• 제목/요약/키워드: 165cm

검색결과 296건 처리시간 0.028초

A Study on the Jacket Blocks for Adult Males according to their Somatotypes XS, YI, Yd, and AD2

  • Jung, Jae-Eun
    • 패션비즈니스
    • /
    • 제12권3호
    • /
    • pp.136-152
    • /
    • 2008
  • The purpose of this study was to provide dress forms and jacket blocks for adult males based on the analysis of their somatotypes. As the result of the research conducted for this study that was based on 1290 males of 20 to 54 years-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth. Also, master sizes were selected considering appearance frequency. XS type (master size: height 165cm and chest circumference 88cm), Yd type (master size: height 170cm and chest circumference 91cm), YI and AD2 types (master size: height 170cm and chest circumference 94cm) were selected to develop dress forms and their jacket blocks in this study. The procedure and results were follows; 1. The dress forms of XS, Yd, YI and AD2 types were produced base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New jacket blocks for XS, Yd, YI and AD2 types were developed based on the body surface developments through draping and the results of comparative investigation on the existing jacket blocks by wearing test. Also the drafting methods of new jacket blocks were provided. 3. The sensory evaluation by wearing test showed that the developed jacket blocks were estimated more highly in terms of chest's allowance, the front width's allowance, neck wrinkle, front allowance and overall appearance's fitness items than existing jacket blocks.

Effect of Buffer Composition, Sephadex Grade and Column Size on Filtration Based Quality Improvement of Semen from Murrah Buffalo Bull

  • Maurya, V.P.;Tuli, R.K.;Goyal, R.L.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제16권2호
    • /
    • pp.165-171
    • /
    • 2003
  • Sixty semen ejaculates collected at weekly interval from four Murrah Buffalo bulls over a period of seven months (Nov.1999 to May 2000) were used in the present study. Three buffer medium (sodium citrate, TES and Tris) were used for soaking of sephadex. Three grades of sephadex (G-15,G-100, and G-200) were used for preparation of columns. Columns of three different height (one, two and three cm) were used for separation of semen. Twenty semen ejaculates were used in each project. In the first experiment each semen ejaculates was divided into four parts. One part was kept as control and other three parts were passed thought one cm column of sephadex G-15 prepared in three different buffers. There was significant (p<0.05) increase in percent progressive sperm motility and percent live spermatozoa and decrease in percent abnormal spermatozoa and percent spermatozoa with damaged acrosome as well as sperm numbers after filtration through all the three columns. Sperm quality obtained in the filtrate of column prepared in Tris buffer was better in comparison to other two buffers. So the Tris buffer was used in the second trial. Twenty semen ejaculates were used in this experiment. Each semen ejaculate was divided into four parts. One part was kept as control (non-filtered) and other three parts were passed through columns of different grade of sephadex (G-15, G-100 and G-200). Progressive sperm motility and live sperm percentage improved significantly while decline in percent abnormal spermatozoa and percent spermatozoa with damaged acrosome and sperm concentration was observed after filtration through all the columns as compared to control (non-filtered) semen. Since post filtration quality of semen was better in the sephadex G-100 column, therefore it was selected for the next experiment. In third experiment, Tris buffer and sephadex G-100 were used for preparing columns of different height (one, two and three cm) and twenty semen ejaculates were filtered. The quality characteristics of semen (percent progressive sperm motility, percent live spermatozoa and sperm concentration) after filtration through one cm column were significantly (p<0.05) higher than after filtration through columns of two and three cm height. However non -significant (p>0.05) difference due to height of columns was observed for percent abnormal and percent damaged acrosome but 1 cm column comparatively gave better result than of 2 and 3 cm column height.

노년 여성의 표준 신체치수 설정에 관한 연구(제2보) -체형분류와 표준 신체치수- (Development of Standard Body Measurement for Elderly Women(II) - Somatotype Classification & Standard Body Measurement -)

  • 이정임;주소령;남윤자;류영실
    • 한국의류학회지
    • /
    • 제28권3_4호
    • /
    • pp.377-386
    • /
    • 2004
  • This report is the second study to develop the standard tables of body measurements to be used for improving the fit of garments and patterns for women aged 60 and older. The purpose of this study is to suggest the new sizing system proper to the women aged 60 and older by classifying their somatotype and developing the standard tables of body measurements for each somatotype. The data are the anthropometric measurements of 329 women aged 60 and older measured in 2001 and the 1997 National Somatometry Survey data. The major contents of this study are as follows. The applicability of KS K 0051 and ISO 3637 sizing systems to the women aged 60 and older was investigated by analyzing the distribution of height and drop index the difference of hipgirth and bustgirth. In this result, we certified the two sizing systems were not so proper to elderly women and the new sizing system proper to them was required. So, we classified the somatotype of the women aged 60 and older to 3 groups, 135cm$\leq$H(height)<145cm, 145cm$\leq$H<155cm, 155cm$\leq$H<165cm by height and classified to 3 groups, -4cm$\leq$D(drop)<16cm, -4cm$\leq$D<4cm, -l6cm$\leq$D<-4cm by drop index, and we suggested more proper sizing system for women aged 60 and older by compounding height and drop groups. We also developed the standard tables of body measurements every bustgirth groups of 9 somatotypes. We expect the standard tables of body measurements to applicate to manufacture clothing for elderly women.

