• Korean Journal of Poultry Science
• /
• v.22 no.1
• /
• pp.1-6
• /
• 1995

A total of 514 birds were used to investigate the influence of body weight and shank length at hatch on the body weights at various ages in growing pheasant. Statistical model included the terms of hatch and sex as fixed effects and the two covariates of body weight and shank length at hatch. In this model, the effects of hatch and sex on the body weights at the age of 4, 8, 12, 16 and 20 wk, and the average daily gains from hatch to 8 wk and from 8 to 16 wk of age were highly significant(P<0.01). All the regression coefficients of body weights and average daily gains on the body weight at hatch were also significant(P<0.01). Their estimates were 3.05.7.21. 13.89, 15.18 and 15.33 for the body weights at 4. 8, 12, 16 and 20 wk of age ; 0.111 and 0.142 for the average daily gains from hatch to 8 wk, and from 8 to 16 wk of age, respectively. On the shank length, only the regression coefficients of the body weights at 4 and 8 wk of age and the average daily gains from hatch to 8 wk of age were significant(P<0.01). Results of this study suggest that body weight at hatch do significantly affect the body weights in the growing periods up to' the 20 wk of age, but the shank length at hatch influences the body weights only at early age.1)

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.289-295
• /
• 2015

Purpose: From the perspective of biomechanics, joint moments quantitatively show a subject's ability to perform actions. In this study, the effect of normalization in the fast and asymmetric motions of a golf swing was investigated by applying three different normalization methods to the raw joint moment. Methods: The study included 13 subjects with no previous history of musculoskeletal diseases. Golf swing analyses were performed with six infrared cameras and two force plates. The majority of the raw peak joint moments showed a significant correlation at p < 0.05. Additionally, the resulting effects after applying body weight (BW), body weight multiplied by height (BWH), and body weight multiplied by leg length (BWL) normalization methods were analyzed through correlation and regression analysis. Results: The BW, BWH, and BWL normalization methods normalized 8, 10, and 11 peak joint moments out of 18, respectively. The best method for normalizing the golf swing was found to be the BWL method, which showed significant statistical differences. Several raw peak joint moments showed no significant correlation with measured anthropometrics, which was considered to be related to the muscle coordination that occurs in the swing of skilled professional golfers. Conclusions: The results of this study show that the BWL normalization method can effectively remove differences due to physical characteristics in the golf swing analysis.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.11-13
• /
• 2006

[ $M\"{o}ssbauer$ ] spectra of $Ti_{1-x-y}Co_xFe_yO_2(0.01{\leq}x,\;y{\leq}0.05)$ prepared with $^{57}Fe$ enriched iron have been taken at various temperatures ranging from 80 to 300K. The Mossbauer spectrum of $Ti0.94Co_{0.03}Fe_{0.03}O_2$ consists of a ferromagnetic (six-Lorentzian), a paramagnetic phase (doublet) and armorphous phase over all temperature ranges. Isomer shifts indicate $Fe^{3+}$ for the ferromagnetic phase and the paramagneic phase of $Ti_{1-x-y}Co_xFe_yO_2$ samples. It is noted that the magnetic hyperfine field of ferromagnetic phase had the value about 1.5 times as large as that of u-fe. The XRB data for $Ti_{1-x-y}Co_xFe_yO_2$ showed mainly rutile phase with tetragonal structures without any segregation of Co and Fe into particulates within the instrumental resolution limit. The magnetic moment per (Co+Fe) atom in $Ti0.94Co_{0.03}Fe_{0.03}O_2$, under the applied field of 1T was estimated to be about $0.332{\mu}_B$ which is ten times as large as that of $Ti0.97Co_{0.03}Fe_{0.03}O_2,\;0.024{\mu}_B$ per Co atom, suggesting a high spin configuration of Co and fe ions.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.28 no.4
• /
• pp.1-11
• /
• 2015

