• Journal of Acupuncture Research
• /
• v.19 no.2
• /
• pp.51-64
• /
• 2002

We have compared(using the same series of experimental tissue samples) the levels of proteolytic enzyme activities and free radical-induced protein damage in synovial fluid from RA and CPH cases. Many protease types showed significantly increased (typically by a factor of approximately 2-3-fold) activity in RA, compared to normal rats. However, CPH significantly reduced the cytoplasmic enzyme activities of arginyl aminopeptidase, leucyl aminopeptidase, pyroglutamyl aminopeptidase, tripeptidyl aminopeptidase, and proline endopeptidase to almost about 1/10 each. For the Iysosomal proteases, synovial fluid samples from RA rats, CPH significantly reduced the enzyme activities of cathepsin B, dipeptidyl aminopeptidase I and dipeptidyl aminopeptidase II. In extracellular matrix degrading(collagenase, tissue elastase) and leukocyte as sociated proteases (leukocyte elastase, cathepsin G), CPH decreased these enzyme activities of collagenase, tissue elastase and leukocyte associated elastase in RA. In cytoplasmic and lysosomal protease activities in plasma from RA. CPH and normal plasma samples were not significantly different, suggesting that altered activity of plasma proteases (particularly those enzymes putatively involved in the immune response) is not a contributory factor in the pathogenesis of RA. In addition, the level of free radical induced damage to synovial fluid proteins was approximately twice that in RA, compared with CPH. CPH significantly decreased the level of ROS induced oxidative damage to synovial fluid proteins (quantified as protein carbonyl derivative). Therefore we conclude that both proteolytic enzymes and free radicals are likely to be of equal potential importance as damaging agents in the pathogenesis of inflammatory joint disease, and that the design of novel therapeutic strategies for patients with the latter disorder should include both protease inhibitory and free radical scavenging elements. In addition, the protease inhibitory element should be designed to inhibit the action of a broad range of protease mechanistic types (i.e. cysteine-, metallo- and serine- proteinases and peptidases). However, increased protein damage induced by ROS could not be rationalised in terms of compromised antioxidant total capacity, since the latter was not significantly altered in RA synovial fluid or plasma compared with CPH.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.753-768
• /
• 1995

For accurate impression taking of dental patient and esthetic denture treatment of ednetulous patient, measuring between intraoral anatomic landmarks is useful.In this study the subjects selected at a random were two-jundred forty persons with a mean age 22.5(range 21-24) and were taken impression of by irreversible hydrocolloid impression material(Alginate). On the study model made by dental stone, each individual tray was made and final impresion was taken by border moilding. On final model measurings were performed with 3-dimensional measuring device and the values were analyzed by t-test The results is following : ABOUT THE MEASURED VALUES. 1. The width between maxillary right and left canine cusp tip was average 36.44mm(s.d. 2.48), man 36.67mm, woman 35.83mm(p<0.05). 2. The width between labial height of contour of maxillary right and left canine was average 40.08mm(s.d. 2.42), man 40.29mm, woman 39.52mm(p<0.05). 3. The width between mesio-lingual cusps of maxillary first molar was average 43.14mm(s.d. 3.33), man 43.56mm, woman 42.05mm(p<0.05). 4. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary first molar was average 64.89mm(s.d. 3.88), man 65.58mm, woman 62.92mm(p<0.05). 5. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary second molar was average 68.58mm(s.d. 3.91), man 69.29mm, woman 66.30mm (p<0.05). 6. The width between right and left hamular notch was average 49.80mm(s.d. 3.96), man 50.70mm, woman 48.20mm(p<0.05). 7. The length from labial heigth of contour of maxillary central incisor to center of incisive papilla was average 9.52mm(s.d. 1.18), man 9.46mm, woman 9.63mm(p>0.05). 8. The length from labial heigth of contour of maxillary central incisor to palatine fovea was average 53.27mm(s.d. 2.93), man 53.93mm, woman 52.08mm(p<0.05). 9. The center of incisive papilla ws located posterior to intercanine line at 0.40mm(s.d. 1.16), man 0.51mm, woman 0.11mm(p<0.05). 10. The height from incisal edge of maxillary central incisor to the labial vestibule was average 21.84mm(s.d. 1.38), man 22.01mm, woman 21.00mm(p<0.05). 11. The height from mesiolingual cusp of maxillary first molar to buccalvestible was average 17.45mm(s.d. 1.42), man 17.56mm, woman 17.08mm(p>0.05). 12. The height from hamular notch to standard occlusal plane was average 6.84mm(s.d. 1.06), man 6.91mm, woman 6.70mm(p>0.05). 13. The height from the deepest point of palatal vault to standard occlsalplane was average 19.95 mm(s.d. 2.03), man 20.19mm, woman 19.12mm(p<0.05). ABOUT THE ARCH FORM 1. The arch form was able to classify into four typr by the rate of the measured values. Each arch form distribution was that the 1 group had 32.46% the 2 group 2.19%, the 3 group 52.83%, the 4 group 12.72%. The sexual composition was that in 1 group man had 73.5%, woman 26.5%, in 2 group man had 40.0%, woman 60.0%, in 3 group man had 83.3%, woman 16.7%, and in 4 group man had 55.17%, woman 44.83%. 2. When canine cusp tip was marked as point O, the intersection point between labial height of contour of maxillary central incisor and intermaxillary suture as point A, height of contour of maxillary second molar buccal alveolar ridge as B point, ${\angle}$AOB was measured $133.8^{\circ}$for the 1 group, $133.0^{\circ}$for the 2 group, $132.3^{\circ}$for the 3 group, $128.9^{\circ}$for the 4 group.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.47-55
• /
• 2018

