• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.3
• /
• pp.192-197
• /
• 2016

A novel heteroleptic ruthenium(II) complex bearing a 4-picolinic acid unit as anchoring ligands (trans-dithiocyanato bis(4-picolinic acid)ruthenium(II) (trans-H1)) was synthesized and its chemical structure was identified by $^1H$-NMR, FT-IR and mass spectroscopy. The optical, thermal, electrochemical and dye adsorption properties of trans-H1 dye were investigated and compared with those of the gold standard ruthenium complex, Ru(4,4'-dicarboxy-2,2'-bipyridine)$_2cis(NCS)_2$ (N3). DSSCs based on trans-H1 dyes were examined under the illumination of AM 1.5 G, $100mWcm^{-2}$ and exhibited typical photovoltaic properties with an open-circuit voltage ($V_{OC}$) of 0.46 V, a short-circuit current ($J_{SC}$) of $4.10mA{\cdot}cm^{-2}$, a fill factor (FF) of 60.4%, and a conversion efficiency (PCE) of 1.14%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.167-172
• /
• 2013

Titanium dioxides nanoparticles coated aluminum oxide powders were fabricated by pulsed laser deposition (PLD) with Nd : YAG laser at 266 nm. The Pulse laser energy is 100 mJ/pulse. During the irradiation of the focused laser on the $TiO_2$ target, Ar gas is supplied into the chamber. The gas pressure is varied in a range of $1{\times}10^{-2}$ to 100 Pa. Titanium dioxides nanoparticles deposited aluminum oxide powders were characterized by using energy dispersive X-ray spectroscopy (EDX), high resolution transmission electron microscopy (HR-TEM), in order to understand the effect of Ar background gas on surface morphology and properties of the powders. The coated $TiO_2$ nanoparticles had nanosized spherical shape and the crystallite sizes of 10~30 nm. The morphology of coated $TiO_2$ nanoparticles is not affected by gas pressure. However, the particle size and crystallinity slightly increased with the increase of gas pressure. According to this technique, the size and crystallinity of nanoparticles can be easily controlled by controlling pressure during the laser irradiation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.731-736
• /
• 2015

Rhodamine B (RhB) was utilized as a dye sensitizer for dye-sensitized solar cells (DSSCs) and its photovoltaic property was examined under the illumination of AM 1.5 G, $100mWcm^{-2}$. DSSCs based on RhB exhibited typical photovoltaic properties with an open-circuit voltage ($V_{OC}$) of 0.34 V, a short-circuit current ($J_{SC}$) of $1.55mA{\cdot}cm^{-2}$, a fill factor (FF) of 50%, and a conversion efficiency (PCE) of 0.26%. In order to further improve the photovoltaic properties of RhB-based DSSCs, the effect of (i) incorporating a strong electron-donating NCS unit into the RhB molecular backbone, (ii) combining a bis-negatively charged zinc complex anion ($Zn-dmit_2$, dmit=di-mercapto-dithiol-thione) with the amine cation of RhB, (iii) co-adsorbing RhB dyes with chenodeoxycholic acid (CDCA) molecules onto porous $TiO_2$ electrodes, was investigated and discussed.

• Journal of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.457-463
• /
• 1983

-Alkyl-2-hydroxyphenazine-5,10-dioxides were synthesized from hydroquinone, and alkyl benzofuroxanes which were previously obtained through five reaction steps starting from aniline. Infrared, nuclear mangnetic resonance spectrometry and elemental analysis were employed to identify the products concerned in the synthetic processes. It was observed that these alkylated phenazine oxides lowered the surface tension of water substantially. These derivatives showed stronger antimicrobial activity against both gram positive and negative microbes than 1-carboxyphenazine which had no alkyl side chain. It was also found that the antimicrobial activity of the phenazine compound increased when the nitrogen of the ring was bound to the oxygen atom.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.293-297
• /
• 2003

Silicon dioxide (SiO$_2$) layers were fabricated on Si$_3$N$_4$/SiO$_2$/Si layer structures by low pressure chemical vapor deposition (LPCVD). Potassium and aluminum were then coimplanted by implanting potassium ions with the energy of 100 ［keY］ and dose of 5x10$^{16}$ [cm￣$^2$］ and 1x10$^{17}$ [cm￣$^2$］ into an aluminum buffer layer on the SiO$_2$Si$_3$N4/SiO$_2$/Si structure. The pH, pNa, and pK ion sensitivities of the resulting layers were investigated and compared to those of as-deposited silicon dioxide layer. The pK-sensitivity of the silicon dioxide was enhanced by the K and Al coimplantation. On the contrary, the pH and pNa-sensitivities of the coimplanted silicon dioxides were quite lower than that of the as-deposited silicon dioxide.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.257-265
• /
• 2015

For estimating a net removal of carbon dioxides from a forest carbon offset project, it is necessary to consider secondary emissions occurred from the use of machineries or vehicles. According to the forest carbon standard in Korea, a default rate (5%) could be applied for estimating secondary emissions of small projects, which provide annual net removals less than or equal to $600tCO_2$, while secondary emissions should be estimated for larger projects with field survey. In this study, we intended to develop a methodology for estimating the secondary emission of a forest carbon project. For this purpose, we analyzed the working process and the carbon emissions of the forest management activities for major tree species in Korea. Based on the developed methodology, we estimated the secondary carbon emission of a reforestation project. The result showed that the secondary carbon emission of a reforestation project was estimated between 0.42% and 1.19 % compared to net removals, that is to say that the current default rate in the forest carbon standard could give an overestimated secondary emission.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.657-663
• /
• 1998

