• Journal of The Korean Association of Information Education
• /
• v.21 no.1
• /
• pp.67-76
• /
• 2017

Recently, the Ministry of Education is pursuing various educational reforms for the cultivation of creative talent in preparation for the fourth industrial revolution. In this study, we developed STEAM program using the info-graphic and 3D modeling. As a result of applying the developed STEAM program to 2 classes of 6 grade in ${\circ}{\circ}$ elementary school in Seoul, it showed that creative problem solving ability of all students participating in the program has improved. Particularly, Motivational component has shown the greatest improvement among the creative problem solving ability elements. Through the results of this study, it is expected that various STEAM programs using the infographic and 3D modeling will be developed and applied in the field of elementary school for the cultivation of creative talent with creative thinking ability in preparation for future society.

• The KIPS Transactions:PartD
• /
• v.16D no.3
• /
• pp.381-394
• /
• 2009

As a technique to enhance reusability for the created artifacts in software modeling process, the model driven method such like MDA has been applied. Unfortunately, the hierarchical and systematic MDA based development technique using UML is poor yet. This causes the problem that the MDA modeling with high consistency and reusability based on MDA metamodel is not being realized. To solve this problem, this paper proposes a MDA (PIM/PSM) component modeling technique using 2+1 view integrated metamodel. At first, the meta-architecture view model which can represents development process view and MVC view is defined. Then, the hierarchical integrated metamodels per view are addressed separately for modeling process and MVC at metamodel level on the hierarchy of the defined meta-architecture view model. These metamodels are defined hierarchically by layering the modeling elements in PIM and PSM pattern for UML models and GUI models. Appling the proposed metamodel to an ISMS application system, it is shown as a component modeling case study based on MDA. Through this approach, we are able to perform a component model with consistency and hierarchy corresponding to development process and MVC way. Accordingly, this may improve more independence and reusability of model.

• Journal of the Korea Concrete Institute
• /
• v.21 no.2
• /
• pp.153-158
• /
• 2009

Using non-invasive surface measurement method, the corrosion state of steel embedded inside concrete can be measured by placing four electrodes on the surface of concrete. Modeling of such measurements can provide valuable information as how interfacial impedance between corroded steel and surrounding concrete results in measured impedance on the concrete surface. In this paper, the modeling of surface measurement technique is used for the determination of the sensitivity of the measurements with respect to steel bar size embedded inside concrete and cover thickness. Modeling results indicated that steel bar sizes varied from D10 to D35 could be identified. Concrete cover thickness changes from 0.02 m to 0.1 m was also distinguished using the modeling scheme. The results confirm this modeling technique is capable of determining steel bar sizes and cover thickness, as well as simulating corrosion responses.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2007

In this paper, we propose a new 3D modeling and rendering system using multiple stereo cameras. When target objects are captured by cameras, each capturing PC segments the objects and estimates disparity fields, then they transmit the segmented masks, disparity fields, and color textures of objects to a 3D modeling server. The modeling server generates 3D models of the objects from the gathered masks and disparity fields. Finally, the server generates a video at the designated point of view with the 3D model and texture information from cameras.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.890-898
• /
• 2001

4H-SiC(silicon carbide) MESFET large signal model was studied using modified Materka-Kacprzak large signal MESFET model. 4H-SiC MESFET device simulation have been conducted by Silvaco\`s 2D device simulator, ATLAS. The result is modeled using modified Materka large signal model. simulation and modeling results are -8 V pinch off voltage, under V$\_$GS/=0 V, V$\_$DS/=25 V conditions, I$\_$DSS/=270 mA/mm, G$\_$m/=52.8 ms/mm were obtained. Through the power simulation 2 GHz, at the bias of V$\_$GS/-4 V md V$\_$DS/=25 V, 10 dB Gain, 34 dBm (1dB compression point)output porter, 7.6 W/mm power density, 37% PAE(power added efficiency) were obtained.7.6 W/mm power density, 37% PAE(power added efficiency) were obtained.d.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.129-136
• /
• 2017

3D seismic data processing methods such as full waveform inversion or reverse-time migration require 3D wave propagation modeling and heavy calculations. We compared efficiency and accuracy of a Xeon Phi coprocessor to those of a high-end server CPU using 3D frequency-domain wave propagation modeling. We adopted the OpenMP parallel programming to the time-domain finite difference algorithm by considering the characteristics of the Xeon Phi coprocessors. We applied the Fourier transform using a running-integration to obtain the frequency-domain wavefield. A numerical test on frequency-domain wavefield modeling was performed using the 3D SEG/EAGE salt velocity model. Consequently, we could obtain an accurate frequency-domain wavefield and attain a 1.44x speedup using the Xeon Phi coprocessor compared to the CPU.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.35-46
• /
• 2013

A parametric modeling method, one of the core technology of BIM (Building Information Modeling), is proposed for efficient 3D assembly design among components of a superstructure module of modular steel bridge. Assembly system is classified into 3 levels as LoD (Level of Details) for 3D assembly design of the parts. Components forming 3D shape of the parts are identified and defined as parameters, variables depending on parameters, or constants independent of the parameters. Then, spatial assembly rules among the parts are defined according to the assembly system. Positional relations among the identified shape components are defined for mating spatial position and geometrical relations are defined for constraining degree of freedom on X, Y, and Z axis. Finally, a standardized template is designed by applying the rules to 3D based assembly design for the parts of the superstructure module. In addition, applicability of the parametric modeling method is demonstrated by testing the shape variation of the superstructure module according to changing the defined parameters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1141-1147
• /
• 2012

Electromagnetic analysis to design unclonable PUFs with frequency-dependant materials with Debye dispersion was considered. To simulate FDTD calculations consider that 1-D problem of pulsed plane wave traveling in free space normally incident on air-silicon material interface on dielectric substrate. The pulse traveling wave at a vacuum-medium interface was reflected, and transmitted wave was dissipated. As a result, 1-D PUF modeling with Debye dispersion on dielectric substrate structure can be applied and FDTD calculation for PUF modeling is a good approximation.

• Journal of KIISE:Software and Applications
• /
• v.33 no.9
• /
• pp.741-750
• /
• 2006

In this paper, we propose a method for reconstructing a 3D object (or a set of objects) from a 2D drawing provided by a designer. The input 2D drawing consists of a set of contours that may partially overlap each other or be self-overlapping. Accordingly, the resulting 3D object(s) may occlude each other or be self-occluding. The proposed method is composed of three major steps: 2D contour analysis, 3D skeleton computation, and 3D object construction. Our main contribution is to compute the 3D skeleton from the self-intersecting 2D counterpart. We formulate the 3D skeleton construction problem as a sequence of optimization problems, to shape the skeleton and place it in the 3D space while satisfying C1-continuity and intersection-free conditions. Our method is mainly for a silhouette-based sketching interface for the design of 3D objects including self-intersecting objects.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.65-67
• /
• 2017

Various combustion modeling approaches have been developed and verified in a combustion system such as rockets, gas turbines, and so on. This study introduces basic theory and recent research activities on 1D network model where a system is divided into a series of acoustic element and mass/momemtum/energy conservations are applied in the component. Each component is connected to the neighboring ones with proper jump conditions. Flame transfer function and acoustic transfer function are determined and effects of the each function on the system instability is investigated.