• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.284-284
• /
• 2017

최근 한강, 낙동강, 금강, 영산강 등 주요 하천에 설치된 다기능 보는 평수위 및 홍수위의 수위차를 상당히 감소시켰으며, 가동보 운영으로 홍수초기 일정기간동안 수위를 조절할 수 있으므로 친수 목적으로 활용할 수 있는 고수부지 공간과 보로 인하여 유지되는 수면공간 등 새로운 가치를 창출할 수 있는 하천공간이 조성되었다. 새롭게 펼쳐진 하천공간을 다양한 여가 및 문화활동 공간으로 이용하고자 하는 국민적 요구가 증가함에 따라 공원 캠핑장 자전거도로 등 하천내 친수지구를 안전하게 관리해야할 필요성 또한 증가되었으므로, 본 연구에서는 영산강 친수지구를 대상으로 침수예측 현황 및 개선방안을 검토하였다. 지금까지의 국내 하천 홍수관리 정책은 하천의 홍수피해로부터 하천변 저지대의 범람피해를 최소화하는 방향으로 추진되었다. 이에 따라 홍수예보 또한 홍수주의보, 홍수경보 등 비교적 규모가 큰 홍수를 대상으로 사전에 예측하여 발령함으로써 홍수피해를 대비하는 것이 목적이었다. 그러나 하천 친수지구 침수는 지금까지의 홍수예보와는 대상홍수 유량규모에서부터 큰 차이를 나타낸다. 본 연구에서는 친수지구 지형 반영 개선, 지류 유입량의 민감도 분석을 통한 주요 지류유입 유량의 정확도 개선, 다기능 보 운영에 따른 보 배수영향의 반영 등을 통하여 현재 국토교통부의 홍수예측 모형인 FLDWAV 모형의 홍수위 예측 정확도를 개선하였다. 그 결과, 황룡강 합류 상류구간과 하류구간 모두 침수시작 시점의 포착, 수위수문 곡선의 형태 등 다양한 관점에서 수위해석의 정확도가 개선되었다. 삼지 지점의 경우, 홍수초기 수위해석 오차가 크게 줄어서 RMSE가 1.33m에서 0.30m 홍수해석 정확도가 개선되었으며, 광주지점의 경우의 RMSE는 1.60m에서 0.56m로 개선되었다. 황룡강 합류 하류 지점인 본동과 나주지점의 RMSE는 각각 0.30m, 0.39m에서 0.02m, 0.42m로 수정되었으며, 나주지점의 경우 저유량 규모에서 모형의 보정이 좀 더 수행될 필요가 있음을 확인하였으나 침수시점의 포착(본동 7.8 EL.m, 나주 4.0 ELm)에서 크게 개선됨을 확인하였다.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.303-308
• /
• 2011

The present study has been carried out to predict the heat transfer characteristics of reverse heat loss method for a residential refrigerator by using numerical analysis and corresponding experiment. From the measured values of temperature and heat input, one can conclude that, the temperature inside the refrigerator has a nearly linear relationship with heat input. The effect of gasket heat loss was examined with the change of thermal conductivity of gasket region. The appropriate thermal conductivity of gasket region was acquired from the comparison of heat losses with the experimental result and numerical analysis. The result of calculated heat losses had accuracy within 1.8% error with the experimental result. With the selected thermal conductivity of gasket region, the effectiveness of reverse heat loss method was examined with the change of thermal conductivity of vacuum insulation panel.

• Journal of Radiation Protection and Research
• /
• v.12 no.1
• /
• pp.34-39
• /
• 1987

Radiation shielding analysis for a 6MeV X-ray facility was carried out. The primary and leakage radiation for the facility can be evaluated based on the methodology in NCRP No. 49 and 51. The present study deals with radiation scattering analysis for the outside and inside door of the facility based on the albedo concept. The calculated dose rates were compared with the results of MORSE-CG code calculation and the measured data, resulting in a good agreement, even though there existed some deviation for the inside door. These results can be utilized to the radiation shielding design of the medical and industrial X and gamma ray facilities, and to the safety evaluation of these facilities.

• Journal of Broadcast Engineering
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2003

In this paper, we introduce a novel signal quality enhancement algorithm with a perceptual interference analysis and perceptual convolutional noise suppression. A perceptual convolutional noise is reflected in the audible disturbance that can still be recognized after the additional noise suppression and tonality change which is caused by the noise energy excitation. The enhancement system is organized with a perceptual additional noise suppression part and a perceptual convolutional noise suppression part. Experimental results show that these two parts have an equivalent quality enhancement performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.815-823
• /
• 1993