Talc, hydrous magnesium phyllosilicate, is one of the most popular industrial minerals due to their chemical stability and adsorptivity. While micro-sized talc has long been used as a filler and coating, nano-sized talc recently is attracting attention as additives for improving the stability of nanocomposites. In this study, we produced the nano-sized talc powder by mechanical method using high energy ball mill and investigated the changes in particle size and crystallinity with increasing milling time up to 720 minutes. X-ray diffraction results show that the peak width of talc gradually as the milling proceeded, and after 720 minutes of pulverization, the talc showed an amorphous-like X-ray diffraction pattern. Lase diffraction particle size analysis presents that particle size of talc which was ${\sim}12{\mu}m$ decreased to ${\sim}0.45{\mu}m$ as the milling progressed, but no significant reduction of particle size was observed even after grinding for 120 minutes or more. BET specific surface area, however, steadily increases up to the milling time of 720 minutes, indicating that the particle size and morphology change steadily as the milling progressed. Scanning electron microscope and transmission electron microscope images shows that layered particles of about 100 to 300 nm was aggregated as micro-sized particles after pulverization for 720 minutes. As the grinding time increases, the particle size and morphology of talc continuously change, but the nano-sized talc particles form micro sized agglomerates. These results suggest that there is a critical size along the a, b axes in which the size of plates is reduced even though the grinding proceeds, and the reduction of plate thickness along the c axis leads the increase in specific surface area with further grinding. This study could enhance the understanding of the mechanism of the formation of nano-sized talc by mechanical grinding.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.320-326
• /
• 2012

This study was conducted to investigate the antibacterial and antioxidative activities of water and ethanol extracts from a mixture of roasted coffee and red ginseng. The antibacterial effects of each extract were determined by the classical paper disc method. A water extract of mixture samples inhibited growth of all strains, but antibacterial effects were mostly weakened. Ethanol extracts showed stronger antibacterial effects than water extracts in all strains except Gram negative Escherichia coli and the fungi strain Candida albicans. Also, the antibacterial effect of the Bacillus cereus strain appeared in all samples, and the ES2 sample formed a clear zone of 19 and 20 mm against Pseudomonas aeruginosa and S. Typhimurium respectively (MIC=0.25 and 0.125 mg/mL). Determinations of free radical elimination for the different mixture extracts using 1,1-diphenyl-2-picrylhydrazyl (DPPH) were compared with ascorbic acid and butylated hyderoxytoluene as positive controls. The water and ethanol extracts of mixture samples (100 ${\mu}g/mL$) showed 55.38~60.01% and 59.37~70.50% DPPH scavenging activities, respectively. DPPH scavenging activities of all mixture samples were slightly higher than roasted coffee and red ginseng samples. However, DPPH scavenging activity decreased when red ginseng extract composed more than 70% of the total extract. The total polyphenol in the mixture samples measured by the Folin-Denis method revealed the highest level of polyphenol content in ethanol extract of sample 3, whereas polyphenol content differed with different mixture ratios, ranging from 105.16~119.79 mg/g in ethanol extract. In the water extract, the polyphenol content was greatest with water extract of sample 1, whereas in other samples the content varied from 93.75~109.18 mg/g.

