• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.72-80
• /
• 2021

Based on the previous year's statistics, 37% of buildings in South Korea are aged over 30 years. As the number of the aging buildings increases, so does the need for maintenance. Building maintenance involves a significant number of works; the work of 'maintenance manager' accounting for the largest part. Currently, the maintenance history record is mostly in drawing or handwritten form which makes reviewing the data highly time consuming. Therefore, to improve the convenience of maintenance works and optimize historical data management, the existing maintenance process was analyzed. Problems were derived and a smart device-based automation model was established. In order to establish a smart device-based automation model, ① general flow of facility management process was analyzed and related articles were reviewed, ② current maintenance process was optimized, ③ functional block diagram of BIM Data, COBie Data, IoT, and AR-based automated maintenance management model was created, ④ a smart device-based automated maintenance management model was constructed, ⑤ finally, the above system was verified by testing the aforementioned model in the field site, evaluating the time required for the maintenance process and reviewing maintenance history data against the current one.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.5
• /
• pp.411-419
• /
• 2019

Underground concrete structures are constructed under a geographical environment called underground and exposed to various environments that promote deterioration. Among them, groundwater promotes deterioration of underground concrete structures due to contaminated water from the ground. In this study, the chemical resistance performance test evaluation of five different receptors for a total of 15-type leakage repair materials of five series was conducted to determine the chemical stability of the leakage repair material used in the crack area. The results show a general increase and decrease in most chemical receptors, but the biggest increase and decrease was shown in acrylic systems, which were found in sodium chloride and sodium hydroxide, and epoxy was found in hydrochloric acid. The cement system is showing a lot of increase and decrease in sodium chloride. It is expected that the results of these studies will be used as a basis for chemical stabilization in the development of new materials.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.243-249
• /
• 2016

The present work is for an evaluation of resistance to corrosion in steel coated with cementitious repair material, so that 3 cases of steel plate(Normal, Welding, Welding & coating case) are subjected to ICM(Impressed Current Method) for acceleration of corrosion for 7days. Tested and estimated corrosion ratio through Faraday's Law are compared, and the related flexural strength are evaluated. In Normal and Welding cases, similar level of corrosion ratio(70%) is evaluated, however only 17% level of corrosion ratio is evaluated in the Welding & coating case, which indicates that cementitious repair material is effective to anti-corrosion due to a block of chloride penetration. The flexural test results are consistent with those in accelerated corrosion test, which shows a significant flexural strength in Welding & coating case by 3.4times greater than the others. The cementitious material repair coating is evaluated to be effective to anti-corrosion in welding of steel plate.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.879-890
• /
• 2017

The US Pavement Design method (AASHTO) and HDM-4, a road pavement maintenance decision system, are not suitable for domestic pavement design, construction and maintenance. KPRP(Korea Pavement Research Program) has been developed to reflect Korea's environmental conditions and vehicle characteristics, thereby, extending pavement life. The main objective of this study is to select the best alternative through Life Cycle Cost $CO_2$ (LCCC) calculations among three representative maintenance strategies using KPRP design software since the environment cost resulting from the extended pavement life will also differ. The analysis of this study illustrates that cumulative carbon emissions for 40 years in alternative 2 (Cutting and Overlaying at Year 30) is the lowest option among them, and the basic cost of $CO_2$ emission by various road maintenance and repair work can be used for suggesting an optimal maintenance strategy for highway agency.

• Journal of the Korean association of regional geographers
• /
• v.10 no.1
• /
• pp.96-109
• /
• 2004

Applying the construct of country image this study examined city image for Daegu in Korea. Study 1 measured the city image for Daegu and Seoul, identified the city image dimensions, and compared the images of the two cities. Study 2 confirmed the city image dimensions and examined the Daegu image by residency and demographic characteristics of respondents in Daegu and Seoul regions. The study extracted 4 dimensions of city image including economy, people, conservatism, and development capability. High conservatism and low economic prosper represented the image of Daegu while the opposite did of Seoul. Regardless of residency, single and Young respondents with high income and education had negative images for Daegu, and residents in Daegu rather than in Seoul had more negative images.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.462-469
• /
• 2003

