• Title/Summary/Keyword: 1 step protection

Search Result 136, Processing Time 0.027 seconds

Design and Fabrication of an Electronic Ballast for Short-Arc Lamps (Short-Arc 램프용 전자식 안정기의 설계 및 제작)

  • Kim Il-Kwon;Han Ju-Seop;Kil Gyung-Suk
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.10 no.4
    • /
    • pp.652-658
    • /
    • 2006
  • This paper deals with an electronic ballast for hish intensity short-arc discharge lamps, which consists of a boost converter, a step down converter operated as a current source with power regulation and a low frequency inverter with external ignition circuit The ignition circuit generates high voltage pulses of 130[Hz] up to 5 [kV]. A reignition circuit is equipped in the ballast, and it operates the lamp at a regular interval for protection when an ignition fails. Acoustic resonance phenomenon was eliminated by operating a low frequency square wave voltage and current. The measured lamp voltage, current and consumption power were 123.8 [V], 8.1 [A] and 1,002 [W], respectively. From the experiment, we confirmed that the prototype ballast operates the lamp with a constant power.

A Studies of Uranium Isotopes Determination in Environmental Samples Using TBP Extraction (TBP 용매추출법을 이용한 토양시료중 우라늄 동위원소 분석법 개선에 대한 연구)

  • Lee, Myung-Ho;Choi, Geun-Sik;Cho, Young-Hyun;Lee, Chang-Woo;Jung, Sung-Tae
    • Journal of Radiation Protection and Research
    • /
    • v.24 no.1
    • /
    • pp.1-7
    • /
    • 1999
  • Using the TBP slovent extraction method, a simple and precise method for determining uranium isotopes in the environment samples was developed. The soil sample was decomposed with $HNO_3$ and HF. Uranium isotopes were extracted with 15% TBP in $CCl_4$ from aqueous phase to organic phase, and Th fraction was removed with 8M HCl. Uranium fraction was purified in back extraction step with 1M HCl. Optimized electrode position conditions of uranium Isotopes were set using a new electrode position solution including a DTPA chelating agent. The new method of uranium isotopes determination was validated with a result of application to IAEA Reference Soils.

  • PDF

Porcine Knock-in Fibroblasts Expressing hDAF on α-1,3-Galactosyltransferase (GGTA1) Gene Locus

  • Kim, Ji-Woo;Kim, Hye-Min;Lee, Sang-Mi;Kang, Man-Jong
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.25 no.10
    • /
    • pp.1473-1480
    • /
    • 2012
  • The Galactose-${\alpha}1$,3-galactose (${\alpha}1$,3Gal) epitope is responsible for hyperacute rejection in pig-to-human xenotransplantation. Human decay-accelerating factor (hDAF) is a cell surface regulatory protein that serves as a complement inhibitor to protect self cells from complement attack. The generation of ${\alpha}1$,3-galactosyltransferase (GGTA1) knock-out pigs expressing DAF is a necessary step for their use as organ donors for humans. In this study, we established GGTA1 knock-out cell lines expressing DAF from pig ear fibroblasts for somatic cell nuclear transfer. hDAF expression was detected in hDAF knock-in heterozygous cells, but not in normal pig cells. Expression of the GGTA1 gene was lower in the knock-in heterozygous cell line compared to the normal pig cell. Knock-in heterozygous cells afforded more effective protection against cytotoxicity with human serum than with GGTA1 knock-out heterozygous and control cells. These cell lines may be used in the production of GGTA1 knock-out and DAF expression pigs for xenotransplantation.

Social Safty Measures against Creutzfedt-jakob's and Mad Cow Disease (광우병과 크로이츠펠트 야콥병의 사회안전위협에 대한 안전대책)

  • Kim, Doo-Hyun;Kim, Jung-Hyun
    • Korean Security Journal
    • /
    • no.4
    • /
    • pp.29-46
    • /
    • 2001
  • This research is based on the protection of the social safty with the preventive measures against Creutzfedt-jakob's and Mad cow Disease which has been drawn an attention of the public. It also has Known as an epidemic with rapid transmission an severe conteminaton to hurt the health through beef. In this work, some fruitful suggestions have been made to prevent and to minimize the harms Creutzfedt-jakob's and Mad Cow Disease : 1) We should Pay attention to the prior preventive measures by detecting the modes and the causes of the contemination lute route ; 2) there should be a step to inoculate the cattles to provide non-conteminated fresh feed for cows ; and 3) a health official should be alert to prevent the rapid transmission to the public by breaking the infected route of it.

