• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1991년도 추계연구발표회 논문개요집
• /
• pp.64-64
• /
• 1991

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.186-190
• /
• 2011

Periodically ordered mesoporous manganese oxides were synthesized in a single and double replication procedure. Mesoporous SBA-15 and -16 silica and their reverse replica carbons were successively used as hard templates. The silica and carbon pore systems were infiltrated with $Mn(NO_3)_2{\cdot}xH_2O$ or $Mn(AcAc)_2$, which was then converted to $Mn_2O_3$ at 873 K; the silica and carbon matrix were finally removed by NaOH solution or calcinations in air. The structure of the mesoporous $Mn_2O_3$, using a carbon template, corresponds to that of the original SBA-15 and SBA-16 silica. The products consist of hexagonally arranged cylindrical mesopores with crystalline pore walls or cubic mesoporous pores. The structure of replica has been confirmed by XRD, TEM analysis, and its electrochemical properties were tested with cyclic voltammetry. Formation of $Mn_2O_3$ inside the mesoporous carbon pore system showed much improved electrical properties.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.19-22
• /
• 2011

[ $BiFeO_3$ ]is a multiferroic material that attracts attentions of many research groups due to its potential as being ferroelectric and ferromagnetic above room temperature. We have prepared both undoped- and Mn-doped $BiFeO_3$ by sol-gel auto-ignition method. Doping of Mn has resulted in decreasing grain size from 60 to 32 nm. X-ray diffraction data show that the samples are pure and single-phase. Infrared measurements on $BiFeO_3$ and Mn-doped $BiFeO_3$ revealed intrinsic stretching vibrations of tetrahedral sites of $Fe^{3+}$-O and of octahedral $Bi^{3+}$-O as well. On the other hand, as the Mn concentration increases, the magnetic moment of $BiFeO_3$ increases. It gives some suggestions in manipulating structural and magnetic properties of $BiFeO_3$ by doping Mn.

• 한국재료학회지
• /
• 제16권6호
• /
• pp.394-399
• /
• 2006

Ferroelectric $HoMnO_3$ thin films were deposited on the Si(100) substrate at $700^{\circ}C$ for 2 hrs by metalorganic chemical vapor deposition (MOCVD) and post-annealed at 850oC by rapid thermal process (RTP). Electrical properties and crystalline phases of $HoMnO_3$ thin films were investigated as a function of postannealing time. Single phase of hexagonal symmetry with c-axis preferred orientation was obtained from $HoMnO_3$ thin films post-annealed at $850^{\circ}C$ for 5 min, while the c-axis preferred orientation was decreased with the increase of post-annealing time, and the thin films post-annealed at $850^{\circ}C$ for 15 min showed the mixture phases of hexagonal and orthorhombic symmetry. P-E (Polarization-Electric field) hysteresis loop of ferroelectric $HoMnO_3$ thin films was observed only for the single phase of hexagonal symmetry, but that was not observed for the mixture phases of the hexagonal and orthorhombic symmetry, which was discussed with the bond valence of Mn ion of crystalline phase. Leakage current density was dependent on the microstructure of thin films as well as the change of valence of Mn ion.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.153-160
• /
• 2011

The AISI 216L stainless steel with a composition of Fe-16Cr-6Ni-6Mn-1.7Mo (wt.%) was oxidized at $700{\sim}900^{\circ}C$ in air for 100 h. At $700^{\circ}C$, a thin $Mn_{1.5}Cr_{1.5}O_4$ oxide layer with a thickness of $0.4{\mu}m$ formed. At $800^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $FeCr_2O_4$ oxide layer with a total thickness of $30{\mu}m$ formed. The non-adherent scale formed at $800^{\circ}C$ was susceptible to cracking. At $900^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $Mn_{1.5}Cr_{1.5}O_4$ oxide layer formed, whose total thickness was $10{\sim}15{\mu}m$. The scales formed at $900^{\circ}C$ were non-adherent and susceptible to cracking. 216 L stainless steel oxidized faster than 316 L stainless steel, owing to the increment of the Mn content and the decrement of Ni content.

• 한국수소및신에너지학회논문집
• /
• 제5권1호
• /
• pp.1-8
• /
• 1994

Lattice structure, hydrogen absorption characteristics, discharge capacity and cycle life of $V_{22}Ti_{16}Zr_{16}Ni_{39}X_7$(X= Cr, Co, Fe, Mn, Al) alloys were investigated. The matrix phases of these alloys were the C14 Laves phase. Chromium-containing alloy had a vanadium-rich phase in addition to the Laves phase. The chromium, maganese, or aluminum-containing alloys had lower hydrogen equilibrium pressure and larger hydrogen absorption content than the cobalt or iron-containing alloys. The discharge capacities of these alloys were 270~330mAh/g. The discharge capacity according to the alloying element X decreased in the order of Mn>Cr>Co, Al)Fe. The charge/discharge cycle lives of the chromium, cobalt or iron-containing alloys were longer than those of maganese or aluminum-containing alloys due to the lower vanadium dissolution rate.

