• Korean Journal of Animal Reproduction
• /
• v.16 no.3
• /
• pp.269-276
• /
• 1992

Studies were carried out to find the freezing media which gives no ice crystals in single(glycerol, ethylene glycol, dimethyl sulfoxide(DMSO)) and mixture solutions(glycerol＋propylene glycol, glycerol＋ethylene glycol) of permeable cryoprotectants in vitrification solution and to study effects of VS on the survival of vitrified mouse morulae. The results are summarized as follows: 1. In toxicity test of permeable cryoprotectants, 30% glycerol of single solution showed the highest FDA-score(4.1) in mouse morulae frozen compared among other single solutions. The FDA-score(4.1) of 30% glycerol was higher than 30% ethylene glycol(3.6) and DMSO(1.4( (P<0.05). 2. 20, 30 or 40% single solution of permeable cryoprotectants containing m-PBS with 10% sucrose and 20% BSA was not crystallized during cooling, but crystallized during warming. However, the 30% mixture solution of the two permeable cryoprotectants was not crystallized both during cooling and warming.3. When mouse morulae were frozen in 30% mixture solutions of two permeable cryoprotectants(glycerol and propylene glycol, glycerol and ethylene glycol), highest FDA-score(4.5) was obtained in a mixture solution of 20% glycerol and 10% ethylene glycol(20G10E) than other 30% mixture solutions(10G20E, 15G15E, 20G10P, 15G15P, 10G20P) and there was significant difference between 20G10E and 10G20E(P<0.05).

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.821-826
• /
• 2001

Solvent sublation has been studied for the separation and determination of trace Zn(Ⅱ) and Pb(Ⅱ) in water samples. A synergy producing method was utilized to improve the efficiency of extraction in the sublation using an ion-pair of metal-naphth oate {M-(Nph)3- } complexes and tetra-n-butylammonium (TBA+ ) ion. After the M-(Nph)3- complexes were formed by adding 1-naphthoic acid to the sample solution, tetra-n-butylammonium bromide was added in the solution to form the ion-pair. And sodium lauryl sulfate (SLS) was added to make the ion-pair hydrophobic. The ion-pairs of the metal complexes were floated and extracted into methylisobutyl ketone (MIBK) from the aqueous solution by bubbling with nitrogen gas in a flotation cell. Metal ions in MIBK solution were measured by graphite furnace-AAS. Experimental conditions were optimized as follow so. After the pH of a 1.0 L water sample was adjusted to 5.0, 6.0 mL of 0.1 M 1-HNph and 10 mL of 0.03 M TBA-bromide were added to the sample to form ion-pairs, and 2.0 mL of 0.2%(w/v) SLS was added to make the ion-pairs hydrophobic. The solution was bubbled with 30 mL/min N2 gas for 5 minutes in a flotation cell. Linear calibration curves were obtained for the determination of Zn(Ⅱ) and Pb(Ⅱ) in several water samples. Reproducible results of showing a relative standard deviation of < 10% and recoveries of 80-100% could be obtained.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1409-1412
• /
• 1999

The spectrophotometric determination method of scandium with eriochrome cyanine R (ECR) and the composition ratio of the complex were investigated in the presence of surfactants. A volume of 5 mL of 1.0×$10^{-3}$ M ECR and 10 mL of 2.0×$10^{-4}$ M CTMAB are necessary for the determination of 1.0×$10 ^{-7}$ ~ 3.0×$10^{-6}$ M Sc(III) at pH 6.5. The apparent molar absorption coefficient of the Sc(III)-ECR-CTMAB, ternary complex at 610 nm is 5.6×$10^5$ $mol^{-1}cm{-1}$L and its detection limit is 1.0×$10^{-7}$ M. Separation studies were conducted by the column method. The effect of pH, elution solution and the influence of rare earth elements as interferents was discussed. Their separation was carried out in 0.1 M HCl-50% methanol solution and 1.0 M HCl media. The method was applied for the determination of Sc(III) in monazite.

