• 제목/요약/키워드: 10-Gb/s optical signal transmission

검색결과 34건 처리시간 0.023초

Cost-Effective Transition to 40 Gb/s Line Rate Using the Existing 10 Gb/s-Based DWDM Infrastructure

  • Lee, Sang-Soo;Cho, Hyun-Woo;Lim, Sang-Kyu;Lee, Dong-Soo;Yoon, Kyeong-Mo;Lee, Yong-Gi;Kim, Kwang-Joon;Ko, Je-Soo
    • ETRI Journal
    • /
    • 제30권2호
    • /
    • pp.261-267
    • /
    • 2008
  • In this paper, we propose and demonstrate a cost-effective technique to upgrade the capacity of dense wavelength division multiplexing (DWDM) networks to a 40 Gb/s line rate using the existing 10 Gb/s-based infrastructure. To accommodate 40 Gb/s over the link optimized for 10 Gb/s, we propose applying a combination of super-FEC, carrier-suppressed return-to-zero, and pre-emphasis to the 40 Gb/s transponder. The transmission of 40 Gb/s DWDM channels over existing 10 Gb/s line-rate long-haul DWDM links, including $40{\times}40$ Gb/s transmission over KT's standard single-mode fiber optimized for 10 Gb/s achieves successful results. The proposed upgrading technique allows the Q-value margin for a 40 Gb/s line rate to be compatible with that of 10 Gb/s.

  • PDF

2.5 Gb/s transmission of a spectrum-sliced incoherent hight source with 0.92 nm bandwidth over 80 km of dispersion-shifted fiber

  • Shin, Sang-Yung;Han, Jung-Hee;Lee, Jae-Seung
    • Journal of the Optical Society of Korea
    • /
    • 제2권1호
    • /
    • pp.22-25
    • /
    • 1998
  • We present a spectrum broadening technique to improve the signal-to-noise ratio of spectrum sliced incoherent light sources using the fiber four-wave mixing effect which occurs in a nonlinear loop mirror located at the receiver. The initial transmission channel bandwidth of 0.92 nm was increased to 1.62 nm in the nonlinear loop mirror at the optical receiver, which enhances the signal-to-noise ratio to a desired value. Using this technique, we have demonstrated the transmission of a 2.5 Gb/s NRZ signal with the 0.92 nm bandwidth through a 80 km dispersion-shifted fiber. The measured transmission penalty was less than 0.2 dB at $1{\imes}10^{-10}$ BER.

Pseudo Optical PAM-N Signal Using Externally Modulated Lasers

  • Huh, Joon Young;Lee, Joon Ki;Kang, Sae-Kyoung;Lee, Jyung Chan
    • ETRI Journal
    • /
    • 제37권6호
    • /
    • pp.1120-1128
    • /
    • 2015
  • We propose a pseudo optical N-level pulse-amplitude modulation (PO PAM-N) signal using a few externally-modulated lasers (EMLs) operating at different wavelengths, which is suitable for upgrading the transmission speed over an optical link of < 10 km single-mode fiber with low-cost components. To compare a PO PAM-N signal with that of a standard optical PAM-N signal, we perform experiments for evaluating the performance of a 51.56-Gb/s PO PAM-4 signal and standard 51.56-Gb/s optical PAM-4 signal. The receiver sensitivity (at $BER=10^{-5}$) of the PO PAM-4 signal is 1.5 dB better than the receiver sensitivity of a standard optical PAM-4 signal. We also investigate the feasibility of PO PAM-N (N = 4, 8, and 16) signals operating at 103.12 Gb/s, considering relative intensity noise, timing jitter, extinction ratio (ER) of EMLs, and dispersion. From the results, a PO PAM-8 signal performs better than PO PAM-4 and PO PAM-16 signals at 103.12 Gb/s. Finally, we suggest a timing control method to suppress the effect of dispersion in a PO PAM-N signal. We show that the tolerance to dispersion of a 103.12-Gb/s PO PAM-8 signal can be improved to ${\pm}40ps/nm$ by applying a proposed scheme.