Objective : The aim of this study was to suggest guidelines using Nasal endoscopy index for objective pattern identification in allergic rhinitis patients. we performed a clinical study to investigate the relationship between Nasal endoscopy index and Cold-heat pattern identification for allergic rhinitis patients.Methods : We assessed 32 patients with allergic rhinitis using Nasal endoscopy index and the patients filled in Cold-Heat pattern questionnaires. Then, we analyzed the relationship between Nasal endoscopy index and Cold-heat pattern identification.Results : Pale and watery rhinorrhea scores were positively correlated with Cold questionnaire score (P<0.05).Conclusion : The results suggest that pattern identification using nasal endoscopy for allergic rhinitis can be useful for assessing the diagnosis of Cold-heat pattern identification and deciding guidelines of treatment.Acknowledgments : This work was supported by a Grant of the Traditional Korean Medicine R&D Project, Ministry of Health and Welfare, Republic of Korea (HI12C1889 and HI13C0530).

• The Korean Journal of Ecology
• /
• v.21 no.5_1
• /
• pp.465-473
• /
• 1998

This study was carried out to investigate the developmental process of plant community during the secondary succession and changes of soil properties in the burned areas lapsed 28 years after the forest fire in Mt.Palgong. The forest fire occurred on March, 1969 and the red pine (pinus densiflora) forest and its floor vegetation were burned down. The results are summarized as follows: the floristic composition of burned and unburned areas were composed of 49 and 48 species of vascular plants, respectively. The dominant species based on SDR4 of the burned sites were Lespedeza maximowicxii(87.75), Carex humilis (62.94), Rhododendron schippenbachii(55.78) and Miscanthus sinensis var.purpurascens (51.94). In contrast, Pinus densiflora (81.17), Quercus serrata (53.58)m Carex humilis (53.11) and Miscanthus sinenis var. purpuracens (52.42) were dominant in the unburned area. The biological spectra showed the $H-D_1-R_5-e$ type in both areas. The indices of similarity (CCs) between the two areas were 0.80. Degree of succession (DS) was 734 in the burned area and 809 in the unburned area. The species diversity (H) and evenness indices (e) in the burned and unburned areas were 2.05, 2.13 and 0.53, 0.55, respectively. Dominance index (C) in the burned and unburned areas were 0.30 and 0.32, respectively. Soil properties such as soil pH, content of organic matter, total nitrogen, total carbon, exchangeable potassium, sodium, calcium, and magnesium in burned area were comparatively higher than those of unburned area. Monthly changes of soil properties were of little significance except for some cases. These results suggest that there was relationship between trend of vegetation recovery and the changes of soil properties after the forest fire. Mixed forestation of fire-resistant species and nitrogen fixation species will be effective for reforestation after the forest fire.

• Genomics & Informatics
• /
• v.11 no.2
• /
• pp.83-92
• /
• 2013

Genetic studies on facial morphology targeting healthy populations are fundamental in understanding the specific genetic influences involved; yet, most studies to date, if not all, have been focused on congenital diseases accompanied by facial anomalies. To study the specific genetic cues determining facial morphology, we estimated familial correlations and heritabilities of 14 facial measurements and 3 latent factors inferred from a factor analysis in a subset of the Korean population. The study included a total of 229 individuals from 38 families. We evaluated a total of 14 facial measurements using 2D digital photographs. We performed factor analysis to infer common latent variables. The heritabilities of 13 facial measurements were statistically significant (p < 0.05) and ranged from 0.25 to 0.61. Of these, the heritability of intercanthal width in the orbital region was found to be the highest ($h^2$ = 0.61, SE = 0.14). Three factors (lower face portion, orbital region, and vertical length) were obtained through factor analysis, where the heritability values ranged from 0.45 to 0.55. The heritability values for each factor were higher than the mean heritability value of individual original measurements. We have confirmed the genetic influence on facial anthropometric traits and suggest a potential way to categorize and analyze the facial portions into different groups.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.5
• /
• pp.1-12
• /
• 2020

