• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.7-13
• /
• 2010

We report a hybrid DPSSL with a pulse parameter variable LD seed, all-fiberized polarization-maintained pulsed Yb-doped fiber preamplifier chains, and a bulk Nd:$YVO_4$ power amplifier. Pulse parameter of LD seed was controlled by direct current modulation. The hybrid DPSSL generates 1064 nm laser pulses with an average power of 40W, a pulse duration of 20-40ns, and a repetition rate of 100-500kHz.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.37-37
• /
• 2002

반도체 소자의 집적도는 지난 수십년간 끊임없이 증가해 왔다. 이러한 추세가 계속 된다면 앞으로 수년 이내에 100 nm 이하의 선폭을 갖는 집적회로가 출현하게 될 것이다. 수-수십나노 미터 크기의 구조가 이와같이 제품에 실제로 응용되려면 수 나노미터의 길이에 대한 표준 측정 기술이 확보되어야 하고 이 측정 기술을 서로 비교 평가 할 수 있는 표준 물질이 필요하다. 본 연구에서는 표준 물질로 사용될 수 있는 1차원 나노 구조를 제작하였다. 제작된 1차원 나노 구조는 선폭이 90 nm인 네모난 산과 네모난 우물들이 반복적으로 나타나는 형태를 갖는다. 나노 구조가 제작된 총영역은 0.1 ㎜ × 0.1 ㎜의 정사각형 영역이다. 1차원 나노 구조는 전자빔 석판 기술을 이용하여 제작하였다. 균일한 구조를 만들기 위해 전자 빔의 도즈량 최적화, 전자 빔의 비대칭성의 영향 최소화, 에칭 공정 변수 최적화 등 공정 조건을 선별하는 연구를 하였다. 본 연구에서 제작된 1차원 나노구조는 전자현미경의 배율 보정, Scanning Probe Microscope의 이미지 보정 등에 사용될 수 있을 것이다.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.92-100
• /
• 2015

Electric Vehicle (EV) can be categorized by the driving method into in-wheel and in-line types. In-wheel type EV does not have transmission shaft, differential gear and other parts that are used in conventional cars, which simplifies and lightens the structure resulting in higher efficiency. In this paper, design method for in-wheel motor for automobiles using Parameter Map is proposed, and motor with continuous power of 5 kW is designed, built and its performance is verified. To decide the capacity of the in-wheel motor that meets the automobile's requirement, Vehicle Dynamic Simulation considering the total mass of vehicle, gear efficiency, effective radius of tire, slope ratio and others is performed. Through this step, the motor's capacity is decided and initial design to determine the motor shape and size is performed. Next, the motor parameters that meet the requirement is determined using parametric design that uses parametric map. After the motor parameters are decided using parametric map, optimal design to improve THD of back EMF, cogging torque, torque ripple and other factors is performed. The final design was built, and performance analysis and verification of the proposed method is conducted by performing load test.

• The KIPS Transactions:PartB
• /
• v.12B no.2 s.98
• /
• pp.123-130
• /
• 2005

In this paper, fingerprint identification algorithm using pixel direction factor in blocks is proposed to minimize false acceptance ratio and to apply security system. The proposed algorithm is that a fingerprint image is divided by 16 blocks, then feature parameters which have direct factors of $0^{\circ},\;45^{\circ},\;90^{\circ}\;and\;135^{\circ}$ is extracted for each block. Membership function of a reference fingerprint and an input fingerprint for the extracted parameters is calculated, then identification of two fingerprint is distinguished using fuzzy inference. False acceptance ratio is evaluated about different fingerprints of In kinds regardless of sex and shape which are obtained from adults, and false rejection ratio is evaluated about fingerprints which are obtained by adding fingerprints of 10 kinds on different fingerprints of 100 kinds. The experiment results is that false acceptance ratio is average $0.34\%$ about experiment of 4,950 times, and false rejection ratio is average $3.7\%$ about experiment of 1,000 times. The proposed algerian is excellent for recognition rate and security.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.67-79
• /
• 1997

We have designed the quasi optics of the dual channel receiver to observe the radio sources with 100GHz-band and 150GHz-band simultaneously. We introduced the general quasi optics and the relation between the Gaussian beam and thin lens approximation. We determined the parameters of the quasi optic components to match the beam waist at cassegrain focus with that of feed horn well.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.491-498
• /
• 2001

IN this Paper we propose an encryption algorithm for security in data communication. this algorithm acts encryption operation after the compression of data in order to reduce the transmission time and storage an encryption key is generated by using a parameter. as soon as key value is generated the parameter is transmitted and key is recreated every 26 times of parameter changing. the random number which is a constituent unit of encryption key is stored in a table the table is reorganized when the key is generated 40 times in order to intensity the security of encryption key. the encryption of data is made through the operation process of the generated key and sour data and the decryption performs the revers operation of encryption after getting decryption key by searching the transmitted parameter. as this algorithm is performed lastly it is possible to be used in practice.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1029-1042
• /
• 2021

