 32.11 in Pusan and 25.97 in Taegu. 3. The mean values of dustfall showed a trend of decreasing order of semi-industrial area, downtown area, industrial area, commercial area, residential area, and park area. 4. The mean value of dustfall in Seoul by area were $52.32ton/km^2/month$ in downtown, 50.54 in semi-industrial area, 40.37 in industrial area, 24,19 in commercial area, 16.25 in park area and 15.39 in residential area in order of concentration. 5. The mean values of dustfall in Pusan by area were $48.27ton/km^2/month$ in semi-industrial area, 36.68 in industrial area 25.31 in commercial area, and 18.19 in residential area. 6. The mean values of dustfall in Taegu by area were $36.46ton/km^2/month$ in downtown area, 33.52 in industrial area, 20.37 in commercial area and 13.55 in residential area. 7. The mean values of sulfur oxides in 3 cities were $1.52mg\;SO_3/day/100cm^2\;PbO_2$, ranging from 0.32 to 4.72. 8. The mean values of sulfur oxides by city were $1.89mg\;SO_3/day/100cm^2\;PbO_2$ in Pusan, 1.64 in Seoul and 1.21 in Taegu. 9. The mean values of sulfur oxides by area in 3 cities were $2.16mg\;SO_3/day/100cm^2\;PbO_2$ in industrial area, 1.69 in semi-industrial area, 1.50 in commercial area, 1.48 in downtown area, 1.32 in residential area and 0.94 in the park area, respectively. 10. The monthly mean values of sulfur oxides contents showed a steady increase from July reaching a peak in November. 11. The mean values of suspended particles was $2.89mg/m^3$, ranging from 1.15 to 5.27. 12. The mean values of suspended particles by city were $3.14mg/m^3$ in Seoul, 2.79 in Taegu and 2.25 in Pusan. 13. The mean values of noise level in 3 cities was 71.3 phon, ranging from 49 to 99 phon. 14. The mean values of noise level by city were 73 phon in Seoul, 72 in Pusan, and 69 in Taegu in that order. 15. The mean values of noise level by area in 3 cities showed a decrease in the order of the downtown area, commercial area, industrial area and semi-industrial area, park area and residential area. 16. The comparison of the noise levels by area in 3 cities indicated that the highest level was detected in the downtown area in Seoul and Taegu and in the industrial area in Pusan. 17. The daily average concentration of sulfur dioxides ($SO_2$) in 3 cities was 0.081 ppm, ranging from 0.004 to 0.196. 18. The daily average concentrations of sulfur dioxides by city were 0.092 ppm in Seoul, 0.089 in Pusan and 0.062 in Taegu in that order. 19. The weekly average concentration of carbon monoxides(CO) was 27.59 ppm. 20. The daily average concentrations of carbon monoxides by city were 33.37 ppm. in Seoul, 25.76 in Pusan and 23.65 in Taegu in that order. 21. The concentration of $SO_2$ and CO reaches a peak from 6 p. m. to 8 p. m. 22. About 3 times probably the daily average concentration of CO could be detected in the downtown area probably due to heavy traffic emission in comparison with that in the industial area. 23. As for daily variation of the concentration of $SO_2$ and CO it was found that the concentration maintains relatively higher value during weekdays in the industrial area and on the first part of the week in the downtown area.

• Journal of Preventive Medicine and Public Health
• /
• 제5권1호
• /
• pp.1-7
• /
• 1972