To assess the performance and characteristics of colored building-integrated photovoltaic (BIPV) modules, a comparative assessment of empirical performance was conducted on colored BIPV modules (gray, blue, and orange) and general BIPV module. These modules were installed on the south-facing slope (30°) for comparative assessment through a field test. Monitoring data were collected every 10 min from December 20, 2019 to January 21, 2020 and used to performance and characteristics analysis. Performance ratio and module efficiency were utilized during performance indexing for comparative assessment. For general BIPV modules, the operational efficiency was analyzed at 16.63%, whereas for colored BIPV modules, 13.70% (gray), 15.12 % (blue), and 14.49% (orange) were analyzed. It was discovered that the efficiency reduction caused by transmission losses owing to the application of colored cover glasses were 17.74% (gray), 9.05% (blue), and 9.86 % (orange), under field testing conditions. These values turned on an additional 7% reduction in efficiency for gray BIPV modules, compared to the degradation resulting from transmission drop (gray: 10.87%, blue: 8.99%, and orange: 9.02%) calculated using the efficiency of each module in standard test conditions (STC). Performance ratio analysis resulted in the following values: 0.92 for general BIPV modules, and 0.85 (gray), 0.91 (blue), and 0.91 (orange) for colored BIPV modules. As demonstrated by the above results, modules with a colored cover glass may differ in their operational performance depending on their color, unlike general modules. Therefore, in addition to the performance evaluation under STC, additional factors of degradation require consideration through field test.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.365-380
• /
• 2016

Purpose: The purpose of this study was to ascertain the need to reform curriculums for digital experts in a way that include the practical and educational aspects of dental labs by determining why educational reforms are needed to comply with changes in dental technology business that are brought by the applications of digital scanning and what changes are being actually brought by the use of CAD/CAM. Methods: This study analyzed the need of education and practice in relation to CAD/CAM by using the independent sample t-test and One-way ANOVA. in accordance with the participants demographic characteristics and job-related variables and factors related to CAD/CAM, and provided only some of the analysis results that were found statistically significant. Concerning the need of education and practice in relation to CAD/CAM, the study also used the independent sample t-test to measure difference in the perception of that need within each of the three groups, or those of job performance, job efficiency and knowledge gain at the signficance level of ${\alpha}=.05$. Results: Dental technologists surveyed here were perceiving that the use of CAD/CAM would bring changes in their job performance, job efficiency and knowledge gain. They were expecting that the biggest changes would be made in work climate and product quality as sub-areas of job performance. However, they said that in terms of job efficiency, the use of CAD/CAM would change job contribution, job satisfaction and job efficiency, but not lead to staffing. These results suggest that more special programs for CAD/CAM education are needed to bring up CAD/CAM experts who are more specialized. Conclusion: Among 13 skills related to CAD/CAM, what is most needed to be educated to dental technologists was "molding the occlusal surface" (M=4.19), followed by "designing the 3-D work" (M=4.17), "final shape modification" (M=4.16), "molding the border" (M=4.15) and "checking the fit of prothesis" (M=4.14) in order.

• Journal of the Korean Home Economics Association
• /
• v.26 no.4
• /
• pp.43-52
• /
• 1988