As part of the next-generation Compact Advanced Satellite 500 (CAS500) project, CAS500-4 is scheduled to be launched in 2025 focusing on the remote sensing of agriculture and forestry. To obtain quantitative information on vegetation from satellite images, it is necessary to acquire surface reflectance through atmospheric correction. Thus, it is essential to develop an atmospheric correction method suitable for CAS500-4. Since the absorption and scattering characteristics in the atmosphere vary depending on the wavelength, it is needed to analyze the sensitivity of atmospheric correction parameters such as aerosol optical depth (AOD) and water vapor (WV) considering the wavelengths of CAS500-4. In addition, as CAS500-4 has only five channels (blue, green, red, red edge, and near-infrared), making it difficult to directly calculate key parameters for atmospheric correction, external parameter data should be used. Therefore, thisstudy performed a sensitivity analysis of the key parameters (AOD, WV, and O₃) using the simulated images based on Sentinel-2 satellite data, which has similar wavelength specifications to CAS500-4, and examined the possibility of using the products of GEO-KOMPSAT-2A (GK2A) as atmospheric parameters. The sensitivity analysisshowed that AOD wasthe most important parameter with greater sensitivity in visible channels than in the near-infrared region. In particular, since AOD change of 20% causes about a 100% error rate in the blue channel surface reflectance in forests, a highly reliable AOD is needed to obtain accurate surface reflectance. The atmospherically corrected surface reflectance based on the GK2A AOD and WV was compared with the Sentinel-2 L2A reflectance data through the separability index of the known land cover pixels. The result showed that two corrected surface reflectance had similar Seperability index (SI) values, the atmospheric corrected surface reflectance based on the GK2A AOD showed higher SI than the Sentinel-2 L2A reflectance data in short-wavelength channels. Thus, it is judged that the parameters provided by GK2A can be fully utilized for atmospheric correction of the CAS500-4. The research findings will provide a basis for atmospheric correction of the CAS500-4 in the future.

• Journal of the Korean Society of Radiology
• /
• v.9 no.4
• /
• pp.227-234
• /
• 2015

In this paper, we studied possibility about application for CAD on diffuse liver disease through pixel texture analysis parameters(average gray level, skewness, entropy) which based statistical property brightness histogram and image analysis using brightness difference liver and kidney parenchyma. The experiment was set by ROI ($50{\times}50$ pixels) on liver ultrasound images.(non specific, fatty liver, liver cirrhosis) then, evaluated disease recognition rates using 4 types pixel texture analysis parameters and brightness gap liver and kidney parenchyma. As a results, disease recognition rates which contained average brightness, skewness, uniformity, entropy was scored 100%~96%, they were high. In brightness gap between liver and kidney parenchyma, non specific was $-1.129{\pm}12.410$ fatty liver was $33.182{\pm}11.826$, these were shown significantly difference, but liver cirrhosis was $-1.668{\pm}10.081$, that was somewhat small difference with non specific case. Consequently, pixel texture analysis parameter which scored high disease recognition rates and CAD which used brightness difference of parenchyma are very useful for detecting diffuse liver disease as well as these are possible to use clinical technique and minimize reading miss. Also, it helps to suggest correct diagnose and treatment.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.3
• /
• pp.13-20
• /
• 2011

In this paper, we proposed a system to raise gas safety management by using the wireless communication module and intelligent gas safety appliances. Our designed systems configure a micom-gas meter, an automatic extinguisher, sensors, and a wallpad. A micom-gas-meter monitors gas flow, gas pressure, and earthquake. An automatic fire extinguisher checks gas(combustible) leaks and temperature of $100^{\circ}C$ and $130^{\circ}C$. Sensors measure smoke and CO gas. In our novel system, a micom-gas meter cut off inner valve with warnings, an automatic fire extinguisher cut off middle valve and spray extinguishing materials, and sensors generate signals for smoke and CO when occurring gas risk. Gas safety appliances and sensors takes safety measures, and transmit those signal to a wallpad. The wallpad again transmit signal like events to a control server. Users can connect web pages for gas safety through B-ISDN and control and manage them. We hereby devised scenarios for gas safety and risk management, and demonstrated their effectiveness through experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.383-387
• /
• 2015

Bowel and rectal diseases are on the increase by irregular life and westernized eating habits of modern people, especially rectal cancer, which accounts for 50% of the entire colon cancer. For the initial rectal cancer, because there is no portion projecting on the surface, if not see inside the tissue with ultrasound, you make an errors that misdiagnosis as rectal abscess. However there is a need for more accurate diagnosis, because it is sometimes difficult to distinguish abscess from rectal cancer depending on staging, in spite of the ultrasonic diagnosis. Therefore, this study was performed quantitative analysis by using a computer algorithm for rectal cancer and abscess image. Each of 20 cases about normal, abscess and cancer by setting analysis region ($50{\times}50$ pixels) applies to GLCM algorithm and Autocorrelation, Max probability, Sum average, Sum variance in each image were analyzed by comparing the 4 single parameter. Consequently, The high lesion detection efficiency was presented 100% by the 3 parameter of Autocorrelation, Max probability, Sum variance and the parameter of Sum average presents 95% in cancer, more than 90% in abscess. Those parameters are valuable in distinction standard about normal, cancer and abscess in rectum. It is sufficient availability as a computer assisted diagnosis system depended on clinical using.