섬수약침 마취후 수술적으로 제거된 표피낭종 증례 (A Case of Epidermal Cyst Using Surgical Method After Bufonis Venenum Pharmacopuncture Anesthesia)

  • 이득주;권강;서형식
    • 한방안이비인후피부과학회지
    • /
    • 제30권2호
    • /
    • pp.165-169
    • /
    • 2017
  • Objectives : The aim of this study is to report the effect of surgical method after Bufonis Venenum Pharmacopuncture Anesthesia on epidermal cyst. Methods : A 49-year-old male was presented with a $1.5{\times}1.5(cm)$ sized epidermal cyst on the upper back. Local anesthesia was achieved with Bufonis Venenum pharmacopuncture. After 5 minutes, 2.5cm incision was made using 11th blade. To minimize bleeding, the laser($CO_2$ Hani-maehwa laser-surgical mode) was excised to the cyst wall. After incision, cyst were separated and removed using adson forceps and iris scissors. Then buried intradermal suture and simple interrupted suture were performed. Yeonkyopaedok-san was administered for 5 days for anti-inflammatory effects. After 10 days, the suture was removed after confirmation of skin adhesion. Results : Cyst size measured $1.0{\times}1.0{\times}1.0(cm)$. Until the suture is removed, Adverse effects were not reported. Conclusions : Bufonis Venenum pharmacopuncture applies to local anesthesia. Korean medicine cautery method applies to laser($CO_2$ Hani-maehwa laser). It can be considered that To expand the application of surgical treatment in korean medicine.

중성자 조사에 의해 생성된 점결함 연구 (A Study on Point Defect Induced with Neutron Irradiation)

  • 김진현;이운섭;류근걸;김봉구;이병철;박상준
    • 한국산학기술학회논문지
    • /
    • 제3권3호
    • /
    • pp.165-169
    • /
    • 2002
  • 반도체 소자의 기판 재료로 사용되고 있는 실리콘 웨이퍼는 그 정밀도가 매우 중요하다. 본 연구에서는 균일한 Dopant농도 분포를 얻을 수 있는 중성자 변환 Doping을 이용하여 실리콘에 인(P)을 Doping하는 연구를 수행하였다. 본 연구에서는 하나로 원자로를 이용하여 고저항(1000∼2000Ωcm) FZ실리콘 웨이퍼에 중성자 조사하여 저항의 변화를 관찰하였고, 중성자 조사시 발생하는 점결함을 분석하여 점결함이 저항 변화에 미치는 영향을 알아보았다. 중성자 조사 전 이론적 계산에 의해 HTS조사공은 5Ωcm, 20.1Ωcm이고 IP3조사공은 5Ωcm, 26.5Ωcm, 32.5Ωcm이었고, 중성자 조사 후 SRP로 측정한 결과 실제 저항값은 HTS-1 2.10Ωcm, HTS-2 7.21Ωcm이었고. IP-1은 1.79Ωcm, IP-2는 6.83Ωcm, 마지막으로 IP-3는 9.23Ωcm이었다. DLTS측정 결과 IP조사공에서 새로운 피크의 결함을 발견할 수 있었다. 또한 중성자 조사후의 저항변화는 열중성자량에 의존하며 조사공의 종류와는 무관하다.

  • PDF

Optical and textural properties of AZO:H thin films by RF magneton sputtering system with various working pressures

  • ;;박춘배
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.165-165
    • /
    • 2010
  • AZO:H films were prepared by RF magnetron sputtering system with a AZO (2wt% $Al_2O_3$) ceramic target at a temperature of $150^{\circ}C$. The annealing treatments were carried out in hydrogen ambient for 1hr at a temperature of $400^{\circ}C$. The AZO:H films were etched with 1 % HCl. The influence of the properties of AZO:H films deposited in various working pressures is investigated. As a result, the AZO:H film deposited in 4mTorr showed excellent electrical property of $\rho=5.036{\times}10^{-4}{\Omega}cm$ and strongly oriented (002) peak. The transmittance in the wavelength of 450nm was above 80%. It can be used as front electrode for increasing efficiency of GaN LED.

  • PDF

고유전율 절연체를 활용한 저 전압 유연 유기물 박막 트랜지스터 (Low-voltage Organic Thin-film Transistors with Polymeric High-k Gate Insulator on a Flexible Substrates)

  • 김재현;배진혁;이인호;김민회
    • 센서학회지
    • /
    • 제24권3호
    • /
    • pp.165-168
    • /
    • 2015
  • We demonstrated low-voltage organic thin-film transistors (OTFTs) with bilayer insulators, high-k polymer and low temperature crosslinkable polymer, on a flexible plastic substrate. Poly (vinylidene fluoridetrifluoroethylene) (P(VDF-TrFE)) and poly (2-vinylnaphthalene) are used for high-k polymer gate insulator and low temperature crosslinkable polymer insulators, respectively. The mobility of flexible OTFTs is $0.17cm^2/Vs$ at gate voltages -5 V after bending operation.