• Journal of the Korean Chemical Society
• /
• v.10 no.3
• /
• pp.119-128
• /
• 1966

The glass electrode was empirically calibrated in methanol-and 2-propanol-water mixed solvents, by means of which the pH-meter reading could be converted to stoichiometric hydrogen ion concentration. The thermodynamic dissociation constants of hydrogen cupferrate in methanol-and 2-propanol-water solution were potentiometrically determined with the changes in composition of organic solvents at 0.01 and 0.05 of the ionic strength and 25$^{\circ}C$. The empirical formula of the constants with mole fraction (n) of the organic solvent are as follow: methanol-water solution $pK_a$= 2.24n + 4.29 at ${\mu}$ = 0.01 n = 0.0476∼0.642 $pK_a$ = 2.35n + 4.38 at ${\mu}$ = 0.05 n= 0.0446~0.642 2-propanol-water solution $pK_a$= 5.50n + 4.48 at ${\mu}$ = 0.05 n = 0.0253~0.259 The relationships between $pK_a$ of acetic acid, propionic acid and HCup and dielectric constant of some mixed solvents were discussed. It would be considered that the factors effecting $pK_a$ value of weak acid in mixed-solvent are not only dielectric constants but acid-base character and solvation effect of the solvent, etc.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.1
• /
• pp.22-27
• /
• 2005

To find out the optimum mixture ratio of ammonium and nitrate on rice plant, 4 rice varieties were examined during 14days after transplanting in hydroponics with the different ratio of ammonium to nitrate(100 : 0, 75: 25,50: 50, 25: 75 and 0: 100). The highest N uptake from solution and the maximum plant dry weight were $60\~70\%$ ammonium and $30\~40\%$ nitrate mixture treatment both in Japonica and Tongil type rice plants. And with the same varieties N-uptake and N use-efficiency were compared between 10.0 mM and 1.0 mM nitrogen using $70\%$ ammonium and $30\%$ nitrate for 24 days after transplanting. Rice plants absorbed more nitrogen$(131\~145\%)$ in 10.0mM than 1.0mM treatment but accumulated N in rice plants were almost the same in both treatment. Among the tested rice cultivars, dry matter production and total accumulative nitrogen in rice plants were much high in Tongil type than japonica type rice cultivars. N-recovery ratios of rice plants from uptake N were $90.8-99.0\%$ in low concentration N solution(1.0 mM), but $69.4-81.7\%$ were observed in high concentration N solution(10.0 mM). It means that suppling low concentration N steadily will be better to prevent loss of N without reducing of growth in rice plants.

• Applied Microscopy
• /
• v.23 no.2
• /
• pp.1-10
• /
• 1993

The effect of electrolyte on the extraction replicas of the precipiates in 3% Si steel was investigated. Three Kinds of electrolyte, 2% Nital solution (2% nitric acid+methanol; acid solution),, Sodium Citrate solution (5% sodiumcitrate+1% KBr+0.5KI+$H_{2}O$; aqueous neutral solution) and 10% AA solution (10% acetylacetone+ 1% tetramethylammoniumchloride+methanol; non-aqueous neutral solution), were compared. The preciptiates in 3% Si steel were dissolved in 2% Nital, but they were not dissolved in the Sodium Citrate and 10% AA solution. In Sodium Citrate solution, however, large second artifacts were introduced during sample preparation. Therefore 10% AA solution was found to be most useful for the preparation of extraction replica. The electrolysis condition of a matrix and precipitates were also checked by the measurement of potential-current curve in 10% AA solution. The matrix was electrolyzed at -400mV with respect to SCE(Saturated Calomel Electrode). In contrats precipitates were electrolyzed above 300mV. Precipitates were respected to be stable in 10% AA solution in the range of $-380mV{\sim}-300mV$ usually used to prepare extraction replicas.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.328-334
• /
• 2014