마하 젠더 변조기로 생성된 CSRZ 펄스 기반의 200 Gb/s OTDM-PAM4 신호의 전송 (Transmission of 200-Gb/s 2-channel OTDM-PAM4 Signal Based on CSRZ Pulse Generated by Mach-Zehnder Modulator)

  • 배성현
    • 한국광학회지
    • /
    • 제34권4호
    • /
    • pp.151-156
    • /
    • 2023
  • 파장당 200 Gb/s급 신호를 전송하는 고속 근거리 광통신 시스템을 비용 효율적으로 구축하기 위한 방안으로서 캐리어 억제 펄스 기반의 2채널 광학적 시분할 다중화 시스템을 제안한다. 캐리어 억제 펄스는 널 바이어스가 인가된 마하 젠더 변조기로 생성되며, 이는 시분할 다중화 신호를 색분산에 강인하게 만든다. 송신부에서는 캐리어 억제 펄스를 둘로 분기하고, 각각을 100 Gb/s의 4레벨 진폭 변조 신호로 변조한 후, 광학적 시분할 다중화를 통해 200 Gb/s의 신호를 생성한다. 다중화된 광 신호는 광섬유로 전송된 후, 반도체 광 증폭기로 증폭되며, 한 개의 광 검출기로 검출된다. 증폭기에 의해 발생한 잡음은 광학 필터로 제거된다. 시분할 다중화 과정에서 발생하는 누화는 다중 입력-다중 출력 이퀄라이저로 보상한다. 본 연구에서는 200 Gb/s의 고속 신호를 40 ps/nm의 색분산을 갖는 광섬유로 전송하여도 3.8×10-3 이하의 비트 오율을 확보할 수 있음을 시뮬레이션으로 확인하였다.

10Gb/s 광신호의 320km 분산천이 광섬유 전송실험 (Transmission of 10 Gb/s optical signais over 320 km of a dispersion shifted fiber)

  • 이상수
    • 한국광학회지
    • /
    • 제10권1호
    • /
    • pp.64-67
    • /
    • 1999
  • 전송용 고아섬유로 320km의 분산천이 광섬유를 사용하여 10Gb/s 광링크를 구성하고 전송실험을 수행하였다. 광링크는 10Gb/s 광송수신기, 광전력 증폭기, 3개의 광전로 증폭치 증폭기 및 전송용로 구성되어Tdmaum 전송거리에 따른 비트 오율 특성에 대하여 조사하였다. 전송실험 결과 광선로 증폭기의 입력세기가 -18dBm이고, 이득이 28dB인 경우 수신기 입력단에서 측정된 광학적 신호대 잡음비는 28dB로 나타났으며, 광섬유를 사용하지 않은 경우와 비교하여 2dB의 전력 패널티가 발생한 것으로 나타났다. 광섬유 전송 후 발샹한 2dB의 전력 패널티는 광학적 신호대 잡음비 열화에 의해 1dB, 경로 패널티에 의해 1dB가 발생하는 것으로 조사되었다.

  • PDF

4광파 혼합 현상을 이용한 스펙트럼 저미어진 광섬유 증폭 광원의 SNR 개선 방법 (A novel method to improve SNR of the spectrum-sliced incoherent light source using the four-wave mixing in a dispersion-shifted fiber)

  • 한정희;고준원;이재승;신상영
    • 한국광학회지
    • /
    • 제9권1호
    • /
    • pp.15-19
    • /
    • 1998
  • 본 논문에서는 고속 장거리 광전송시스템에서 스펙트럼 저미어진 광섬유 증폭 광원의 분산 패널티를 줄일 수 있는 전 광학적 방법을 새로이 제안하였다. 즉, 수신된 신호의 광 선폭을 확장하므로 잡음광의 2.5 Gb/s 전송에 필요한 송신 채널의 선폭을 0.1 nm까지 줄였다. 선폭 확장은 분산천이 광섬유에서 intra-channel 4광파 혼합현상을 이용하였으며, 그 결과 송신채널의 신호대 잡음비를 개선할 수 있었다. 이 방법을 이용하여 0.1 nm 채널 선폭을 갖는 2.5Gb/s NRZ 변조된 광신호의 분산천이 광섬유 300 km 전송을 성공적으로 수행하였다. 선폭 확대 전에는 비트 에러율이 $1{\times}10^{-5}$이었으나, 선폭 확대 후 비트 에러율이 $1{\times}10^{-10}$ 이하로 개선되었으며, 측정한 전송 패널티는 05. dB 이하였다. 이 결과는 지금까지 보고된 가간섭성이 없는 잡음 광원을 사용한 2.5 Gb/s 전송 실험 중에서 최소의 선폭과 최고의 전송거리 값을 갖는 결과이다.