In this paper, the structure of modified multiplication-free adaptive filter(M-MADF) and convergence analysis are presented. To evaluate the performance of proposed M-MADF algorithm, fractionally spaced equalizer (FSE) is used. The input signals are quantized using DPCM and the reference signals is processed using a first-order linear prediction filter, and the outputs are processed by a conventional adaptive filter. The filter coefficients are updated using the Sign algorithm. Under the assumption that the primary and reference signals are zero mean, wide-sense stationary and Gaussian, theoretical results for the coefficient misalignment vector and its autocorrelation matrix of the filter are driven. The convergence properties of Sign. MADF and M-MADF algorithm for updating of the coefficients of a digital filter of the fractionally spaced equalizer (FSE) are investigated and compared with one another. The convergence properties are characterized by the steady state error and the convergence speed. It is shown that the convergence speed of M-MADF is almost same as Sign algorithm and is faster that MADF in the condition of same steady error. Especially it is very useful for high correlated signals.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.271-277
• /
• 2020

There are increasing cases of monitoring the structural response of structures using multiple sensors. However, owing to cost and management problems, limited sensors are installed in the structure. Thus, few structural responses are collected, which hinders analyzing the behavior of the structure. Therefore, a technique to predict responses at a location where sensors are not installed to a reliable level using limited sensors is necessary. In this study, a numerical study is conducted to predict the seismic response of low-rise buildings using limited information. It is assumed that the available response information is only the acceleration responses of the first and top floors. Using both information, the first natural frequency of the structure can be obtained. The acceleration information on the first floor is used as the ground motion information. To minimize the error on the acceleration history response of the top floor and the first natural frequency error of the target structure, the method for predicting the mass and stiffness information of a structure using the genetic algorithm is presented. However, the constraints are not considered. To determine the range of design variables that mean the search space, the parameter prediction method based on artificial neural networks is proposed. To verify the proposed method, a five-story structure is used as an example.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.713-724
• /
• 2004

A fatigue crack found at the coped stringer of the old dismantled Dangsan Subway Bridge was numerically simulated. A model of a single span of the plate girder bridge with its beam elements was created and analyzed in order to obtain the nominal stress history caused by trains. A detailed FEM analysis of the coped stringer was conducted using a shell element model. A fracture mechanical model was used to estimate crack propagation. The stress intensity factors were calculated using the J-Integral method. The simulation with some reasonable assumptions showed that the calculated crack lengths were comparable to those found on the site.

• Journal of Korea Water Resources Association
• /
• v.54 no.5
• /
• pp.335-345
• /
• 2021

The one-dimensional solute transport models have been developed for recent decades to predict behavior and fate of solutes in rivers. Transient storage model (TSM) is the most popular model because of its simple conceptualization to consider the complexity of natural rivers. However, the TSM is highly dependent on its parameters which cannot be directly measured. In addition, the TSM interprets the late-time behavior of concentration curves in the shape of an exponential function, which has been evaluated as not suitable for actual solute behavior in natural rivers. In this study, we suggested a stochastic approach to the solute transport analysis. We delineated the model development and model application to a natural river, and compared the results of the proposed model to those of the TSM. To validate the proposed model, a tracer test was carried out in the 4.85 km reach of Gam Creek, one of the first-order tributaries of Nakdong River, South Korea. As a result of comparing the power-law slope of the tail of breakthrough curves, the simulation results from the stochastic storage model yielded the average error rate of 0.24, which is more accurate than the 14.03 and 1.87 from advection-dispersion model and TSM, respectively. This study demonstrated the appropriateness of the power-law residence time distribution to the hyporheic zone of the Gam Creek.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.107-114
• /
• 2018

Korea Space Launch Vehicle (KSLV)-I flight test data and the modified 1-dimensional steady state modeling data from the critical design results of the KSLV-II liquid oxygen filling system operation are compared to validate the reliability of critical design modeling. A comparison of major flow rates and pressure values between test data and calculation results are conducted. The relative errors relative to maximum total flow rate for each cooling, filling, and replenishment mode are determined within 6.7%. Calculated pressure values at the outlet of the pump and the inlet of flow control valves are within 5.1%. The pressure at the inlet of the launch vehicle for each operation mode are within the measured pressure range.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.353-356
• /
• 2005

In this paper, the proposed $gamma({\gamma})$ line system is developed for reducing the error between non-linear gamma curve produced by a formula and result produced by hardware implementation. The proposed algorithm and system is based on the specific gamma value 2.2, namely the formula is represented by {0,1}$^{2.2}$ and the bit width of input and out data is 10bit. In order to reduce the error, the system is using least squares polynomial of the numerical method which is calculating the best fitting polynomial through a set of points. The proposed gamma line is consisting of nine kinds of quadratic equations, each with their own overlap sections to get more precise. Based on the algorithm verified by $MATLAB^{TM}$ 7.0, the proposed system is implemented by using Verilog-HDL. The proposed system has 2 clock latency; 1 result per clock. The error range (LSB) is -4 and +3. Its standard deviation is 1.287956238. The total gate count of system is 2,083 gates and the maximum timing is 15.56[ns].