• Korean Journal of Cognitive Science
• /
• v.13 no.3
• /
• pp.1-10
• /
• 2002

This study was performed to analyze the physical attributes of the faces and affective words on the fares. For analyzing physical attributes inside of a face, 36 facial features were selected and almost of them were the lengths or distance values. For analyzing facial contour 14 points were selected and the lengths from nose-end to them were measured. The values of these features except ratio values normalized by facial vortical length or facial horizontal length because the face size of each person is different. The principal component analysis (PCA) was performed and four major factors were extracted: 'facial contour' component, 'vortical length of eye' component, 'facial width' component, 'eyebrow region' component. We supposed the five-dimensional imaginary space of faces using factor scores of PCA, and selected representative faces evenly in this space. On the other hand, the affective words on faces were collected from magazines and through surveys. The factor analysis and multidimensional scaling method were performed and two orthogonal dimensions for the affections on faces were suggested: babyish-mature and sharp-soft.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.

• Clinical and Experimental Pediatrics
• /
• v.53 no.4
• /
• pp.519-524
• /
• 2010

Purpose : To determine the efficacy of the N-terminal fragment of B-type natriuretic peptide (NT-proBNP) as a useful diagnostic method in children with incomplete Kawasaki disease (KD). Methods : Ninety-six patients who were diagnosed as having KD between January 2008 and June 2009 were enrolled in the study. American Heart Association recommendations for diagnosis were used, and patients were divided into the complete KD and incomplete KD groups. Blood tests including NT-proBNP were performed on admission day. Nineteen patients who had other febrile diseases other than KD were enrolled as control. Results : Thirty-three patients (34%) had incomplete KD. Change in the lips and oral cavity and conjunctivitis were the most common clinical features, but their frequency was lower than complete KD (76% vs 98%, 76% vs 90%). Patients with incomplete KD exhibited significantly higher NT-proBNP level than that of control ($1,407.7{\pm}1633.5pg/mL$ vs $126.2{\pm}135.5pg/mL$, $P$<0.001). An NT-proBNP cutoff value of 158 pg/mL provided a sensitivity of 81% and a specificity of 74% for diagnosis of incomplete KD. Conclusion : NT-proBNP assay can be clinically useful for the diagnosis of incomplete KD, if the patient has persistent fever, change in the lips and oral cavity, and conjunctivitis, and if the patient with those symptoms is suspected to have incomplete KD.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.557-566
• /
• 2005

In preparation of steamed foam-cakes, effects of whipping time, amount of wheat flour, and amounts of emulsifier on physical properties of the steamed foam cakes were investigated using RSM (response surface methodology). The three independent variables selected for the RSM experiment were whipping time $(X_1)$, amount of wheat flour $(X_2)$, and amounts of wheat flour $(X_2)$, and concentration of emulsifier $(X_3)$ were set for single-stage mixing, respectively. A rotatable central composite design was used for treatment arrangement. The responses from the product for loaf volume, color values and textural properties were analysed. In the analysis of variance for the foam cakes prepared by single-stage method, significant interactions were observed between independent variables (experimental factors) and physical property like loaf volume (p<0.05); textural properties like hardness, gumminess, and chewiness (p<0.05). Among independent variables, concentration of emulsifier had the most effects on physical properties while whipping time. The ordinary points in surface response showed maximal points with physical property like colorimetric b value while other properties revealed saddle points. The 3-dimensional response surface graphs of the predicted regression models displayed decreasing loaf volumes with increasing whipping times and emulsifier concentrations beyond optimum levels. The optimum conditions for best loaf volume and textural property (hardness, gummimess and chewiness) of the products selected by extracting intersectional areas of the contour maps that commonly overlapped all characteristics were; $11\~13$ min whipping time, $470\~486\;g$ amount of wheat flour, and $19\~20\;g$ emulsifier concentration, in case of single-stage method. The median values extracted from the RSM experimental results for optimum manufacturing conditions for single-stage method, i.e., 12 min whipping time, 478 g amount of wheat flour, and 20 g emulsifier concentration were empirically proven to fit the predicted levels of physical properties from the final foam cakes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.1153-1163
• /
• 2003