  • PDF

스펙트럼 반전법을 이용한 10 Gb/s 광신호의 200 km 비분산천이 광섬유 전송 (Transmission of 10Gb/s signal over 200km of non-dispersion shifted fiber by using mid-span spectral inversion)

  • 이상수;이창희
    • 한국광학회지
    • /
    • 제7권4호
    • /
    • pp.428-433
    • /
    • 1996
  • 색분산 보상법으로 스펙트럼 반전법을 사용하여 10Gb/s 광신호의 200km 비분산천이 광섬유 전송실험을 수행하였다. 스펙트럼 반전 신호광은 분산천이 광섬유에서의 4광파 혼합 현상에 의해 발생되었다. 스펙트럼 반전 신호광의 반전효율과 신호대 잡음비는 각각 -26.7dB와 23.0dB였다. 수신감도 측정 결과 광섬유를 사용하지 않은 경우 BER $10^{-9}$에서 -28.0dBm이었고, 200km의 비분산천이 광섬유를 사용한 경우에 대해서는 -27.0dBm이었다.

  • PDF

Chromatic Dispersion Compensation via Mid-span Spectral Inversion with Periodically Poled $LiNbO_3$ Wavelength Converter at Low Pump Power

  • Kim, Min-Su;Ahn, Joon-Tae;Kim, Jong-Bae;Ju, Jung-Jin;Lee, Myung-Hyun
    • ETRI Journal
    • /
    • 제27권3호
    • /
    • pp.312-318
    • /
    • 2005
  • Mid-span spectral inversion (MSSI) has to utilize high optical pump power, for its operation principle is based on a nonlinear optical wavelength conversion. In this paper, a low pump-power operation of MSSI-based chromatic dispersion compensation (CDC) has been achieved successfully, for the first time to our knowledge, by introducing a noise pre-reduction scheme in cascaded wavelength conversions with periodically poled $LiNbO_3$ waveguides at a relatively low operation temperature. As preliminary studies, phase-matching properties and operation-temperature dependence of the wavelength converter (WC) were characterized. The WC pumped at 1549 nm exhibited a wide conversion bandwidth of 59 nm covering the entire C-band and a conversion efficiency of -23.6 dB at 11 dBm pump power. CDC experiments were implemented with 2.5 and 10 Gb/s transmission systems over 100 km single-mode fiber. Although it is well-known that the signal distortion due to chromatic dispersion is not critical at a 2.5 Gb/s transmission, the clear recovery of eye patterns was identified. At 10 Gb/s transmission experiments, eye patterns were retrieved distinctly from seriously distorted ones, and notable improvements in bit-error rates were acquired at a low pump power of 14 dBm.

  • PDF

1.25 Gb/s Broadcast Signal Transmission in WDM-PON Based on Mutually Injected Fabry-Perot Laser Diodes

  • Yoo, Sang-Hwa;Mun, Sil-Gu;Kim, Joon-Young;Lee, Chang-Hee
    • Journal of the Optical Society of Korea
    • /
    • 제16권2호
    • /
    • pp.101-106
    • /
    • 2012
  • We demonstrate a cost effective broadcast signal transmission at 1.25-Gb/s with 100 GHz channel spacing based on a broadband light source (BLS) for a wavelength division multiplexing-passive optical network (WDM-PON). The BLS is implemented by using mutually injected Fabry-Perot laser diodes (MI F-P LDs). The error-free transmission without a forward error correction (FEC) is achieved by its low relative intensity noise (RIN). The number of usable modes is determined by RIN and/or extinction ratio (ER) in the spectrum sliced light output.

전기적 시분할 다중 방식을 이용한 20 Gb/s 광송,수신기의 제작 및 성능 평가 (Configuration of ETDM 20 Gb/s optical transmitter / receiver and their characteristics)

  • 임상규;조현우;류갑열;이종현
    • 한국광학회지
    • /
    • 제13권4호
    • /
    • pp.295-300
    • /
    • 2002
  • 20 Gb/s 광 전송 시스템을 위한 광 송신기와 수신기를 전기적 시분할 다중 방식으로 제작하고 그 특성을 측정하였다. 특히 광 수신기의 핵심 회로인 클럭(19.906㎓) 추출 회로의 구현을 위해 반파장 지연 선로와 상용화된 EX-OR 소자를 이용한 NRZ-PRZ 변환기와 유전체 공진기를 이용한 협대역 대역통과 필터 및 마이크로스트립 대역통과 필터를 설계, 제작하였으며, 최종적으로 수신부에서 1:2로 역다중화된 10 Gb/s 신호의 비트 오율(BER)을 측정하였다. 제작된 송ㆍ수신기를 직접 연동하였을 때, 수신기의 수신 감도는 BER $1{\times}10^{-12}$에서 -26.2dBm을 나타내었다.