This paper presents an experimental study on the potential durability enhancement of infrastructures repaired by a sprayed high ductile fiber-reinforced cementitious composite (ECC). For this study, a PVA-ECC which exhibits sprayable properties in the fresh state and tensile strain-hardening behavior in hardened state was sprayed and tested. The experimental results show that the sprayed ECC exhibits mechanical properties with strain capacity comparable to the cast ECC with the same mix design. During loading, the crack widths of ECC are tightly controlled with an average of 30${\mu}m$. It is also revealed that when sprayed ECC is used as a repair material, ductility represented by deformation capacity at peak load of repaired beams in flexure are obviously increased in comparison to those of commercial prepackaged mortar (PM) repaired beams. In addition to high delamination resistance, the significant enhancement of energy absorption capacity and crack width control in ECC repair system suggest that sprayed ECC can be effective in extending the service life of rehabilitated infrastructures.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.579-585
• /
• 2023

The purpose of this study is to explore keywords within stalking-related news articles according to political orientation through the text network analysis, and then to examine the implicit intentions. Selecting total 1,607 articles including 824 articles of the conservative press(The Chosun Ilbo, The Joongang Ilbo) and 783 articles of the progressive press(The Hankyoreh, The Kyunghyang Shinmun) reported from January 1, 2018 to December 31, 2022, this study explored the aspect of topic category drawn through the topic modeling technique based on LDA(Latent Dirichlet Allocation). In the results of this study, the common topics of the conservative and progressive press were improvement of the perception of gender-based violence, personal protection & intensity of punishment, and disclosure of stalkers' personal information. Regarding the topics differently shown in those two press, the conservative press showed stalkers' harmful act, and outline of 'murder case at Sindang Station' while the progressive press showed request for aggravated punishment on the 'murder case at Sindang Station', and eradication of sexual exploitation crime (in cyber space). The results of this study imply that there are changes in the type of reporting according to ideological opinions about stalking in news articles.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.35-42
• /
• 2024

This research explores the potential of methyl methacrylate(MMA) as a material for road repair applications. It specifically examines two MMA formulations, referred to as type A and type B, in relation to their performance on concrete substrates. The evaluation criteria included drying time, tensile bond strength, and resistance to alkali. The condition of the substrate surface was varied across three curing environments: constant temperature and humidity(R), immersion in water(W), and immersion in water with chloride ions(N). The findings indicate that type B MMA exhibits a quicker drying time and superior resistance to alkali compared to type A. While type A demonstrated greater tensile bond strength, it failed to maintain adhesion with the concrete base. Based on the parameters tested in this study, type B MMA emerges as the more favorable option for road repair contexts. Nonetheless, the study underscores the necessity for additional testing on asphalt substrates to fully assess the material's durability and applicability for long-term road maintenance.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.522-525
• /
• 1985

The dried soymilk residue (SMR) was added into soybean water extract in order to investigate its effect on physical characteristics of soybean curd. As the mixing ratio (d. b.) increased, the volume and water holding capacity of the curd was reduced and penetration value was increased. However, the Sag value was rather increased until 20% of mixing ratio reached and then decreased drastically by 30% addition of SMR. The overall physical and sensory quality showed that substitution of soybean with SMR by 10% was recommendable without significant unfavorable change in quality of soybean curd. The proposed method of absorption of unbound water on filter paper was proved to be simple and reliable for measurement of water holding capacity of soybean curd.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1368-1373
• /
• 2009

The purpose of this study was to assess the influence of waist size on the reliability and validity of pedometers to count steps in children and youth. The participants for this study were 20 children and youth, composed of 14 Hispanic and 6 Caucasian children. Ten children and youth had waist circumferences greater than the $85^{th}$ percentile (Body Mass Index (BMI)=$28.91\pm3.07$), and 10 children and youth had waist circumferences smaller than the $50^{th}$ percentile (BMI=$18.05\pm1.55$). To examine pedometer reliability, each child completed 3 ascent and descent trials up a set of 15 stairs while wearing a Yamax SW-701 pedometer. The main effect of trials was not statistically significant for the stair ascent trials F (2, 36)=2.575 or for the descent trials F (2, 36)=0.235. The trial by group interaction was also not statistically significant. To examine the influence of waist circumference on the validity of the pedometer in counting walking steps at a self-selected walking pace, the children and youth in the two groups completed a 400-m course. The main effect on the groups was statistically significant, F (1, 18)=7.489. The main effect of counting techniques was not statistically significant, F (1, 18)=2.983 (hand-counted vs. pedometer counted). Overall, the trial and trial by group interaction comparisons for the 400-m walk were not statistically significant, suggesting that the pedometer was equally valid as a tool for assessing walking steps in high waist circumference (HWC) and low waist circumference (LWC) in children and youth.