• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.356-362
• /
• 1999

DECT(Digital Enhanced Cordless Telecommunications) is the communication protocol and the pico-cellular network that provides a PABX with mobile services on the local area within its cell radius of about 100 to 200m. Compared with GSM, DECT provides low-cost communication services based on the PSTN and it is an ideal supplementary method for the type of in-building mobile communication. In this paper we presented the implementation methods and techniques of the DECT data link communication layer that provided reliable communication services to the upper network layer by performing the functions of link controls, error controls, sequence controls, and flow controls.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.129-139
• /
• 1999

DECT(Digital Enhanced Cordless Telecommunications) is the communication protocol and the pico-cellular network that provides a PABX with mobile services on the local area within its cell radius of about 100 to 200m. Compared with GSM, DECT provides low-cost communication services based on the PSTN and it is an ideal supplementary method for the type of in-building mobile communication. In order to implement the data link communication layer of the DECT system, in this paper we analyzed and designed the structures and functions of it that provided reliable communication and real-time services to the upper network layer by performing the functions of link controls, error controls, sequence controls, and flow controls.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.360-364
• /
• 2000

We demonstrate self-starting passIve mode locking of a Cr:LiSAF laser, using a SCIDlconduclor Saturable Absorber Mirror (SESAM), Two high-power red semiconductor lasers (Coherent S-67-500C-100-H) of wavelength 667 nm and maximum power of 500 mW were used as pump lasers, The cavity has 10 cm radius-ai-curvature folding minors, two SF 10 prisms, a 99% reflectivity output coupler and a SESAM at dIe focus of a 10 cm radIus-at-curvature mirror. We used the laser crystal in BrewsterBrewster shape with 1 5% $Cr^{+3}$ ion concentration and the length of 6 mm, An X-shaped resonator was used to compensate the astigmatism induced by tile crystal. The structure of the SESAM cOllSists of 30 pmr of $AlAs/Al_{0.15}Ga_{0.85}As$ layer, wi1l1 a 10 nm GaAs quantum well situated in the topmost layer Output spectra were centeled at 833 nm, with 4 nm spectral bandwidth and pulse width was measured to be 220 fs, Output power of 3 mW is obtained at a pump power of 800 mW. 00 mW.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.3
• /
• pp.371-375
• /
• 2007

The concentrations of conjugated linoleic acid (CLA) in twelve Korean mothers' milk samples collected in October 2006 and four infant formula samples produced by Korean manufacturers were determined. CLA detected from both mothers' milk and infant formula samples was only cis-9, trans-11 CLA isomer. The amount of cis-9, trans-11 CLA in Korean mothers' milk (100 mL) ranged from 4.32 to 10.12 mg ($6.27{\pm}0.28\;mg$). Infant formula (13 g), which is the manufacturers' recommended amount to make up 100 mL with water, contained cis-9, trans-11 CLA isomer in amounts ranging from 1.61 to 2.97 mg ($2.27{\pm}0.31\;mg$).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.34-39
• /
• 1999

Electron temperature and electron density were rreasured in a radio-frequency inductively coupled plasma (RFICP) using a Langmuir probe method. Measurerrent was conducted in an argon discharge for pressures from 10 mTorr to 40 mTorr and input rf rnwer from 100 W to 600 W. Spatial distribution electroo temperature and electron density were rreasured for discharge with satre aspect ratio (R/L=2). Electron temperature and electron density were discovered depending on both pressure and power. Electron density was increased with iocreasing input power, but saturated at 450 W. Electron density was iocreased with iocreasing pressure. Radial distribution of the electron density was peaked at the rnsition which was a little rmved from center toward quartz window. Normal distribution of the electron density was peaked in the center between quartz plate and substrate. The above results could contribute to understand the Mechanism of Radio-Frequency Inductively Discharge Plasma.Plasma.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.181-189
• /
• 2001

This paper describes the positioning accuracy of GPS moduls (KGP9800C, KiRyung) which need to record the operating position of fishing boat as realtime processing in order to develope auto recording system of fishing boat's operating information, and then it's positioning accuracy for DGPS receiver (MGP-100D, Shin-A) and DGPS beacon (GP-36, Furuno) were analyzed. Futhermore, it was examined the positioning error of the GPS module with processing algorithm to minimize the effect of the signal fluctuations. The results indicate that the positioning error is able to decrease 5m as 2drms, and such improvement of positioning performance for GPS module (KGP9800C) can be provide the basic design data in the development of the auto recording system of fishing boat's operating information.

