• Title/Summary/Keyword: 15% Hydrochloric acid

Search Result 88, Processing Time 0.019 seconds

Physicochemical and Microbiological Properties of Skate (Raja kenojei) Kimchi on the Market (시판 홍어 김치의 이화학적 및 미생물학적 특성)

  • Kim, Kyung-Hee;Cho, Hee-Sook
    • Journal of the Korean Society of Food Culture
    • /
    • v.23 no.2
    • /
    • pp.235-242
    • /
    • 2008
  • In this study, the physicochemical and microbiological properties of market-available skate (Raja kenojei) kimchi were evaluated in comparison to long-term fermented Baechu kimchi. The comparative results for the skate (Raja kenojei) and Baechu kimchi products are as follows: salt concentrations = 3.40% and 3.95%, respectively; pH and acidity values = 4.01 and 3.90, and 0.65% and 0.82%, respectively; redox potential Eh values = 119.82 mV and 123.08 mV respectively; reducing sugars levels = 15.51 mg% and 13.23mg%, respectively; ascorbic acid levels = 24.21mg% and 22.18mg%, respectively; color L-values = 46.86 and 44.54, a-values = 15.46 and 12.28, and b-values = 29.94 and 28.36, respectively; hardness properties = 11.36 kgf and 10.23 kgf, respectively; hot water soluble pectin (HWSP) contents and sodium hexametaphosphate soluble pectin (NaSP) contents = 15.23% and 17.35%, and 32.51% and 29.64%, respectively; hydrochloric acid soluble pectin (HClSP) contents = 55.1% and 53.2%, respectively; total viable cell counts = $4.78{\times}10^8$ and $1.35{\times}10^8$, respectively; lactic acid bacteria counts = $5.18{\times}10^5$ and $1.32{\times}10^5$, respectively; and yeast levels = $8.52{\times}10^5$ and $5.23{\times}10^5$, respectively.

Sequential Washing Techniques for Arsenic-Contaminated Soils near the Abandoned Iron-Mine (폐 철광산 주변 비소로 오염된 토양에 대한 연속 세척기법의 적용)

  • Hwang Jung-Sung;Choi Sang-il;Han Sang-Geun
    • Journal of Soil and Groundwater Environment
    • /
    • v.10 no.1
    • /
    • pp.58-64
    • /
    • 2005
  • Several tests were conducted to determine the optimum operational conditions of soil washing techniques for floe-forming arsenic-contaminated soils, collected from D abandoned Iron-mine in Korea. The optimum cut-off size was 0.15 mm $(sieve\;\#100)$, about $94\%$ of the mass of soils. Both sodium hydroxide and hydrochloric acid were effective to remove arsenic and the optimum mixing ratio (soil [g] : washing solution [mL]) was 1:5 for both washing agents. Arsenic concentrations, determined by KST Methods, for the dried floe solids obtained from flocculation at pH 5-6 were $990\~1,086\;mg/kg$ dry solids, which were higher concentrations than at the other pH values. Therefore, batch tests for sequential washings with or without removing floc were conducted to find the enhancement of washing efficiencies. After removing floe with 0.2 M HCl, sequential washings of 1 M HCl followed by 1 M NaOH showed the best results (15 mg/kg dry soil). The arsenic concentrations of washing effluent from each washing step were about $2\~3\;mg/L$. However, when these acidic and basic effluents were mixed together, arsenic concentration was decreased to be less than $50\;{\mu}g/L$, due to the pH condition of coagulation followed by precipitation for arsenic removal.

On the Recycling Substances and a Clean Technology Development for the Treatment of Mixed Acid Waste Water with Ozone (오존을 이용한 혼산폐수처리에 관한 청정기술개발 및 재이용 물질 회수에 관한 연구)