  • PDF

Design of the Ground Resistance Measuring System to the Earth-Noise

  • Jung Min-Jae;Joo Hyung-Jun;Lee Ki-Hong;Oh Sung-Up;Jung Jae-Ki;Seong Se-Jin
    • Proceedings of the KIPE Conference
    • /
    • 2001.10a
    • /
    • pp.566-570
    • /
    • 2001
  • Generally, grounding systems are responsible for the safe operation of a power system. Their performance guarantees equipment protection and personnel safety under condition of the limited ground potential rise and touch voltages as well as step voltages under ground fault conditions. Therefore, it is necessary to measure the ground resistance frequently for checking the performance of grounding system, In this paper the ground resistance measuring system using digital signal processor and high-performance L-C resonant band pass filter is presented. The signal current magnitude for measuring ground resistance in this system is $10^{-1}[A]\;to\;5\times10^{-2}[A]$ and the current frequency is 30[Hz].

  • PDF

Development of 60KV Pulsed Power Supply using IGBT Stacks (IGBT 직렬구동에 의한 60KV 펄스 전원장치 개발)

  • Ryoo, Hong-Je;Kim, Jong-Soo;Rim, Geun-Hie;Goussev, G.I.;Sytykh, D.
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.56 no.1
    • /
    • pp.88-99
    • /
    • 2007
  • In this paper, a novel new pulse power generator based on IGBT stacks is proposed for pulse power application. Because it can generate up to 60kV pulse output voltage without any step- up transformer or pulse forming network, it has advantages of fast rising time, easiness of pulse width variation and rectangular pulse shape. Proposed scheme consists of series connected 9 power stages to generate maximum 60kV output pulse and one series resonant power inverter to charge DC capacitor voltage. Each power stages are configured as 8 series connected power cells and each power cell generates up to 850VDC pulse. Finally pulse output voltage is applied using total 72 series connected IGBTs. To reduce component for gate power supply, a simple and robust gate drive circuit is proposed. For gating signal synchronization, full bridge invertor and pulse transformer generates on-off signals of IGBT gating with gate power simultaneously and it has very good characteristics of short circuit protection.

Effects of Ground Faults on the Safety of Persons and Low-voltage Installations in 22.9 kV-Y Distribution Systems (22.9 kV-Y 계통에서 지락고장이 인체 및 저압설비의 안전에 미치는 영향)

  • Kim, Han-Soo;Chung, Jae-Hee;Kang, Kae-Myung
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.22 no.1
    • /
    • pp.141-148
    • /
    • 2008
  • This paper presents experimental results on the safety of persons and protection of low-voltage equipments of the sub-station due to a single-phase ground fault in 22.9 kV-Y distribution system. In order to evaluate the hazard voltages and the stress voltage of the low-voltage(LV) equipment due to faults between high-voltage systems and earth based on the newly prescribed KS C IEC 60364 standard series, the verification tests in a 22.9[kV] neutral multiple grounding system were carried out. From the experimental results, we introduce serious problems causing some discomfort when applying KS C IEC 60364 standard series to the existing domestic distribution system and the effective protective measures against temporary overvoltages due to a ground fault in the common grounding which is combined the 22.9 kV-Y grounding and the customer's installation grounding are proposed. As a consequence, it was found that the equipotential bonding is an important prerequisite for the effectiveness of the protective measures for the safety of persons and LV equipment in the combined 22.9 kV-Y and low-voltage grounding system.

