• The Journal of the Korea Contents Association
• /
• v.19 no.11
• /
• pp.527-548
• /
• 2019

For Deleuze, the frame is a closed system with numerous subsets of information. the frame can be defined by mathematics and physics. it is a geometric system of equilibrium and harmony with variables or coordinates. like paintings, Linear perspective represents a three-dimensional depth in a two-dimensional plane through vanishing points, horizontal lines in the frame. Linear perspective makes it possible to assume the infinity towards the vanishing point and the infinity towards the outside of the frame, the opposite of the vanishing point. Not only figures and lines in the drawing paper, but also the space between the figures and lines in the drawing paper was recognized. that is space, the 3rd dimension. with the centripetal force and centrifugal force of the frame, frame follow the physical rules of power and movement. de framing is against the dominant linear perspective and central tendency of the frame. The film contains four-dimensional time while reproducing three-dimensional space in two dimensions. It may be that the outside of the frame, or outside the field of view, contains thought, the fifth dimension.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.121-130
• /
• 2007

To investigate the enhancement in strength and deformation capacities of concrete confined by FRP composites, tests under axial loads were carried out on three groups of thirty six short columns in circular section with diverse GFRP confining reinforcement. The major test variables considered include fiber content or orientation, wrap or tube type by varying the end loading condition, and continuous or discontinuous confinement depending on the presence of vortical spices between its two halves. The circumferential FRP strains at failure for different types of confinements were also investigated with emphasis. Various analytical models capable of predicting the ultimate strength and strain of the confined concrete were examined by comparing to observed results. Tests results showed that FRP wraps or tubes provide the substantial increase in strength and deformation, while partial wraps comprising the vertical discontinuities fail in an explosive manner with less increase in strength, particularly in deformation. A bilinear stress-strain response was observed throughout all tests with some variations of strain hardening. The failure hoop strains measured on the FRP surface were less than those obtained from the tensile coupons in all tests with a high degree of variation. In overall, existing predictive equations overestimated ultimate strengths and strains observed in present tests, with a much larger scatter related to the latter. For more accuracy, two simple design- oriented equations correlated with present tests are proposed. The strength equation was derived using the Mohr-Coulomb failure criterion, whereas the strain equation was based on entirely fitting of test data including the unconfined concrete strength as one of governing factors.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.259-270
• /
• 2010

In this paper, a Location Information-based Gradient Routing (LIGR) algorithm is proposed for setting up routing path based on physical location information of sensor nodes in wireless ad-hoc networks. LIGR algorithm reduces the unnecessary data transmission time, route search time, and propagation delay time of packet by determining the transmission direction and search range through the gradient from the source node to sink node using the physical location information. In addition, the low battery nodes are supposed to have the second or third priority in case of forwarding node selection, which reduces the possibility of selecting the low battery nodes. As a result, the low battery node functions as host node rather than router in the wireless sensor networks. The LIGR protocol performed better than the Logical Grid Routing (LGR) protocol in the average receiving rate, delay time, the average residual energy, and the network processing ratio.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.133-140
• /
• 2003

In this study, muscle activity was measured using surface EMG (sEMG) during a voluntary maneuver (ankle dorsiflexion) in the supine position was compared pre and post gait training. Nine patients with incomplete spinal cord injury participated in a supported treadmill ambulation training (STAT), twenty minutes a day, five days a week for three months. Two tests, a gait speed test and a voluntary maneuver test, were made the same day, or at least the same week, pre and post gait training. Ten healthy subjects' data recorded using the same voluntary maneuvers were used for the reference. sEMG measured from ten lower limb muscles was used to observe the two features of amplitude and motor control distribution pattern, named response vector. The result showed that the average gait speed of patients increased significantly (p〈0.1) from 0.47$\pm$0.35 m/s to 0.68$\pm$0.52 m/s. In sEMG analysis, six out of nine patients showed a tendency to increase the right tibialis anterior activity during right ankle dorsiflexion from 109.7$\pm$148.5 $mutextrm{V}$ to 145.9$\pm$180.7 $mutextrm{V}$ but it was not significant (p〈0.055). In addition, only two patients showed increase of correlation coefficient and total muscle activity in the left fide during left dorsiflexion. Patients' muscle activity changes after gait training varied individually and generally depended on their muscle control abilities of the pre-STAT status. Response vector being introduced for quantitative analysis showed good Possibility to anticipate. evaluate, and/or guide patients with SCI, before and after gait training.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.24-24
• /
• 2010