  • 김재우
    • Journal of environmental and Sanitary engineering
    • /
    • v.15 no.2
    • /
    • pp.34-40
    • /
    • 2000
  • In the tungsten industry, molybdenum wire which used as the center supporter for coil shape tungsten wire was removed. Nitric acid dissolution method which used prevalently up to the present, takes nitric acid as major component and use noxious material such as sulfuric acid and hydrochloric acid remove molybdenum wire which used as center supporter by dissolve selectively within the range of no damage on tungsten wire. Mixed acid waste water occurred to the process were difficult to be decomposed by the conventional methords. This mixed acid waste water was treated by ozone, and It was obtained using possible by-product through the treatment waste water. For the three reactors with the same volume ; Blank reactor, Disturbance plate reactor, Packed-bed reactor ; the results were as follows : For the blank reactor COD removal efficiency in the pH = 4 (HRT : 6hr) was 28.5%, COD removal efficiency in the pH = 7 (HRT : 6hr) was 28.6%, and COD removal efficiency in the pH = 10 (HRT : 6hr) was 27.8%. For the disturbance plate reactor COD removal efficiency in the pH = 4 (HRT : 6Min.) was 86.5%, COD removal efficiency in the pH =7 (HRT : 6Min.) was 84.4%, and COD removal efficiency in the pH = 10 (HRT : 60Min.) was 86.8%. For the packed-bed reactor COD removal efficiency in the pH = 4 (HRT : 40Min.) was 76.0%, COD removal efficiency in the pH = 7 (HRT : 40Min.) was 81.3%, and COD removal efficiency in the pH = 10 (HRT : 40Min.) was 84.6%. After O3 treatment using possible by-product(Na2SO4) was 150g/ℓ.

  • PDF

Micro-Porous Ceramics Using directionally $MgAl_2O_4/MgO$ eutectic crystals

  • Lee, Jong-Ho
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.15 no.6
    • /
    • pp.229-233
    • /
    • 2005
  • Novel process was tried to obtain micro-porous ceramic body containing continuous pore channel. $MgAl_2O_4/MgO$ eutectic fibers and rods have been grown successfully by the micro-pulling-down method, and the microstructures and optical characterizations of grown crystals were performed. $MgAl_2O_4/MgO$ eutectic fibers of $0.3{\sim}1mm$ in diameter and about 500 mm in length, and the rods having 5 mm in diameter with approximately 60 mm in length have been grown with the $6{\sim}120mm/hr$ of growth speed. The eutectic fibers showed homogeneous microstructure in which MgO fiber aligned to the growth direction in the $MgAl_2O_4$ (spinel) matrix. The grown crystals looked semitransparency under naked eyes. Optical and orientational characterizations were performed. The second phase of MgO (periclase) was easily removed by selective etching with hydrochloric acid, and then porous bodies were obtained.

Pharmaceutical studies on the polymorphism of hydrochlorothiazide

  • Kim, Bong-Hee;Kim, Johng-Kap
    • Archives of Pharmacal Research
    • /
    • v.7 no.1
    • /
    • pp.47-52
    • /
    • 1984
  • Four polymorphic forms (I, II, III and IV) of hydrochlorothiazide have been characterized on the basis of x-ray diffractometry and differential thermal analysis. Form I was obtained by crystallization from N, N-dimethylformamide and Form II was crystallized from hot methanol. Form III was precipitated from sodium hydroxide aqueous solution by treatment with hydrochloric acid and Form IV was crystallized from 50% methanol. The metastable form I was a most stable form among four polymorphs, which was stable more than ten months at room temperature. The thermodynamic parameters such as heat of solution, enthalpy, entropy, free energy difference and transition temperature were determined by the measurement of intrinsic dissolution rate. The transition temperature and the heat of transition between the metastable Form I an Form II were determined to be $299.15^{\circ}$K and 5.03 Kcal/mole, respectively and free energy difference ($\delta$ F) was 302. 13 cal/mole. Diuretic action of these four polymorphic forms was also evaluated by monitoring the difference in urinary excretion of sodium, potassium and magnesium in rats.

  • PDF

The Determination of Germanium(IV) by Linear Sweep Voltammetry and UV-VIS Spectrophotometry (Linear Sweep Voltammetry와 UV-VIS Spectrophotometry를 이용한 게르마늄 분석)

  • Choi, Won-Hyung;Lee, Jin-Sik;Kim, Jae-Soo;Kim, Do-Hun
    • Analytical Science and Technology
    • /
    • v.5 no.1
    • /
    • pp.7-15
    • /
    • 1992
  • Germainium(IV) was determined in perchloate supporting electrolyte solution containing phenylfluorone by hanging mercury drop electrode(HMDE) of Linear Sweep Voltammetry(LSV) and in hydrochloric acid solution by UV-VIS Spectrophotometry. The complex germanium(IV) with phenylfluorone was shown linear calibration curve in the range of $2.5{\sim}80{\mu}g/L$ by LSV and in the range of $10{\sim}300{\mu}g/L$ by UV-VIS Spectrophotometry.

  • PDF

Changes in the Titer of Protein and Cholesterol Content in Non-Diapause, Artificially Diapause Terminated and Diapause Eggs of Silkworm, Bombyx mori.