The purpose of this study was to evaluate the patients' satisfaction with the quality of hospital food service in Busan area. For the purpose, questionnaires were distributed to 271 hospitalized patients in 4 hospitals (three hospitals for self-operated foodservice, one for contracted foodservice) within 130 beds. The average scores were -0.99/5.00 for quality satisfaction of meal characteristics, -0.68/5.00 for service characteristics, and -0.37/5.00 for nutrition characteristics. The items of low scores in quality satisfaction were treatment of complaints, nutrition of meals, provision of nutritional information, the seasoning of the meals, selective menu, and sanitation of the meals. At the expectation and perception grid, high expectation and high perception items were cleanliness of employees' clothes, cleanliness of dish, employees' courtesy, exactness of meal time, and sanitation of the meals. High expectation and low perception items were treatment of complaints and nutrition. The patients with little appetite showed significantly (p<0.01) lower average scores in meal, service, and nutrition characteristics than those with much appetite. The self-operated foodservice operation had significantly (p<0.01) higher average scores in meal, service, and nutrition characteristics than those of the contracted foodservice operation. The patients hoped to improve the taste of cooked rice and side dish, quantity of the side dish, variety of menu, and sanitation of the meals.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.4
• /
• pp.10-16
• /
• 1986

To evaluate the nutritive value, 13 Wild vegetables which commonly used for side dish were analyzed. Their Moisture are lower than that of other vegetables. Crude Protein content of thess Wild vegetables is more than 2% , which is higher than that of other vegetables and these tendencies were also shown in the content of Crude Ash. The content of Crude Fat and of Crude Fiber are similar in the Wild vegetables, but Crude Fiber of C. lanceolata TRAUTV is three times higher than that of other Wild vegetables. In all Wild vegetables, the K content of Mineral is similar, but that of C. lanceolata TRAUTV is very low. The content of Ca and P are quite different among Wild vegetables. The content of Mg is also similar each other, about 16mg%, but that of P. agwilinum var. latiusculum UNDERW, A. elata SEEM, A. altissima SWINGLE, root of A. triphylla (Thunb.)A.DC., H.Thunbergii BAK. is 8.99, 7.69, 4.30, 4.13 and 1.92mg% respectively. Total Amino acids were contained in order of A. elata; 3072.4mg%>C. lanceolata TRAUTV; 2709.4mg%>P. agwilinum var. latiusculum UNDERW, A. altissimB SWTNGLE, A. Japonica KOIDZ, S.palmata MAX. : about 2350mg%>L.Jaluensis KOM., P.Caponicus MAX., leaf of A. triphylla(Thunb.)A.DC., C.Japonicum var. ussuriense, H.plantaginea ASCHERS; about 1400mg%>H.Thunbergii BAK., A.scaber THUNB, root of A. triphylla(Thunb.) A.DC. ; about 600mg%, Asp.A.A. and Glu.A.A. content, 46% of Total A.A. is higher than other Amino acids and the content of Arg. A.A. in C.lanceolata TRAUTV which is higher than that of other Amino acids is 6 times highly than that of other Wild vegetables. A. altissima SWINGLE, H.plantaginea ASCHERS, A.Japonica KOIDZ contain Vitamin C a little avobe, 45.9mg%, 36.8mg%, 30.2mg% respectively. Glucoslde content of L.Jaluensis KOM., C.lanceolata TRAUTV which are 4.1%, 3.5%, were highest of all ana that of P.Caponicus MAX., P.agwilinum var. latiusculum UNDERW, 2.2%, 2.0% is in the second, which seems to be the cause of bitter taste.