Chalcopyrite $Cu(In,Ga)Se_2$ (CIGS) 화합물 반도체는 고효율 박막태양전지의 광 흡수층으로 사용되는 물질 중 가장 우수한 효율 (19.9%, NREL 2008)을 보유하고 있다. CIGS는 직접천이형 에너지밴드갭 (direct bandgap)을 가지고 있고, 광흡수계수가 $1{\times}10^5\;cm^{-1}$로서 반도체 중 서 가장 흡수율이 높은 재료에 속하여 두께 $1{\sim}2\;{\mu}m$의 박막으로도 고효율의 태양전지 제조가 가능하고, 또한 장기적으로 전기광학적 안정성이 매우 우수한 특성을 지니고 있다. 현재 고효율 CIGS 셀생성을 위해 널리 사용되고 있는 CIGS 흡수층 성장공정은 "co-evaporation(동시증발법)"과 2-step 공정이라 불리는 "sputter-selenization(스퍼터-셀렌화)" 방법이다. 동시증발법은 개별원소 Cu, In, Ga, Se 들을 고진공 분위기에서 고온 ($550{\sim}600^{\circ}C$)기판위에 증착하는 방법으로 소면적에서 가장 좋은 효율(~20%)을 보이는 공정이다. 하지만, 고온, 고진공 공정조건과 대면적 증착시 온도 및 조성 불균일 등의 문제점 등으로 상용화에 어려움이 있다. 스퍼터-셀렌화 공정은 1단계에서 스퍼터링 방식으로 CuGaIn 전구체를 증착하고, 2단계에서 고온($550{\sim}600^{\circ}C$)하에 $H_2Se$ 혹은 Se vapor와 반응시켜 CIGS를 생성한다. 일본의 Showa Shell와 Honda Soltec 등에 의해 이미 상업화 되었듯이, 저비용 대면적으로 상업화 가능성이 높은 공정으로 평가되고 있다. 하지만, 2단계에서 사용되는 $H_2Se$ 및 Se vapor의 유독성, 기상 Se과 금속전구체 간의 느린 셀렌화 반응속도, 셀렌화반응 후 생성된 CIGS 박막 두께방향으로의 Ga 불균일분포, 생성된 CIGS/Mo 계면 접착력 저하등의 문제점들이 해결되어야만 상업화에 성공할 수 있을 것이다. 본 Tutorial에서는 CIGS 물질의 열역학 상평형과 반응메카니즘에 대해 설명하고, 다양한 생성 공정들을 소개할 것이다.

• Journal of the Korean Society for Library and Information Science
• /
• v.40 no.4
• /
• pp.221-244
• /
• 2006

This research analyzes the current status of personal name authority control and its impact on the end user searching against OPACs in public libraries in Korea. Further it also suggests the ways to improve the recall ratio in author search with a minimal modification, system-wise and authority-wise. on the KOLISNET as a stepping stone for other public libraries. Finally, a long-term plan for establishing proper authority work in public libraries including the National Library of Korea is briefly proposed. In order to find out whether authority works are conducted and examine how variant written forms of the same foreign name and variant names of the same person are treated, OPACS of the National Library of Korea, KOLISNET, and ten randomly selected public libraries were searched. Findings indicate that while the National Library of Korea was performing authority control, even incomplete, the rest did not appear to conduct any form or authority control. As a spinoff of the research, it is observed that in many public libraries their bibliographic records and retrieval methods are inaccurate, lacking consistency, and incomplete. In sum. it is strongly recommended that (1) as a start for authority work among public libraries personal name authority control should be conducted to enhance the identifying and collocating functions in OPACs, (2) a shared authority database, for which the National Library of Korea's authority database might be used. should be built for Public libraries.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.5
• /
• pp.432-438
• /
• 2004

Acoustic levitation induced by ultrasonic flexural vibration at 28.4 KHz with a vibration amplitude of 10 micrometers is presented. Levitation of multiple objects along the length of the beam in a gap of 8.3 mm which is the half of acoustic wavelength is experimentally demonstrated. Analytical analysis predicts that levitated objects for the gap of half-the wavelength converges to the center of the gap, which is experimentally verified. It is observed that levitated objects with well-balanced mass distribution are set into rotation due to acoustic streaming. For cylinder-shaped Styrofoam with a diameter of 1.8 mm and a length of 3 mm, measured rotational velocity is 2400 revolution per minute. Applications of standing wave field levitation (SWFL) include manipulation of biological cells and blood constituents in biotechnology, and fine powder in material engineering.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.184-188
• /
• 2002

