• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.85-89
• /
• 2011

In this paper, a novel Class-E power amplifier using metamaterials has been realized with one RF LDMOS diffusion metal-oxide-semiconductor field effect transistor. The CRLH structure can lead to metamaterial transmission line with the Class-E power amplifier tuning capability. The CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Also, the proposed power amplifier has been realized by using the CRLH structure in the output matching network for better efficiency. Operating frequencies are chosen at 13.56 MHz in this work. The measured results show that the output power of 39.83 dBm and the gain of 11.83dB was obtained. At this point, we have obtained the power-added efficiency (PAE) of 73 % at operation frequency.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.47-51
• /
• 2014

In this paper, unit cell and arrayed cover for improving the transfer efficiency of resonant wireless power transfer system is proposed. We used the characteristic of zero refractive index for focusing a magnetic field between the transmitting resonator and receiving resonator. For zero refractive index, we designed the unit cell structure that have a negative value of effective permeability. The size of proposed unit cell based on metamaterial structure is $70mm{\times}70mm{\times}3.2mm$, operating frequency is 13.56 MHz. And, the size of arrayed cover is $400mm{\times}400mm{\times}3.2mm$, is consists of 2-layers. The transfer efficiency of the proposed wireless power transfer system are 94.8 %, 93.2 %, 91.4 %, 90.8 % at 100 mm, 200 mm, 300 mm and 400 mm (distance between transmitting and receiving resonator), respectively. And proposed WPT system has a transfer efficiency high than 90 % over the overall distances.

• The Journal of Information Systems
• /
• v.15 no.3
• /
• pp.187-211
• /
• 2006

As port competitiveness is becoming more important in the global market environment RFID (Radio Frequency Identification) Is also becoming a crucial enabler In implement efficient visible, secure and productive ports. However there Is a lack of practical validated RFID technology acceptance cases in the port logistics industry until now, even though various related projects have been undertaken. In this study, we applied 13.56MHz passive RFID readers, tags, and their applications into existing bar-code based gate systems to improve the port logistics process, and we analyzed results of a pilot test in economic and non-economic perspectives. The main purpose of this study is to develop the RFID based automatic gate passing system in container terminals, and is to validate its economic and non-economic feasibility. In order to accomplish the purpose of this study, first, we examined previous researches on RFID technology acceptance in the port logistics industry, second, we Identified and analyzed the business process of existing gate systems in container terminals, third, we build RFID gate systems with 13.56Mhz tags, readers, and its middle-ware, finally we tested the system and its performance. The results were successful and showed the feasibility of the system in real container terminal gates. Economic and non-economic contribution was confirmed. Although the system has technological limitations with short range passive type, we clearly identified its potential capability and its economic validity in the field, which are the implications of this study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.402-407
• /
• 2013

In this paper, we consider an interference scenario and interference simulation method of intra-wireless vessel communications using SEAMCAT (Spectrum Engineering Advanced Monte-Carlo Analysis) simulator. The interference between electromagnetic equipment and low power radio apparatus can deteriorate a stability of vessel system and it is necessary to analyze the interference probability between radio devices. The proposed simulation method in the 13.56MHz ISM frequency band shows that the interference effect can be minimized when the distance between the devices is greater than 4.7m and 2.7m in case that the victim receiver (VR) are RFID and remote control(RC) toy, respectively. The proposed interference scenario and simulation method are expected to be helpful in the interference probability analysis and regulation policy in the ISM frequency band.

• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.40-46
• /
• 2011

In this paper, we introduce a hybrid RFID reader to recognize the pets. There is no the RFID reader to recognize a different types of frequency simultaneously. The RFID reader with 134.2 KHz has disadvantages with limited recognition radius and direction. The developed reader is dual-frequency RFID reader (134.2 KHz, 13.56 MHz) that is capable of identifying the pets with a different types of tags. The prototype model in the field test shows that the recognition coverage increases compared to the imported reader.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.68-75
• /
• 2007

A single chip NFC transceiver supporting not only NFC active and passive mode but also 13.56MHz RFID reader and tag mode was designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply which has dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of initiator antenna. The analog front end circuit of the proposed NFC transceiver consists of a transmitter and receiver of reader/writer block supporting NFC initiator or RFID reader mode, and a tag circuit for target of passive NFC mode or RFID tag mode. The maximum baud rate of the proposed NFC device is 212kbps by using UART serial interface. The chip has been designed and fabricated using a Magnachip's $0.35{\mu}m$ double poly 4-metal CMOS process, and the effective area of the chip is 2200um by 3600um.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.77-83
• /
• 2011

In this paper, we present the design procedure of the synchronizer and the demodulator of a 13.56MHz RFID PJM tag, which was standardized in ISO 18000-3 mode 3. We optimize the algorithms in order to minimize the number of registers and implement them based on international standard. The designed module is simulated by Modelsim and FPGA. The synchronizer is composed of 3 correlators that is implemented by 1,024(16bit ${\times}$ 64cycle) registers. The demodulator is composed of 2 correlators that is implemented by 128(2bit ${\times}$ 64cycle) registers. The simulation performed with the demodulator integrated with the synchronizer shows that it works at about 87% success rate with the test data of SNR -2dB and 100% with those of SNR 4dB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.519-521
• /
• 2011

NFC is enable communication between wireless davice within a distance of 10cm, one type of non-contanct short-range wireless communicaton using 13.56MHz frequency band. This is one type of RFID technology which include file transfer, contactless payment and RFID. NFC technology is standardized in 2003 already, it received much attention recently because NFC is announced full support in Android 2.3. And as APPLE is announced that have plan to monunt in iphone 5,mobile payment system is expected to change. Already SAMSUNG is launched NEXUS S mounted NFC chip and announced NFC chip will be mount GALAXY S2 LG Electronics is statemented NFC chip will be mount on smart phone that will realese this year. In this study, will announce about analysis for NFC technology and recently trend and used case.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2569-2574
• /
• 2013

In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In STAC protocol, the reader uses the tag number estimation scheme to determine the number of slots for the next reply round. If errors occur in the estimated number of tags, the identification performances will be degraded due to a lot of collision or idle slots. Therefore, in this paper, we propose an ERPB algorithm that the reader cancels the reply round when it experiences a series of collision or idle slots during the current round. The transmission probability control for the tag is also applied to the proposed algorithm. Through simulations, it is demonstrated that the collision rate for the proposed scheme is about 39% lower than STAC protocol. Therefore, the proposed scheme can achieve faster tag identification time compared with STAC protocol due to the low collision rate.

• Convergence Security Journal
• /
• v.14 no.7
• /
• pp.91-99
• /
• 2014

NFC(Near Field Communication) is a wireless data exchange technology in 13.56MHz frequency band between devices. The NFC Forum defines the NDEF(NFC Data Exchange Format) exchanging data format between NFC devices and NFC Tags, the NFC RTD(Record Type Definition) defining the record types in the NDEF messages, the Smart Poster RTD in order to replace current paper posters and the Signature RTD to ensure the authenticity and integrity for NDEF records. But the previous smart poster authentication scheme have the weaknesses of using the PKI(Public Key Infrastructure) with certificates to verify the public key for the smart poster authentication and requiring the additional storage capacity of NFC tags for the authentication path. Therefore in this paper we propose a smart poster authentication scheme and implementation based on the authentication URL, a digital signature and a public key without the PKI and certificates for the smart poster authentication.