During the period from June 1st 1971 to November 30 th 1971, studies on air pollution were made in Kwangju city. The city was divided into 6 areas; the downtown area, the semi-downtown area, the heavy traffic area, the commercial area, the residential area, the park area, 13 surveying sites were selected each representing the characteristics of the area. The Measurement methods which were used are described below. Sulfur oxides were measured by $PbO_2$ cylinder method, sulfur dioxides ($SO_2$) and carbon monoxide (CO) by the MSA & Kitakwa detector, dustfall by the Deposit gauge method, and the noise levels by the Kanomax soundlevel meter. The results obtained are as follows: 1. The mean value of sulfur oxides in Kwangju city was $1.16mg\;SO_3/day/100cm^2\;PbO_2$, ranging from $0.45mg\;SO_3/day/100cm^2\;PbO_2$ to $3.10mg\;SO_3/day/100cm^2\;PbO_2$. 2. The mean values of sulfur oxides according to its specific area in the city were $1.45mg\;SO_3/day/100cm^2\;PbO_2$ in heavy traffic area, 1.36 in downtown area, 1.23 in semi-downtown area, 1.11 in commercial area, 0.96 in residential area, and 1.07 in park area, respectively. 3. The average concentration of sulfur dioxide was 0.063 ppm from 2 to 5 P.M in Kwangju city. 4. The average concentrations of sulfur dioxides according to its specific area, from 2 to 5 P.M, in the city were 0.084 ppm in heavy traffic area & downtown area, 0.067 in commercial area, 0.053 in semi-downtown area, 0.052 in residential area, and 0.036 in park area. 5. The average concentration of carbon monoxide was 22.3 ppm from 2 to 5 P.M, in Kwangju city. 6. The average concentrations of carbon monoxide according to its specific area, from 2 to 5 P.M, in the city were 27.0 ppm in downtown area, 26.3 in semi-downtown area, 23.0 in heavy traffic area, 21.7 in commercial area, 20.0 in residential arera, and 17.6 in park area. 7. The mean value of dusifall in Kwangju city was $29.28ton/km^2/month$, ranging from $9.85ton/km^2/month$ to $66.34ton/km^2/month$. 8. The mean values of dustfall according to its specific area in the city were $50.37ton/km^2/month$ in semi-downtown area, 42.76 in heavy traffic area, 34.67 in downtown area, 17.77 in commercial area, 14.40 in park area, and 14.76 in residential area. 9. The mean values of the soluble dust in Kwangju city was $10.23ton/Km^2/month$ and that of the insoluble dust was $19.05ton/Km^2/month$. 10. The mean value of noise level in Kwangju city was 62 phon, ranging from 37 phon to 88 phon. 11. The mean values of noise level according to its specific area in the city were 76 phon in heavy traffic area, 67 in semi-downtown area, 64 in downtown area, 59 in commercial area, 52 in part area, and 50 in residential area.

• 대한치과보철학회지
• /
• 제19권1호
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.163-169
• /
• 2024

India is a developing nation and has come with comprehensive way in modernizing its reducing poverty, economy and rising living standards for an outsized fragment of its residents. The STEM (Science, Technology, Engineering, and Mathematics) education plays an important role in it. STEM is an educational curriculum that emphasis on the subjects of "science, technology, engineering, and mathematics". In traditional education scenario, these subjects are taught independently, but according to the educational philosophy of STEM that teaches these subjects together in project-based lessons. STEM helps the students in his holistic development. Youth unemployment is the biggest concern due to lack of adequate skills. There is a huge skill gap behind jobless engineers and the question arises how we can prepare engineers for a better tomorrow? Now a day's Industry 4.0 is a new fourth industrial revolution which is an intelligent networking of machines and processes for industry through ICT. It is based upon the usage of cyber-physical systems and Internet of Things (IoT). Industrial revolution does not influence only production but also educational system as well. IoT in academics is a new revolution to the Internet technology, which introduced "Smartness" in the entire IT infrastructure. To improve socio-economic status of the India students must equipped with 21st century digital skills and Universities, colleges must provide individual learning kits to their students which can help them in enhancing their productivity and learning outcomes. The major goal of this paper is to present a low cost, effective learning mechanism for STEM implementation using Raspberry Pi 3+ model (Single board computer) and Node Red open source visual programming tool which is developed by IBM for wiring hardware devices together. These tools are broadly used to provide hands on experience on IoT fundamentals during teaching and learning. This paper elaborates the appropriateness and the practicality of these concepts via an example by implementing a user interface (UI) and Dashboard in Node-RED where dashboard palette is used for demonstration with switch, slider, gauge and Raspberry pi palette is used to connect with GPIO pins present on Raspberry pi board. An LED light is connected with a GPIO pin as an output pin. In this experiment, it is shown that the Node-Red dashboard is accessing on Raspberry pi and via Smartphone as well. In the final step results are shown in an elaborate manner. Conversely, inadequate Programming skills in students are the biggest challenge because without good programming skills there would be no pioneers in engineering, robotics and other areas. Coding plays an important role to increase the level of knowledge on a wide scale and to encourage the interest of students in coding. Today Python language which is Open source and most demanding languages in the industry in order to know data science and algorithms, understanding computer science would not be possible without science, technology, engineering and math. In this paper a small experiment is also done with an LED light via writing source code in python. These tiny experiments are really helpful to encourage the students and give play way to learn these advance technologies. The cost estimation is presented in tabular form for per learning kit provided to the students for Hands on experiments. Some Popular In addition, some Open source tools for experimenting with IoT Technology are described. Students can enrich their knowledge by doing lots of experiments with these freely available software's and this low cost hardware in labs or learning kits provided to them.