만 9세~10세 남아의 저고리 원형설계에 관한 연구 (A Study on the Jeogori Pattern for 9 to 10 Year-old Boys)

  • 김미영;여혜린;권영숙
    • 복식
    • /
    • 제51권7호
    • /
    • pp.147-165
    • /
    • 2001
  • The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.

  • PDF

$C_{60}$(buckminsterfullurene) 홀주입층을 적용한 유기박막트랜지스터의 성능향상 (Performance enhancement of Organic Thin Film Transistor using $C_{60}$ hole injection layer)

  • 이문석
    • 대한전자공학회논문지SD
    • /
    • 제45권5호
    • /
    • pp.19-25
    • /
    • 2008
  • 본 연구에서는 유기반도체인 펜타센과 소스-드레인 금속전극사이에 $C_{60}$을 홀주입층으로 적용한 유기박막트랜지스터를 제작하여 $C_{60}$을 삽입하지 않은 소자와의 전기적특성을 비교하였다. $C_{60}/Au$ 이중전극을 사용한 소자의 경우 Au단일전극을 사용한 소자와 비교하였을 때 전하이동도는 0.298 $cm^2/V{\cdot}s$에서 0.452 $cm^2/V{\cdot}s$ 문턱전압의 경우 -13.3V에서 -10.8V로 향상되었으며, contact resistance를 추출하여 비교하였을 경우 감소함을 확인할 수 있었다. 이러한 성능의 향상은 $C_{60}$을 Au와 pentacene 사이에 삽입하였을 경우 Au-pentacene 간의 원하지 않는 화학적 반응을 막아줌으로써 홀 주입장벽를 감소시켜 홀 주입이 향상되었기 때문이다. 또한 Al을 전극으로 적용한 OTFT도 제작하였다. 기존에 Al은 OTFT에 단일전극으로 사용하였을 경우 둘간의 높은 홀 주입장벽으로 인해 채널이 거의 형성되지 않았으나, $C_{60}/Al$ 이중전극을 사용한 소자의 경우 전하이동도와 전류점멸비은 0.165 $cm^2/V{\cdot}s$, $1.4{\times}10^4$ 으로써 Al를 단일전극으로 사용하는 소자의 전기적 특성에 비해 크게 향상되어진 소자를 제작할 수 있었다. 이는 $C_{60}$과 Al이 접합시에 interface dipole의 형성으로 Al의 vacuum energy level이 변화로 인한 Al의 work function이 증가되어 pentacene과 Al간의 hole injection barrier가 감소되었기 때문이다.

보령지역 두 석면광산의 성인 차이 (Genetic Differences of Two Asbestos Mines, Boryoung Area)

  • 송석환;임호주;이우석
    • 자원환경지질
    • /
    • 제46권2호
    • /
    • pp.165-178
    • /
    • 2013
  • 이 연구는 충남 보령 정전 및 오천 지역 석면 광상의 성인적 차이에 대해서 이다. 두 광산은 지난 수십년 동안 석면 광산으로 개발이 되었던 곳이다. 정전광산의 모암은 사문암이고 오천광산의 모암은 백운암이다. 석면 시료 및 모암시료가 야외 조사에서 채취 되었고, 석면의 종류 및 원소 함량을 알아보기 위해 광학 현미경 및 주사전자 현미경으로 관찰되었고, X-선 회절분석기, 에너지 분산 분광장치를 이용하여 분석 되었다. 석면들은 열수의 유입통로로 추정되는 층리, 균열, 열극을 따라 발견이 되나, 둘 사이에서는 두드러진 특성 차이를 보인다. 정전의 사문암은 백석면, 투각섬석 석면, 양기석 석면을 포함한다. 비석면형의 투각섬석과 양기석도 발견이 된다. 백석면은 맥에서 교차 섬유, 미끌림섬유로서 산출되고, 수 mm에서 cm의 두께의 균열에서 산출된다. 투각섬석과 양기석 석면은 수 cm에서 수 십 cm 두께의 균열 및 열극을 따라 발견이 된다. 이는 정전지역의 석면이 사문암과 열수의 반응에 의해 형성되었음을 암시한다. 오천 지역의 백운암은 투각섬석 및 양기석 석면을 포함한다. 이 석면들은 층리, 균열, 열극에서 산출된다. 이는 오천 지역의 석면이 백운암과 열수의 상호 작용에 의해 형성 되었음을 암시한다. 위의 결과 들은 같은 행정 구역인 보령 지역에서도 두 다른 모암을 갖는 석면 광산이 위치함을 보여 주고 있다. 이들은 성인의 차이를 반영하여 석면광물에서도 차이를 보인다.