• Journal of radiological science and technology
• /
• v.34 no.1
• /
• pp.51-58
• /
• 2011

The aim of the study is to analyze the dose delivery error depending on the depth variation according to target positions and arc trajectories by comparing the simulated treatment planning with the actual dose delivery in conformal arc therapy. We simulated the conformal arc treatment planning with the three target positions (center, 2.5 cm, and 5 cm in the phantom). For the experiments, IMRT body phantom (I’mRT Phantom, Wellhofer Dosimetry, Germany) was used for treatment planning with CT (Computed Tomography, Light speed 16, GE, USA). The simulated treatment plans were established by three different target positions using treatment planning system (Eclipse, ver. 6.5, VMS, Palo Alto, USA). The radiochromic film (Gafchromic EBT2, ISP, Wayne, USA) and dose analysis software (OmniPro-IMRT, ver. 1.4, Wellhofer Dosimetry, Germany) were used for the measurement of the planned arc delivery using 6 MV photon beam from linear accelerator (CL21EX, VMS, Palo Alto, USA). Gamma index (DD: 3%, DTA: 2 mm) histogram and dose profile were evaluated for a quantitative analysis. The dose distributions surrounded by targets were also compared with each plans and measurements by conformity index (CI), and homogeneity index (HI). The area covered by 100% isodose line was compared to the whole target area. The results for the 5 cm-shifted target plan show that 23.8%, 35.6%, and 37% for multiple conformal arc therapy (MCAT), single conformal arc therapy (SCAT), and multiple static beam therapy, respectively. In the 2.5 cm-shifted target plan, it was shown that 61%, 21.5%, and 14.2%, while in case of center-located target, 70.5%, 14.1%, and 36.3% for MCAT, SCAT, and multiple static beam therapy, respectively. The values were resulted by most superior in the MCAT, except the case of the 5 cm-shifted target. In the analysis of gamma index histogram, it was resulted of 37.1, 27.3, 29.2 in the SCAT, while 9.2, 8.4, 10.3 in the MCAT, for the target positions of center, shifted 2.5 cm and 5 cm, respectively. The fail proportions of the SCAT were 2.8 to 4 times as compared to those of the MCAT. In conclusion, dose delivery error could be occurred depending on the target positions and arc trajectories. Hence, if the target were located in the biased position, the accurate dose delivery could be performed through the optimization of depth according to arc trajectory.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.627-632
• /
• 1997

FLECHT-SEASET 실험을 이용하여 냉각재상실사고시 Reflood에 대한 TRAC-PF1 전산코드의 예측 능력을 평가하였다. FLECHT-SEASET 실험 장치는 3.657m(12 ft) 높이 161개 전열 봉으로 이루어 져 있으며, 다양한 재관수율, 계통압력, 초기 피복재온도, 재관수온도 노심내 반경방향 출력분포 둥의 조건에 따라 수행된 실험이다. TRAC-PF1은 비균질 비평형 이상유동 열수력(Nonhomogeneous Non-equilibrium Two-Fluid Hydrodynamic)모델을 사용하고 원자로 압력용기는 3차원으로 모델할 수 있는 최적전산코드로서, 이 평가 계산에는 HP Version이 사용되었다. 본 연구에서는 재관수율 변화에 따라 달라지는 연료봉 최대 피복재온도와 Quench 시간에 대한 TRAC-PF1 전산코드의 예측 능력을 중점적으로 평가하였다. 계산 결과 TRAC-PF1은 최대 피복재온도는 약 20-100$^{\circ}$K 낮게, Quench 시간은 실험치와 비교하여 약 40-150초 정도 늦게 예측하는 것으로 나타났는데, 재관수율이 낮을수록 최대피복재 온도는 낮게, Quench 시간은 늦게 예측하는 경향을 보이고 있다. 또한 재관수율이 3 in/sec 이상에서 노심 상부가 일찍 Quenching 되는 것으로 계산되는데, 이는 노심상부 열전달 Regime의 부적절한 계산이 원인으로 보인다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.753-757
• /
• 2005

Wireless LAN was developed by alternative of LAN and because establishment was easy, have used into special field and special expenditure. Recently, Standard and a technology developed by leaps and bounds. Present is used into purpose of the Building to Building or wide connection etc. and relay of the high speed Internet and usage of picture communication that require multimedia band width. Specially, campus wireless LAM is thought that must secure radius $100\;\~\;200\;m$ dimension at the minimum 10Mbps speed as Internet transit trunk. But, there is difference as degressive here. In this paper, wireless LAN measured for effectiveness proof as Internet transit trunk in actuality utilization environment. Proved that should compose IEEE802.11b as AP more than minimum 3 when compose network to base as measuring result. Hereafter, there is the purpose that achieve performance evaluation of wireless UM in marine environment.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.63-74
• /
• 2006

It's essential to meet the expectations of drivers through reasonable road design, which makes the drivers to recognize the conditions of road sufficiently. In this case, we could say that because the roads are consistently designed, drivers can make a safe and comfortable drive. There are so many studies about the alignment design consistency methods which are previously mentioned. In this study, Firstly we categorize the studies which are concerned with the estimation of the alignment design consistency methods and then apply the method which fits for the actual condition into the practice. And we'll make a realistic method by using the data which aye collected from the National Road. The developed model in this study is the predicting model including speed($V_t$) as the variable on the upper stream 100m of the curve. This model was developed which divided to two cases in the all directions of two lanes; One case is the $R{\leq}200m$ and another case is the R>200m. In the section of the $R{\leq}200m$, this case was influenced on the road alignment(R) and($V_t$) and another section was found that is affected to the speed($V_t$) on the upper stream loom rather than the effect of road alignment(R). In the case of all directions of four lanes, however, this study is predicted divided to two sections on the 400m of R, these section have more influenced to($V_t$) than the road alignment factors. This result of the four lanes was represented to different result with the two lanes. This study will further need development of the predicting model with the higher confidence through collecting data with more the exact data, the various road alignment data and speed of the several sections on the upper stream on the curve.