New asymmetric dimer, 7,7'-substituted (or H)-4-oxo-2,2'- dialkyl-l,l',2,2'-dibenzothiazine-3,3'dicarboxylic acid methyl ester-1,1,1',1'-tetraoxide 3,4'-yl ethers 2a-d were synthesized through the oxidative dimerization of 7-substituted (or H)-4-hydroxy-2-alkyl-1,2-benzothiazine-3-carboxylic acid methyl ester 1,1-dioxides la-d using silver oxide($Ag_2O$). 4-Oxo-2,2'-dialkyl-1,1'2,2'-dibenzothiazine-3,3'-dicarboxylic acid methyl ester-1,1,1',l'-tetraoxide 3,4'-yl ether 2c was identified by X-ray crystal structure determination.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.551-557
• /
• 1989

7-Alkyl-1,3-dihydroxyphenazine-5,10-dioxides were synthesized by the reaction of 1,3,5-trihydroxybenzene with 6-alkylbenzofuroxans which had been obtained from aniline and n-alkyl alcohols bearing butyl, hexyl and octyl group. 1,3-Dihydroxyphenazine-5,10-dioxide was also prepared by the reaction of 1,3,5-trihydroxybenzene with benzofuroxan. The surface tension of aqueous solutions of these phenazine dioxide derivatives was determined by surface tensiometer and it was found out that the surface tension decreased with an increase of the number of carbon in the alkyl group. The antimicrobial activities of these phenazine dioxide derivatives were investigated in terms of minimum inhibitory concentration by the common twofold dilution technique. The derivative bearing butyl group showed the highest activity among these derivatives examined. It was observed that the antimicrobial activity of these alkyl substituted phenazine dioxide derivatives was stronger than that of the unsubstituted phenazine dioxide derivative.

• Journal of Wetlands Research
• /
• v.12 no.1
• /
• pp.15-22
• /
• 2010

We measured net primary productivity, annual accumulation of organic carbon and leaf decomposition of Salix community in the flood plain of the Han River and the Nakdong River. Net primary productivity, annual accumulation of organic carbon of the Salix community were 22.5ton/ha/yr(16.7ton/ha/yr-31.2ton/ha/yr) and 9.7ton C/ha/yr(7.5ton C/ha/yr-14.0ton C/ha/yr) respectively, which showed the highest values among the woody plant communities reported in the Korea. It means that planting Salix in the flood plain of the river is the best way to remove carbon dioxides. The faster leaf decomposition occurred around, under and the herb of Salix community in order. Leaf decomposition rate of Salix was higher than that of mesophytes, but lower than that of hydrophytes.

• Journal of Preventive Medicine and Public Health
• /
• v.5 no.1
• /
• pp.1-7
• /
• 1972

During the period from June 1st 1971 to November 30 th 1971, studies on air pollution were made in Kwangju city. The city was divided into 6 areas; the downtown area, the semi-downtown area, the heavy traffic area, the commercial area, the residential area, the park area, 13 surveying sites were selected each representing the characteristics of the area. The Measurement methods which were used are described below. Sulfur oxides were measured by $PbO_2$ cylinder method, sulfur dioxides ($SO_2$) and carbon monoxide (CO) by the MSA & Kitakwa detector, dustfall by the Deposit gauge method, and the noise levels by the Kanomax soundlevel meter. The results obtained are as follows: 1. The mean value of sulfur oxides in Kwangju city was $1.16mg\;SO_3/day/100cm^2\;PbO_2$, ranging from $0.45mg\;SO_3/day/100cm^2\;PbO_2$ to $3.10mg\;SO_3/day/100cm^2\;PbO_2$. 2. The mean values of sulfur oxides according to its specific area in the city were $1.45mg\;SO_3/day/100cm^2\;PbO_2$ in heavy traffic area, 1.36 in downtown area, 1.23 in semi-downtown area, 1.11 in commercial area, 0.96 in residential area, and 1.07 in park area, respectively. 3. The average concentration of sulfur dioxide was 0.063 ppm from 2 to 5 P.M in Kwangju city. 4. The average concentrations of sulfur dioxides according to its specific area, from 2 to 5 P.M, in the city were 0.084 ppm in heavy traffic area & downtown area, 0.067 in commercial area, 0.053 in semi-downtown area, 0.052 in residential area, and 0.036 in park area. 5. The average concentration of carbon monoxide was 22.3 ppm from 2 to 5 P.M, in Kwangju city. 6. The average concentrations of carbon monoxide according to its specific area, from 2 to 5 P.M, in the city were 27.0 ppm in downtown area, 26.3 in semi-downtown area, 23.0 in heavy traffic area, 21.7 in commercial area, 20.0 in residential arera, and 17.6 in park area. 7. The mean value of dusifall in Kwangju city was $29.28ton/km^2/month$, ranging from $9.85ton/km^2/month$ to $66.34ton/km^2/month$. 8. The mean values of dustfall according to its specific area in the city were $50.37ton/km^2/month$ in semi-downtown area, 42.76 in heavy traffic area, 34.67 in downtown area, 17.77 in commercial area, 14.40 in park area, and 14.76 in residential area. 9. The mean values of the soluble dust in Kwangju city was $10.23ton/Km^2/month$ and that of the insoluble dust was $19.05ton/Km^2/month$. 10. The mean value of noise level in Kwangju city was 62 phon, ranging from 37 phon to 88 phon. 11. The mean values of noise level according to its specific area in the city were 76 phon in heavy traffic area, 67 in semi-downtown area, 64 in downtown area, 59 in commercial area, 52 in part area, and 50 in residential area.