• 대한간호학회지
• /
• 제2권1호
• /
• pp.3-33
• /
• 1971

Nursing of today has as one of its objectives the solving of problems related to human needs arising from the demands of a rapidly changing society. This nursing objective, I believe, can he attained by the appropriate application of scientific principles in the giving of comprehensive nursing care. Comprehensive nursing care may be defined as nursing care which meets all of the patient's needs. the needs of patients are said to fall into five broad categories: physical needs, psychological needs, environmental needs, socio-economic needs, and teaching needs. Most people who become ill have adjustment problems related to their new situation. Because patient teaching is one of the most important functions of professional nursing, the success of this teaching may be used as a gauge for evaluating comprehensive nursing care. This represents a challenge foe the future. A questionnaire consisting of 67 items was distributed to 200 professional nurses working ill direct patient care at Yonsei University Medical Center in Seoul, Korea. 160 (80,0%) nurses of the total sample returned completed questionnaires 81 (50.6%) nurses were graduates of 3 fear diploma courser 79 (49.4%) nurses were graduates of 4 year collegiate nursing schools in Korea 141 (88,1%) nurses had under 5 years of clinical experience in a medical center, while 19 (11.9%) nurses had more than 5years of clinical experience. Three hypotheses were tested: 1. “Nurses had high levels of concept and knowledge toward patient teaching”-This was demonstrated by the use of a statistical method, the mean average. 2. “Nurses graduating from collegiate programs and diploma school programs of nursing show differences in concepts and knowledge toward patient teaching”-This was demonstrated by a statistical method, the mean average, although the results showed little difference between the two groups. 3. “Nurses having different amounts of clinical experience showed differences in concepts and knowledge toward patient teaching”-This was demonstrated by the use of a statistical method, the mean average. 2. “Nurses graduating from collegiate programs and diploma school programs of nursing show differences in concepts and knowledge toward patient teaching”-This was demonstrated by a statistical method, the mean average, although the results showed little difference between the two groups. 3. “Nurses having different amounts of clinical experience showed differences in concepts and knowledge toward patient teaching”-This was demonstrated by the use of the T-test. Conclusions of this study are as follow: Before attempting the explanation, of the results, the questionnaire will he explained. The questionnaire contained 67 questions divided into 9 sections. These sections were: concept, content, time, prior preparation, method, purpose, condition, evaluation, and recommendations for patient teaching. 1. The nurse's concept of patient teaching: Most of the nurses had high levels of concepts and knowledge toward patient teaching. Though nursing service was task-centered at the turn of the century, the emphasis today is put on patient-centered nursing. But we find some of the nurses (39.4%) still are task-centered. After, patient teaching, only a few of the nurses (14.4%) checked this as “normal teaching.”It seems therefore that patient teaching is often done unconsciously. Accordingly it would he desirable to have correct concepts and knowledge of teaching taught in schools of nursing. 2. Contents of patient teaching: Most nurses (97.5%) had good information about content of patient teaching. They teach their patients during admission about their diseases, tests, treatments, and before discharge give nurses instruction about simple nursing care, personal hygiene, special diets, rest and sleep, elimination etc. 3. Time of patient teaching: Teaching can be accomplished even if there is no time set aside specifically for it. -a large part of the nurse's teaching can be done while she is giving nursing care. If she believes she has to wait for time free from other activities, she may miss many teaching opportunities. But generally proper time for patient teaching is in the midmorning or midafternoon since one and a half or two hours required. Nurses meet their patients in all stages of health: often tile patient is in a condition in which learning is impossible-pain, mental confusion, debilitation, loss of sensory perception, fear and anxiety-any of these conditions may preclude the possibility of successful teaching. 4. Prior preparation for patient teaching: The teaching aids, nurses use are charts (53.1%), periodicals (23.8%), and books (7.0%) Some of the respondents (28.1%) reported that they had had good preparation for the teaching which they were doing, others (27.5%) reported adequate preparation, and others (43.8%) reported that their preparation for teaching was inadequate. If nurses have advance preparation for normal teaching and are aware of their objectives in teaching patients, they can do effective teaching. 5. Method of patient teaching: The methods of individual patient teaching, the nurses in this study used, were conversation (55.6%) and individual discussion (19.2%) . And the methods of group patient teaching they used were demonstration (42.3%) and lecture (26.2%) They should also he prepared to use pamphlet and simple audio-visual aids for their teaching. 6. Purposes of patient teaching: The purposes of patient teaching is to help the patient recover completely, but the majority of the respondents (40.6%) don't know this. So it is necessary for them to understand correctly the purpose of patient teaching and nursing care. 7. Condition of patient teaching: The majority of respondents (75.0%) reported there were some troubles in teaching uncooperative patients. It would seem that the nurse's leaching would be improved if, in her preparation, she was given a better understanding of the patient and communication skills. The majority of respondents in the total group, felt teaching is their responsibility and they should teach their patient's family as well as the patient. The place for teaching is most often at the patient's bedside (95.6%) but the conference room (3.1%) is also used. It is important that privacy be provided in learning situations with involve personal matters. 8. Evaluation of patient teaching: The majority of respondents (76.3%,) felt leaching is a highly systematic and organized function requiring special preparation in a college or university, they have the idea that teaching is a continuous and ever-present activity of all people throughout their lives. The suggestion mentioned the most frequently for improving preparation was a course in patient teaching included in the basic nursing program. 9. Recommendations: 1) It is recommended, that in clinical nursing, patient teaching be emphasized. 2) It is recommended, that insertive education the concepts and purposes of patient teaching he renewed for all nurses. In addition to this new knowledge, methods and materials which can be applied to patient teaching should be given also. 3) It is recommended, in group patient teaching, we try to embark on team teaching.

