• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.503_504
• /
• 2009

마이크로그리드는 계통에 연계되어 부하에 전력을 공급하게 되며, 필요에 따라 독립운전이 가능한 충분한 용량을 가진 2대 이상의 마이크로소스와 저장정치, 그리고 부하가 혼재된 하나의 독립된 전력망으로 정의된다.[1][2] 마이크로그리드가 계통과 연계운전 중 계통측 사고로 인하여 독립운전 모드로 전환되었다가 계통측 사고복구가 되면 다시 연계운전을 하게 된다. 마이크로그리드는 계통과의 재동기화 시 마이크로그리드와 계통의 전압위상차에 따라 스위칭 과도현상이 크게 발생한다.[2] 이 논문은 마이크로그리드의 계통 재동기화 시 SS(Static Switch)의 스위칭 과도현상을 줄이기 위한 기존 방법들의 문제점을 분석하고, 이러한 문제점들을 해결할 수 있는 새로운 방법을 제안하였다. 제안한 방법은 전력계통 과도현상 해석 툴인 EMTP/RV를 이용한 시뮬레이션을 통하여 타당성을 검증하였다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11a
• /
• pp.175-178
• /
• 2003

최근에 표준화가 완료된 차세대 비디오 코딩 표준인 H.264 는 적은 비트율에서 높은 품질의 비디오 압축을 목표로 하기 때문에, H.263+ 및 MPEG-2/4 와 같은 이전의 표준들보다 훨씬 더 많은 연산을 필요로 한다. 본 논문은 SIMD (Single Instruction Multiple Data) 명령어를 가지는 범용 프로세서(예를 들면, 펜티엄 4)에서 H.264 S/W 인코더의 속도 최적화를 위한 알고리듬 및 구현 기술을 제안한다. 화질 저하 없이 RDO (Rate Distortion Optimization) 의 속도를 높일 수 있는 효율적인 모드 검색 건너뛰기 알고리듬을 제안하고, SIMD 명령어를 이용하여 1/4 화소 보간, SAD(Sum of Absolute Difference), SATD(Sum of Absolute Transformed Difference), SSD (Sum of Squared Difference) 등의 개별 루틴의 속도를 최적화한다. 일련의 최적화 후에 인코더는 화질 저하 없이 H.264 레퍼런스 인코더보다 평균 3배 정도의 속도 향상이 이루어진다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.461-462
• /
• 2009

Since the modal pushover analysis (MPA) is introduced by A.K.Chopra in 2002, it has been the leading procedure for the seismic evalution of structures. However it has scarcely used on bridge structures dueing to its inherent limitation. In this paper, MPA is applied on cable-stayed bridges to check its applicability on such structures.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.2
• /
• pp.13-18
• /
• 1998

In this paper, a new type microstrip directional coupler has been designed and a 3dB coupler has been fabricated and measured. The measured and analysed results are agree well each other except difference of 1 dB insertion loss. There are two eigenmodes, e.g. even and odd mode in coupled microstrip lines. By using the difference between these two eigenmodes phase constants, the directional coupler can be designed by adjusting coupling length, which has a desired coupler has a disdvantage that its coupling length is longer than conventional oe, but it may be used as a useful coupler in millimeter wave range. And it has the merit of less discontinuity effects, becuase it is simpler than the other couplers in structure.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.91-100
• /
• 1995

This paper represents the lateral first-order mode characteristics for the semiconductor laser diodes using a two-dimensional numerical simulator. In order to analyze the lateral first-order mode characteristics, Helmholtz wave equation is solved twice for the lateral fundamental and the first-order mode considering the mode gain, total losses, and the recombination rate due to the stimulated emission radiation for the each mode independantly. Through this procedure, we find that the lateral first-order mode was easily guided as increasing the stripe width for the index-guiding structures, and that the lateral first-order mode seems to be dominated in the distribution of total light intensity when its output power reaches nearly half of that of the lateral fundamental mode. This results may be used to design the device structure which guides only the lateral fundamental mode.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.119-121
• /
• 2006

본 논문은 중 전력, 고 입력 전압응용에서 많이 이용되는 비대칭 하프브릿지 PWM DC-DC 컨버터의 다중 출력 구성을 위한 최적의 설계 방식을 제안한다. 제안된 방식은 기본 PWM에서 부하에 따른 연속전류동작모드(CCM)의 구간을 늘여, 제어되는 전원의 부하 변동이 크더라도, 다중출력 되어지는 전원의 정상상태 동작점의 변동이 크게 발생하지 않도록 한다. 제어되는 비대칭 하프브릿지(ASHB)의 부하에 따른 시비율 변화가 작아지면 경 부하에서 변압기에 인가되는 전압의 크기가 줄어들어 다중 출력 되어지는 단의 전체적인 전압 스트레스가 감소한다. 또한 제안된 방식의 비대칭 하프브릿지 회로는 기존의 1차 측 전류 비대칭성을 보상하여 보다 넓은 부하 영역에서 영전압 스위칭이 가능하며 스위칭 손실과 이에 의한 EMI가 감소하게 된다. 제안된 방식은 기존 하드웨어와 비교하여 그 성능을 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.62-68
• /
• 1996

Linear controllers, such as LQG/LTR controller, have been investigated to control flexible link manipulators. The performance and complexity of these depend largely on the linearized model upon which the controller is designed. In this study, singular perturbation model is tested in designing a LQG/LTR controller for a flexible link manipulator. The order of the resulting controller is much lower than the one based on a full model. Through numerical study, it is shown that the performance of the proposed controller reaches reasonably to the one based on the full model.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.459-466
• /
• 2002

The purpose of this study is to propose a new method for evaluating equivalent damping ratios of a structure with supplemental damping devices to assess their control effect quantitatively. A MDOF system is transformed to an equivalent SDOF system based on the assumption that the first mode dominates structural response. Approximate closed-form formulas for the evaluation of the first damping ratio are presented for various damping devices. Through numerical analysis of a ten-story building equipped with damping devices, the effectiveness of equivalent SDOF model and closed form formulas are verified.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1112-1118
• /
• 1990

The end tip position control of a flexible robot arm has been presented by utilizing the feedback signal from the rate-gyro mounted at the end tip. Kalmann filter and the state feedback gains were determined by optimal sense based upon the parameter from the geometrical and electrical data of the flexible arm system. The simulation and experiment were performed and it has been proved that implementation of the rate-gyro drastically improves the performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6A
• /
• pp.409-415
• /
• 2011

Optimization Analysis of angle-ply laminated shells, having one pair of opposite edges supported, are investigated on the basis of the first-order shear deformation theory. The equations of motion of the shell are solved by the use of ritz method. A range of results are presented for composite shells to show the effects of lamination angle and number of layers on natural frequency. In addition, an analysis of the strain energy distributions is used as an aid for the better understanding of the vibration characteristics of the shells.