The Cu/Ni/Cu(002)/Si(100) films which have perpendicular magnetic anisotropy were deposited by e-beam evaporation methods. From the reflection high energy electron diffraction pattern, the films were confirmed to be grown epitaxially on silicon. After 2X lots ions/$\textrm{cm}^2$ C+ irradiation, magnetic easy-axis was changed from surface normal to in-plane as shown in the hysteresis loop of magneto-optical Kerr effects. It became manifest from analysis of X-ray reflectivity and grazing incident X-ray diffraction that even though interface between top Cu layer and Ni layer became rougher, the contrast of Cu and Ni's electron density became manifest after ion irradiation. In addition, the strain after deposition of the films was relaxed after ion irradiation. Strain relaxation related with change of magnetic properties and mechanism of intermixed layer's formation was explained by thermo-chemical driving force due to elastic and inelastic collision of ions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.56-63
• /
• 1998

The present study investigated local heat transfer characteristics around a film cooling hole with variations of free stream turbulence intensity The film cooling jet is injected through a single hole inclined at $30^{\cire}$ to the surface and laterally at $45^{\cire}$ for the blowing rates of 0.5, 1.0 and 2.0. Turbulence generating grids are used at upstream of the film cooling hole to change the turbulence intensity of free stream. Free stream turbulence intensity without grids is 0.5%. Two different turbulence generating grid is installed at different at locations upstream of the film cooling hole so that turbulence intensity of free stream varies from 3% to 10%. The naphthalene sublimation technique has been employed to determine local heat/ mass transfer coefficients. With low free stream turbulence intensity, heat/mass transfer augmented area by coolant or free stream is distinguished evidently. However, when free stream turbulence intensity is high, heat transfer is enhanced in all region and heat transfer enhanced regions are not clearly divided due to vigorous mixing of coolant and free stream. The peak values of heat/mass coefficients are decreased and the distributions of heat/mass transfer coefficients are more uniform with high turbulence intensity. The effect of turbulence intensity on heat transfer characteristics is more evident as blowing rate is higher.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.98-98
• /
• 1994

최근 청색반도체레이저의 실현을 위하여 ZnSe가 대표하는 II-Ⅵ족 화합물반도체와 Gan가 대표하는 III족 질화물반도체분야에서 집중적인 연구가 이루어지고 있으며, 아직까지 실용화 되지 않고 있는 청색반도체레이저의 출현에 대하여 많은관심이 모아지고 있다. III족 질화물반도체는 InM(Eg:1.9eV)부터 AIN(Eg: 6.2eV)에 이르기까지 전 조성영역에서 완전한 고용체를 이루며, 실온에서 직접천이형 에너지 대구조를 가지므로 청색 혹은 자외영역에서 동작하는 발광소자를 제작하는데 있어 유망시 되고 있는 소재이다. 특히 GaN와 InN의 3원흔정인 GaInN를 활성층으로 이용하면 그 발전파장을 370nm부터 650nm까지 즉 가시 전 영역으로부터 근 자외영역을 포함할 수 있게 된다. 이 연구에서는 AIGaN/GaInN 이중이종접합(DH) 구조의 고아여기에 의한 유도방출고아의 편광 특성을 조사하였다. 유기금속기상에피텍셜(MOVPE)법으로 성장한 AIGaN/GaInN DH 구조의 표면에 수직으로 펄스 발진 질소레이저(파장: 337.1cm, 주기 10Hz, 폭: 8nsec) 빔을 조사하고 DH구조의 단면으로부터의 유도방출광을 편광기를 통과 시킨 후 스펙트럼을 측정하였다. 입사고아 밀도가 증가함에 따라 약 402nm의 파장에서 유도발출에 의한 가도가 큰 피크가 나타났고, 그 반치폭은 약 18meV이었다. 실온에서 AIGaN/GaInN DH 구조로 부터의 유도방출에 필요한 입사광밀도의 임계치는 약 130㎾/$\textrm{cm}^2$이었다. 한편 편광각이 90$^{\circ}$일때는 발광스펙트럼의 강도가 매우 낮고 단지 자연방출에 의한 스펙트럼만이 나타났다. 편광각이 0$^{\circ}$일 때 최대의 방출광 강도를 나타내었으며, 편광각이 -90$^{\circ}$로 회전함에 따라 발고아강도의 강도가 감소하였다. 이와 같은 결과는 광여기에 의하여 AIGaN/GaInN DH 로 부터의 유도방출광이 GaInN활성층의 단면에 평행한 전기장의방향으로, 즉 TE모드로 선형적으로 편광됨을 의미한다. AIGaN/GanN DH 로 부터의 유도방출이 선형적으로 TE모드로 편광되는 것은 이 구조를 이용한 청색 및 자외선 반도체 레이저다이오드의 실현에 매우 유익한 것이다.