• 한국전통조경학회지
• /
• 제36권3호
• /
• pp.26-36
• /
• 2018

본 논문은 경주 옥산구곡의 위치와 경관 해석에 대한 연구이다. 옥산구곡은 회재(晦齋) 이언적(李彦迪)을 향사하는 옥산서원 앞을 흐르는 자계천(紫溪川, 자옥천(紫玉山)) 즉, 옥산천(玉山川)에 설정(設定)된 구곡으로 본 연구에서는 옥산구곡을 대상으로 문헌조사와 디지털 기기 분석을 통해 현장 실측분석을 수행하여 옥산구곡의 위치 및 설정상황을 확인하였다. 특히 Trimble Juno SB GPS로 측정한 구곡의 경위도와 같이 Google Earth Pro 및 지리정보원이 공개한 옥산구곡의 수치지형도를 이용해서 옥산구곡의 정확한 위치를 확정하였다. 문헌연구 및 현장조사를 통하여, 옥산구곡의 위치 비정 및 경관 해석 결과는 다음과 같다. 첫째, 퇴계 이황의 9세손 이야순(李野淳)은 이언적 사후 270년인 1823년 봄에 옥산서원을 방문하였다. 이때 이야순의 제안으로 이언적의 후손 이정엄(李鼎儼), 이정기(李鼎基), 이정병(李鼎秉) 등과 여러 선비들이 함께 옥산구곡을 처음 설정하고 함께 "옥산구곡가"를 창작했다. 이정엄의 "옥산동행기"는 옥산구곡의 설정할 때의 상황을 알려주는 결정적 자료이다. 둘째, 대부분의 구곡원림은 일반적인 시인묵객이 경영한 원림이 아니고 정통 성리학자들이 경영한 원림이다. 이언적과 이황의 후손이 "옥산구곡가"를 함께 창작한 것은 이언적이나 이황이 정통 주자학을 계승했다는 점에 대한 후손들의 자긍심의 한 표현이다. 셋째, 이정엄의 "옥산동행기"에는 "옥산구곡가"의 설곡 과정과 구곡가 창작 과정은 매우 구체적으로 기록되어 있는데, 구곡가의 설곡과정과 그때의 상황이 이처럼 구체적으로 드러난 것은 희귀한 사례라고 할 것이다. 넷째, 기존에 알려진 옥산구곡 제8곡과 제9곡의 위치를 새롭게 비정하였다. 확정된 제8곡 탁영대의 위치정보는 북위 $36^{\circ}01^{\prime}08.60^{{\prime}{\prime}}$,동경 $129^{\circ}09^{\prime}31.20^{{\prime}{\prime}}$이다. 9곡 사자암은 고문헌을 참고하여, 동서의 두 계곡이 모이는 아래쪽 바위로 비정하였다. 그 위치는 북위 $36^{\circ}01^{\prime}19.79^{{\prime}{\prime}}$, 동경 $129^{\circ}09^{\prime}30.26^{{\prime}{\prime}}$이다. 다섯째, 이정엄의 "옥산구곡가"에 나타난 경관요소와 경관현상은 형태요소, 의미요소, 풍토요소로 나누었다. 그 결과 이정엄의 조영관은 산수를 이상향으로 생각하는 점과 자연에 한가하게 노니는 심정과 아울러 무상감을 확인할 수 있었다. 여섯째, 경관요소와 경관현상들의 출현빈도를 살펴본 결과, 이정엄의 구곡가에서'물'과 '산'은 구곡원림을 조영하는 절대적인 요소였다. 따라서 이 구곡가에는 신선사상(神仙思想) 및 은거사상(隱居思想)이 내재되어 있는 것은 물론 산수간의 조화를 통해 자연과 하나가 되는 물아일체의 사상과 성리학적인 수행관을 살필 수 있었다.