  • Moorthy, S.M.;Krishnan, N.;Bhattacharya, Tanmay;Chaudhuri, A.
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • v.15 no.2
    • /
    • pp.165-169
    • /
    • 2007
  • A differential specific pattern of variation in the metabolism of protein and cholesterol was noticed in non -diapause and diapause eggs due to the significant differences in embryonic development. The rate of metabolism was different due to specific demands of such metabolites during active embryogenesis and maintenance of diapause respectively. In general, the metabolic rate was found to be accelerated in non- diapause eggs just after egg deposition, while it was very slow in diapause eggs. When the diapause eggs were treated with hydrochloric acid within 16-20 hrs, the rate of turnover was found to very similar to non- diapause eggs, though the base level of protein and cholesterol was recorded to be different.

Influence of Juncus decipiens $N_{AKAI}$ on the Renal Function of Dogs (등심초(燈心草)의 개 신장(腎臟) 기능(機能)에 미치는 영향(影響))

  • Moon, Yung-Hee
    • Korean Journal of Pharmacognosy
    • /
    • v.6 no.2
    • /
    • pp.101-110
    • /
    • 1975
  • In this study attempts were made to explore effects of the water and alcohol extracts of Junci Herba on the renal function of dogs. The water extract (in a dose 15 mg/kg, i.v.) and alcohol extract (in a dose 1.5 mg/kg, i.v.) elicited a diuretic response and produced a marked diuresis during bicarbonate infusion whereas no diuresis ensues during infusion of hydrochloric acid. The ratios of potassium and sodium excreted in urine $(K^+/Na^+)$, pH of urine, Cosm (osmolar clearance) and $C_{H_2O}$ (free water clearance) increased but hemodynamic states changed little with both extracts. All the observed facts can be best explained on the assumption that Junci Herba inhibits the carbonic anhydrase in the tubule. Thus it produces the effect by increasing urinary potassium and sodium.

  • PDF

Reactions with Activated Nitriles : A new route for the synthesis of new pyridine and pyrazolopyridine derivatives

  • Attaby, Fawzy-A.;Eldin, Sanaa-M.
    • Archives of Pharmacal Research
    • /
    • v.13 no.3
    • /
    • pp.274-277
    • /
    • 1990
  • It has been found that $\alpha, \beta$-unsaturated nitrile derivatives 1-3 reached with S- methylisothiourea to give the prpone derivatives 4-6 respectively. Cyclisation of 4-6 using ethanolic hydrochloric acid afforded the pyridine derivatives 7-9 in good yields. On the other hand, the reactions of hydrazine hydrate and of phenylhydrazine with each of 7-9 gave the corresponding pyrazolopyridine derivatives 10-15. The structures of the newly synthesised derivatives were assigned on the basis of elemental analyses, IR and $^1H$-NMR spectral data studies.

  • PDF

Ultra-trace Arsenic Determination in Urine and Whole Blood Samples by Flow Injection-Hydride Generation Atomic Absorption Spectrometry after Preconcentration and Speciation Based on Dispersive Liquid-Liquid Microextraction

  • Shirkhanloo, Hamid;Rouhollahi, Ahmad;Mousavi, Hassan Zavvar
    • Bulletin of the Korean Chemical Society
    • /
    • v.32 no.11
    • /
    • pp.3923-3927
    • /
    • 2011
  • A noble method for pre-concentration and speciation of ultra trace As (III) and As (V) in urine and whole blood samples based on dispersive liquid-liquid microextraction (DLLME) has been developed. In this method, As (III) was complexed with ammonium pyrrolidine dithiocarbamate at pH = 4 and Then, As (III) was extracted into the ionic liquid (IL). Finally, As (III) was back-extracted from the IL with hydrochloric acid (HCl) and its concentration was determined by flow injection coupled with hydride generation atomic absorption spectrometry (FI-HGAAS). Total amount of arsenic was determined by reducing As (V) to As (III) with potassium iodide (KI) and ascorbic acid in HCl solution and then, As (V) was calculated by the subtracting the total arsenic and As (III) content. Under the optimum conditions, for 5-15 mL of blood and urine samples, the detection limit ($3{\sigma}$) and linear range were achieved 5 ng $L^{-1}$ and 0.02-10 ${\mu}g\;L^{-1}$, respectively. The method was applied successfully to the speciation and determination of As (III) and As (V) in biological samples of multiple sclerosis patients with suitable precision results (RSD < 5%). Validation of the methodology was performed by the standard reference material (CRM).