Journal of Advanced Marine Engineering and Technology
/
제18권2호
/
pp.25-32
/
1994
The characteristics of the R-22 two-stage compression refrigeration systems were investigated. The apparatus consisted of 0.5HP and 1HP hermetic reciprocating compressors for the high and low stage sides respectively, a condenser, an evaporator, a heat exchanger, four expansion valves, and two intercoolers. The experiments covered a range of refrigerant flow rates from 24 to 84kg/h, and the inlet temperature of cooling water in the condenser and heat source water in the evaporator ranged from 20 to 30$^.\circ}C$The results Showed that the refrigerant flow rate had greater effect on the refrigerating capacities, the compression efficiency and the coefficient of performance of two-stage compression systems than the inlet temperature of heat source water. And all these values were decreased with increasing inlet temperatures of the cooling water. The pressure drops in the evaporator of two-stage compression systems were decreased in proportion to the increase in the inlet temperature of the heat source and cooling water, but it was increased by the refrigerant flow rate.
A preliminary performance test of a 30RT 2-stage screw heat pump was carried out in order to develop a high performance large-scale unutilized energy source heat pump, which will be used in district heating and cooling. Two issues on the system control were investigated in this study, A stable 2-stage heating operation is guaranteed only if the load-side water inlet temperature is over a certain value, to where the 1-stage heating operation should be done first from a cold start. An oil shortage problem in low stage compressor, which depends on the degree of suction superheat, was solved by the proper oil level control scheme.
본 연구에서는 2중 효용 증발관을 이용하여 21.0 wt%의 NaCl 수용액에서 고형물의 NaCl을 $1,524.58kg\;h^{-1}$만큼 석출시키는 공정에 대해서 증기 재압축을 활용하여 스팀 소모량을 $3,139kg\;h^{-1}$에서 $496kg\;h^{-1}$로 줄이는 공정에 대한 전산모사 및 최적화 작업을 수행하였다. 디에틸렌 글리콜(diethylene glycol)을 포함한 NaCl 수용액을 농축시키기 위한 증발농축 공정의 전산모사를 위해서는 AspenTech사의 Aspen Plus V8.8을 활용하였으며, 중간에 냉각기를 가지는 증기 재압축 공정의 전산모사를 위해서는 Schneider Electric사의 PRO/II with PROVISION V9.4를 이용하였다. 증기 재압축 공정에 대해서는 1기의 압축기를 사용한 공정과 중간에 냉각기를 가지는 2단 압축 공정을 상호 비교하였다.
$MoS_2$ 단분자층에 SiC 단분자층을 결합하여 헤테로 구조를 만들고 여기에 양축 스트레인을 가하여 분석하였다. 그 결과 1% 이상의 인장 스트레인이 가해질 경우 직접 밴드갭이 유도 되었으며 압축 스트레인에 비하여 인장 스트레인이 가해졌을 때 벤드갭의 변화가 컸다. 따라서 다음 헤테로 구조에 가해지는 인장 스트레인에 따라 변화되는 전자기적 특성은 광학 소자등의 다양한 분야에 활용할 수 있을 것이다.
비압축 영상의 무선 전송은 압축된 영상의 전송과 비교해서 높은 영상 품질과 낮은 지연을 보장한다. 비록 현재의 무선 전송 기술로는 수 Gb/s에 이르는 Full HD급의 영상을 전송하기는 어렵지만 ultra-wideband (UWB)와 같은 몇 가지 종류의 무선 기술은 1 Gb/s의 데이터 전송율을 보장하며 이를 이용하여 휴대용 멀티미디어 기기에서 비압축 영상 전송 서비스를 제공할 수 있다. 본 논문에서는 휴대용 멀티미디어 기기에서의 무선 영상 미러링 서비스를 위한 비압축 영상 전송 시스템을 제안한다. 먼저 단일 또는 다수의 1 Gb/s UWB 기술을 이용한 비압축 영상 전송 성능을 시뮬레이션을 통해 비교하였고 하드웨어로 구현된 비압축 영상 전송 블록과 Gb/s급 무선 MAC 가속기 블록에 대해 설명하였다. 마지막으로 다중 UWB 물리계층을 사용한 HD급 비압축 영상 전송 시스템의 구현 및 시연에 대해 설명하였다.