• 한국자기학회지
• /
• 제16권2호
• /
• pp.111-114
• /
• 2006

Zinc-blonde 구조를 가지는 CrAs와 MnAs에서 (110)면 원자층으로 이루어진 초격자의 자성을 제일원리 방법을 이용하여 연구하였다. 이를 위해 CrAs와 MnAs의 (110)층이 각기 세 층씩 교대로 반복되는 $(CrAs)_3(MnAs)_3(110)$ 초격자계의 전자구조를 총 퍼텐셜 선형보강평면파동(FLAPW) 에너지띠 방법을 이용하여 계산하였다. Cr-As로 이루어진 층과 Mn-As로 이루어진 층이 접합되는 계면에 있는 Cr과 Mn원자의 자기모멘트를 계산한 결과 각기 $3.07\;\mu_B$와 $3.74\;\mu_B$로 가운데 층의 Cr과 Mn의 자기모멘트 값인 $3.06\;\mu_B$와 $3.76\;\mu_B$보다 약간 크거나 작았다. 계산된 상태밀도로부터 이 계의 전자구조와 반쪽금속성을 고찰하였다.

• 한국주조공학회지
• /
• 제23권3호
• /
• pp.147-152
• /
• 2003

질소 용해도가 낮은 ${\delta}$상으로 응고가 시작되는 16Cr-3Ni 계 스테인리스강의 응고시 질소기포 형성에 미치는 질소 함량과 냉각속도의 영향이 조사되었으며 이를 기반으로 질소 기포 결함이 발생하는 임계 질소 함량을 예측하는 방법을 제시하였다. 질소함량의 증가는 질소 기포 결함을 증가시켰으며, 냉각속도의 증가는 질소기포결함의 형성을 다소 억제 할 수 있는 것으로 조사되었다. 실험적으로 구한 Fe-16Cr-3Ni-9Mn 합금의 임계 질소 함량은 0.19wt%였으며, 임계 질소 압력은 평형응고로 가정한 경우 1.27atm, Scheil 응고로 가정한 경우에는 1.23atm으로 계산되었다. 질소 용해도를 증가시킬 수 있는 Mn 함량의 변화에 따른 임계 질소 함량의 변화를 예측하기 위하여 계산된 임계 질소 압력을 Fe-16Cr-3Ni-11Mn 합금에 적용하였으며 이를 통해 얻은 임계 질소 함량은 평형응고로 가정한 경우 0.25wt%, Scheil 응고로 가정한 경우에는 0.24wt% 로 예측되었다. 예측 결과의 타당성을 확인하기 위하여 Fe-16Cr-3Ni-11Mn 합금의 실험 결과와 비교하였으며, 일치하는 결과가 얻어졌다.

• Childhood Kidney Diseases
• /
• 제10권2호
• /
• pp.162-173
• /
• 2006

Purpose : To report the decreasing indicence of HBV(Hepatitis B virus)-associated membranous nephropathy in children after HBV vaccination and to elucidate the clinical course and treatment strategies of IMN(Idiopathic membranous nephropathy). Methods : We retrospectively reviewed the clinico-pathological findings of HBV-MN and IMN patients who underwent a renal biopsy from 1986 to 2005. We compared the HBV-MN and the IMN groups and the remission and the non-remission groups of patients with IMN. Results : Among 24 cases of MN patients, HBV-MN comprised 6 cases(25%) and IMN 18 cases(75%). Clinical masnifestations were nephrotic syndrome(3 cases, 50%), nephritic syndrome(1 case, 16.7%), asymptomatic(2 cases, 33.4%) in the HBV-MN group, asymptomatic(10 cases, 55.5%), nephrotic syndrome(5 cases, 27.8%), and gross hematuria(3 cases, 16.7%) in the IMN groups. From 1996 to 2000, there were 2 cases(28%) of HBV-MN and 5 cases(72%) of IMN. After 2001 all 10 cases were IMN. In the HBV-MN group, 4 cases(66.7%) received interferon and 1 cases received methylprednisolone pulse therapy. In the IMN group, 16 cases(88.9%) received methylprednisolone, 8 cases(44.4%) were in complete remission, 2 cases(11.1%) were in partial remission, 2 cases(11.1%) were in chronic renal failure, and 5 cases(27.8%) were lost to follow-up with sustained proteinuria, 1 case(5.6%) continued to have frequent relapse of nephrotic syndrome without renal insufficiency. In the comparison between remission and non-remission groups, nephrotic range proteinuria and hypertension were more significantly common in the non-remission group(P<0.05). Conclusion : With HBV vaccination, HBV-MN has decreased markedly. IMN is a rare glomerular disease in children. Because the prognosis for patients with nephrotic range proteinuria is poor this group needs more aggressive treatment.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.2993-2999
• /
• 2015

강 제조 회사들은 연속주조금형의 표면을 보호하기 위해 Ni-B 또는 Ni-Co 합금 도금을 적용하고 있으며, 도금 층에 균열이 생기게 하는 황을 함유한 사카린 윤활제를 사용하고 있다. 균열 및 인장 응력을 유발하는 것은 Ni-S 화합물로 여겨진다. Ni-Mn-B 삼원합금은 Ni-S 화합물이 형성되기 이전에 Mn-S 화합물을 형성하여 균열을 억제하기 위해서 개발되었으나, Ni-Mn-B 합금 도금에 관한 국내나 해외 기준이 없다. 그리하여 새로이 개발된 Ni-Mn-B 도금을 평가하기 위한 신뢰성 평가기준을 개정하려한다. 가속수명시험을 개발하기 위해 FMEA(고장형태 영향분석)가 사용되어 도금의 주요 파괴 원인을 분석하였다. Ni-Mn-B 신뢰성 기준은 가속수명시험 방법을 포함하였고, 기본 성능 시험과 환경시험, 가속수명시험으로 분류되었으며, 80% 신뢰수준으로 B10수명 1 000시간을 보장하도록 고안되었다.