Microbial Population of Foodborne Pathogens during Fermentation of Mulberry Wort (오디 발효액의 발효기간 동안 식중독 세균수의 변화)

  • Han, Sanghyun;Ryu, Song Hee;Park, Woonra;Lim, Euna;Kim, Se-Ri;Kim, Won-Il;Yun, Bohyun;Kim, Hyun-Ju;Ryu, Jae-Gee
    • Journal of Food Hygiene and Safety
    • /
    • v.31 no.6
    • /
    • pp.458-464
    • /
    • 2016
  • Mulberry is considered a healthy food for antioxidants and many other beneficial nutrients. However, food safety concerns exist as this commodity scarcely passes through a sanitizing step due to the fragile nature of mulberry fruits. Fermented mulberry wort is one traditional way to utilize and preserve mulberries by mixing with sugars although hygienic practices are not often implemented. The purpose of this study was to investigate the fate of foodborne pathogens in fermented mulberry wort. Microbial population of inoculated E. coli in mulberry wort showed a decreasing pattern as the fermentation progressed. A quicker decrease was observed in the mulberry wort mixed with sugar at 1 to 0.8 ratio (w/w, mulberry: sugar) compared to 1 to 1 ratio, which could be due to the amount of acids generated during the fermentation process. When fully-fermented mulberry wort was contaminated with foodborne pathogens, they all decreased in population although their deceasing patterns varied depending on the species of tested bacteria. Steep deceases in population of inoculated foodborne pathogens were observed when the fermented wort was stored at $30^{\circ}C$ in comparisons to the other storage temperature, 5 and $20^{\circ}C$, regardless of bacterial species. This study necessitates the optimization of a sanitizing process during fermentation and storage of mulberry wort.

A Study on the behaviour of Cavitation erosion and lubricating Oils and the influence of Corrosion on Slide Bearing Metals for Internal combustion Engine (내연기관용 슬라이드 베어링재의 케비테이션 침식거동과 부식영향 및 윤할유의 거동에 관한 연구)

  • Lee, Jin-Yeol;Im, U-Jo
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.28 no.2
    • /
    • pp.171-183
    • /
    • 1992
  • In this paper, the behaviour of cavitation erosion, influence of corrosion and corrosion control on slide bearing metals for internal combustion engine were investigated, and this experiment was done by the vibratory cavitation erosion tester. The main results obtained are as follows: 1. With decreasing the space between horn and specimen, the weight loss and its rate increased step by step. But the weight loss and its rate of 0.2mm space decreased conversely more than that of 0.4mm space at early stage. 2. The weight loss and its rate with change of pH were appeared to the order of pH2>pH12>pH7>pH4. And the weight loss and its rate at pH 4 decreased at best. 3. The weight loss and its rate by cavitation erosion for bearing metals were shown to the order of W.M7>W.M1>K.M4. 4. There appeared mainly small pit hole at pH2, and appeared the pit of netting thread type at pH12 by the results of the damaged surfaces at pH2 and pH12 environments that were sensitive to cavitation erosion. 5. With increasing the viscosity of lubricating oil, the weight loss rate by cavitation erosion became dull at the space below 0.5mm. 6. The protective efficiency of cavitation erosion-corrosion is superior inhibitor of chormate(25 ppm) to cathodic protection.

  • PDF

A Study on Characteristic Analysis for Indoor Ventilation Performance of Mechanical Ventilation System (기계 환기시스템의 실내 환기성능 특성 해석에 관한 연구)

  • Ku, Jae-Hyun
    • Journal of the Korean Institute of Gas
    • /
    • v.16 no.2
    • /
    • pp.31-37
    • /
    • 2012
  • This paper describes to analyze the ventilation performance of a room air conditioner for indoor comfort control. An experimental apparatus consists of a test room, the room air conditioner, a tracer gas measurement system, a supply fan and a controller. Ventilation performance as a function of human occupancy is evaluated with supply ventilation air using a tracer gas technique of CO2 gas in the test room. The ventilation performance is evaluated in a step-down method based on ASTM Standard E741-83 and is found to increase with increasing supply ventilation rate. The CO2 gas concentration is decayed rapidly without human occupancy. The ventilation performance without human occupancy increases up to 55% and the ventilation performance with one person increases up to 25% at the supply air of 570 lpm comparing with a natural reduction after one hour. A modeling for ventilation performance of a room air conditioner in a test room is presented using experimental datum.