This study is intended to reveal the nutritional realities of school children due to their box lunch. The samples were chosen at random from the third grade to the sixth grade children in an elementary school in Seoul : 122 male and 111 female children, 233 children in all. among the subjects, 44.3% have a family of four, 34.3% have over 500,000 won of family income a month, and 44.3% of their mothers graduated from a high school. The average intake of calories is 573.6 Kcal, and the ratios of the calory intakes to the recommended amounts are 90.6% in the third grade children and from the fourth grade to the sixth grade, 79.5% in the male children and 82.9% in the female children. The average consumption of protein is 21.0g and the ratio of animal protein is 41.4%. the ratio of energy yield nutrients is 67.4% : 14.5 : 18.0 (carbohydrate : protein " fat). Considering the recommended amounts, the intake of protein is enough; the consumption of vit, A, thiamine, niacin are appropriate;and the intake of calories, Riboflabin and ascorbic acid, calcium, iron are deficient. Even though there is no significant difference between the socioeconomic factors (the standard of education of the subjects' mothers and family income0 and the intakes of calories and protein, there is a tendency that the consumption of protein intake si more abundant in the middle class than in any other class. The subjects' distribution of the physical growth index, is as follows; A (6.9%), B(19.3%), C(48.5%), D(13.7%) and E (11.6%). As the subjects' intake of calcium increases, the weight shows significant improvement (p<0.001). As the consumption of calories increases, the physical development shows significant improvement (p<0.05), and the weight shows significant increase (p<0.001).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.181-181
• /
• 2013

최근에 형광체 결정 입자의 크기와 적당한 활성제 이온의 종류를 선택하여 우수한 발광 특성을 갖는 세라믹 형광체를 합성하고자 많은 노력을 경주하고 있다. 본 연구에서는 비교적 간단한 장비로 구성되며, 볼밀을 통하여 초기 물질들을 혼합하고 분쇄하여 최적의 형광 특성을 갖는 형광체 분말을 비교적 용이하게 합성하기에 적합한 고상반응법을 사용하여 적색, 황색, 녹색 형광체 La2WO6:RE3+ (RE=Eu, Dy, Tb)를 제조하고자 한다. 사용한 초기 물질은 (99.99% 순도), (99.99%), (99.9%), (99.9%) (99.9%)을 화학 정량으로 준비하였고, 활성제 이온의 함량비를 0, 0.01, 0.05, 0.10, 0.20 mol로 각각 변화시켜 형광체를 제조하여 그것의 발광과 흡광, 결정 입자의 크기와 형상을 조사하였다. 이온이 도핑된 형광체의 경우에, 발광 스펙트럼은 이온의 함량비에 관계없이 모든 시료에서 전형적인 이온의 (j=1-4) 전이에 의한 발광 스펙트럼을 나타내었고, 가장 강한 적색 발광 파장은 611 nm에서 관측되었으며, 이온의 함량비가 0.15 mol에서 발광 피크가 장파장 쪽으로 10 nm 이동하였으며, 세 종류의 발광 스펙트럼의 세기는 최대를 나타내었다. 이온의 함량비가 더욱 증가함에 따라 모든 발광 스펙트럼의 세기는 순차적으로 감소하였다. 이 현상은 농도 소광 현상으로 해석 할 수 있다. 이온이 도핑된 형광체의 경우에, 이온의 함량비에 관계없이 모든 시료에서 이온의 전형적인 전이에 의한 발광 스펙트럼이 관측되었으며, j=13/2에서 가장 강한 황색 발광이 피크 581 nm에서 관측 되었다. 상대적으로 발광 세기가 약한 484 nm에 정점을 갖는 청색 발광스펙트럼은 전이 신호이다. 이온의 함량비가 0.10 mol 일 때 세 영역의 발광 스펙트럼의 세기는 최대를 나타내었다. 이온의 함량비가 증가함에 따라 모든 발광 스펙트럼의 세기는 순차적으로 감소하였다. 주 흡광 스펙트럼은 이온의 함량비에 관계없이 모든 시료에서 파장 250 nm에서 관측되었다. 이온이 도핑된 형광체의 경우에, 이온의 함량비에 관계없이 모든 형광체 분말은 발광 세기가 제일 강한 550 nm의 피크를 갖는 녹색 발광과 상대적으로 발광 세기가 약한 495와 590 nm에 피크를 갖는 청색과 주황색 발광 스펙트럼들이 각각 관측되었다. 이 발광 신호들은 Tb3+ 이온의 5D47Fj (j=4, 5, 6) 전이에 의해 발광된 신호임을 확인하였다.