This study examined the effect of concentration polarization on permeate flux in forward osmosis (FO) membrane process for saline and sucrose solution. The reduction in permeate flux during the FO membrane process is largely due to the formation of concentration polarization on membrane surfaces. The flux reduction due to internal concentration polarization formed on the porous support layer was larger than that due to the external concentration polarization on the active membrane surface. Water permeate flux through the FO membrane increased nonlinearly with the increase in osmotic pressure. The water permeability coefficient was $1.8081{\times}10^{-7}m/s{\cdot}atm$ for draw solution on active layer (DS-AL) mode and $1.0957{\times}10^{-7}m/s{\cdot}atm$ for draw solution on support layer (DS-SL) mode in NaCl solution system. The corresponding membrane resistance was $5.5306{\times}10^6$ and $9.1266{\times}10^6s{\cdot}atm/m$, respectively. With respect to the sucrose solution, the permeate flux for DS-AL mode was 1.33~1.90 times higher than that for DS-SL mode. The corresponding variation in the permeation flux (J) due to osmotic pressure (${\pi}$) would be expressed as $J=-0.0177+0.4506{\pi}-0.0032{\pi}^2$ for the forward and $J=0.0948+0.3292{\pi}-0.0037{\pi}^2$ for the latter.

• Journal of Chest Surgery
• /
• v.27 no.10
• /
• pp.815-823
• /
• 1994

This study was undertaken to hemodynamically determine the differences of myocardial protective effect between crystalloid and blood cardioplegic solution. Twenty nine children undergoing cardiac operations due to cyanotic congenital heart diseases were randomized into two groups receiving crystalloid or blood cardioplegia. Cardiac indices and other hemodynamic datum were examined postoperatively. Although there was no statistical differences between groups, postoperative stroke volume indices and left ventricular stroke work indices were slightly better with blood cardioplegia. We also found that postoperative left atrial pressures[p=0.0003], central venous pressures[p=0.004], and heart rates[p=0.014] were significantly lower with blood cardioplegia. The fact that relatively lower ventricular preloads [left atrial pressure and central venous pressure] were required to provide adequate cardiac output in blood cardioplegia group suggested superior myocardial protective effect of blood cardioplegic solution.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.4
• /
• pp.705-714
• /
• 2012

In this paper, we study nonlinear equation arising in MEMS modeling electrostatic actuation. We will prove the local and global existence of solutions of the generalized parabolic MEMS equation. We present that there exists a constant ${\lambda}^*$ such that the associated stationary problem has a solution for any ${\lambda}$ < ${\lambda}^*$ and no solution for any ${\lambda}$ > ${\lambda}^*$. We show that when ${\lambda}$ < ${\lambda}^*$ the global solution converges to its unique maximal steady-state as $t{\rightarrow}{\infty}$. We also obtain the condition for the existence of a touchdown time $T{\leq}{\infty}$ for the dynamical solution. Furthermore, there exists $p_0$ > 1, as a function of $p$, the pull-in voltage ${\lambda}^*(p)$ is strictly decreasing with respect to 1 < $p$ < $p_0$, and increasing with respect to $p$ > $p_0$.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.596-601
• /
• 2009

Double-layered ZnO nanostructures have been synthesized by aqueous solution method on (001) plane of ZnO nanorod. A stepwise changing of aqueous solution concentration gave rise to a new nano-structured layer consisting of either multiple of nanorods or nanowires with much smaller radii than that of the ZnO nanorod on which the new layer was grown. As the first step the ZnO nanorods have been grown to have the (001) preferential orientation in the aqueous solution consisting of 0.1M zinc nitrate and 0.1 M HMT. This preferentially aligned ZnO nanorods have been regrown in either a less diluted solution of 0.01M zinc nitrate and 0.01 M HMT or a more diluted solution of 0.005M zinc nitrate and 0.01 M HMT. A new nano-layer consisting of numerous aligned nanorods or nanowires has been produced on the (001) planes of ZnO nanorods. The growth mechanism for this double layered ZnO nanostructure is ascribed to the (001) polar surface energy instability and inhibition of (001) plane growth due to the step-wise change of aqueous solution concentration; ZnO nuclei formed on the (001) plane grow preferentially in (010) plane instead of (001) plane to reduce the total surface energy. Surface area of ZnO nanostructure can be increased in orders of magnitudes by forming a new layer consisting of smaller nanorods/nanowires on (001) plane of ZnO nanorods.