영상의 이중 압축 검출은 영상의 위조여부를 판단하는 한가지 효과적인 방식이다. 이러한 이중 압축 검출 기술을 바탕으로 HEVC로 압축된 영상의 진위 여부를 판단하는 다양한 종류의 기존 기술들이 소개되었지만, 동일한 압축 환경에서 이중 압축된 영상의 진위 여부를 검출하는 것은 상당히 어려운 일로 여겨지고 있다. 본 논문에서는 동일 압축 환경에서 HEVC의 이중압축 여부를 판단하는 기술로서, Intra모드로 압축된 영상의 분할 정보를 이용하여 판단하는 방식을 제안한다. Coding Unit (CU)와 Transform Unit (TU)의 분할 정보로부터 통계적 특징과 딥러닝 네트워크 기반의 특징을 우선 추출하고, softmax단에서 추출된 특징들을 통합하여 이중 압축 여부를 판단하는 기술을 제안한다. 실험결과를 통해서 제안하고 있는 기술이 WVGA 영상과 HD 영상에서 각각 87.5%와 84.1%의 정확도를 가지며 효과적으로 검출한다는 것을 보여준다,
배 골판지 포장상자의 진동특성을 계측, 분석하기 위하여 유압가진기을 이용하여 단일 포장상자의 진동실험 및 적재된 포장상자의 진동실험을 위한 시스템을 구성하고 진동특성 계측용 컴퓨터 프로그램을 개발하며 진동실험을 하였으며, 그 결론은 다음과 같다. 1. 유압가진기의 성능실험을 하여 배 골판지 포장상자의 진동실험에 적합한 것으로 나타났다. 2. 단일 배 골판지 포장상자의 피크 주파수는 27.02 Hz이었으며, 피크 가속도는 1.9 G이었다. 3. 적재된 배 골판지 포장상자와 적재 단수별 피크 주파수는 19.02, 18.14, 16.62 및 15.40 Hz이었으며, 피크 가속도는 2.2987, 3.7654, 5.6087 및 7.9852 G이었다. 4. 배의 경우에는 운송시 과도한 진동에 노출되어 손상을 입게 되는데 만약 골판지 상자안의 배가 팰리트 적재로 운송시 15∼20 Hz 주파수 대역의 진동을 하게 되면 포장상자의 최하단에서부터 최상단까지 가속도와 변위가 증가되어 배의 심각한 멍(bruise) 손상을 초라하게 된다. 5. 배 골판지 포장상자의 진동시 최하단의 상자의 경우에는 상단에 위치한 상자로부터 진동에 의한 압축력을 받아 배의 손상 원인이 되었다. 이것은 농산물이 유통중의 진동에 노출되었을 때 농산물의 손상은 최하단의 골판지 포장상자의 압상의 원인이 제일 크다는 것을 알 수가 있었다.
본 논문에서는 멀티웨이브릿 필터뱅크를 이용한 임베디드 제로 트리구조의 영상압축 기법을 제안한다. 멀티웨이브릿은 두 채널의 필터 뱅크를 갖는 새로운 방법의 DGHM스케일링 함수와 웨이브릿 함수를 사용한다. 임베디드 제로 트리 코딩은 영상압축을 위하여 사용한다. 각 스케일링 및 웨이브릿 함수는 두 개의 필터뱅크를 사용한다. DGHM 멀티웨이브릿의 중요한 특성은 직교성과 근사화 차수이다. 본 논문에서 사용한 DGHM 멀티웨이브릿은 근사화 차수가 2인 높은 에너지 압축성과 완전복원을 가진다. DGHM 멀티웨이브릿을 사용한 영상압축은 단일 Daubechies 웨이브릿(D4), 쌍직교 웨이브릿, 및 GHM 멀티웨이브릿 보다 압축율에 대한 우수한 PSNR을 가진다.
MPEG-VCM(Video Coding for Machines)에서는 머신비전(machine vision) 네트워크의 백본(backbone)에서 추출된 이미지/비디오 특징 압축을 위한 표준화를 진행하고 있다. 현재 VCM 표준기술 탐색 과정에서 가장 좋은 압축 성능을 보이는 MSFC(Multi-Scale Feature compression) 기반 압축 네트워크 모델은 추출된 멀티-스케일 특징을 단일-스케일 특징으로 변환하여 특징맵으로 구성하고 이를 VVC 로 압축한다. 본 논문에서는 MSFC 기반 압축 모델에서 Min-Max 값 시그널링을 제외한 최소-최대(Min-Max) 정규화를 포함한 개선된 특징맵 생성 기법을 제시한다. 즉, 제안기법은 VCM 디코더에서의 특징맵 복원을 위한 Min-Max 값을 학습 기반으로 생성함으로써 Min-Max 시그널링의 비트 오버헤드 절감뿐만 아니라 별도의 시그널링 기제를 생략한 보다 단순한 전송 비트스트림 구성을 가능하게 한다. 실험결과 제안기법은 이미지 앵커(Anchor) 대비 BPP-mAP 성능에서 83.24% BD-rate 이득을 보이며, 이는 기존 MSFC 보다 1.74%정도 다소 떨어지지만 별도의 Min-Max 시그널링 없이도 기존의 성능을 유지할 수 있음을 보인다.
In this paper, cycle performance analysis of R744($CO_2$) two-stage compression and one-stage expansion refrigeration system is presented to offer the basic design data for the operating parameters of the system. The operating parameters considered in this study include superheating degree, compressor efficiency, gas cooling pressure, mass flowrate ratio, outlet temperature of gas cooler and evaporating temperature in the carbon dioxide two-stage refrigeration cycle. The main results were summarized as follows : The cooling capacity of two-stage compression and one-stage expansion refrigeration system increases with the increasing superheating degree, compressor efficiency and gas cooling pressure, but decreases with the increasing mass flowrate ratio and evaporating temperature. The compression work of two-stage compression and one-stage expansion refrigeration system increases with the increasing superheating degree, outlet temperature of gas cooler, gas cooling pressure and evaporating temperature, but decreases with the increasing compressor efficiency and mass flowrate ratio. The COP of two-stage compression and one-stage expansion refrigeration system increases with the increasing compressor efficiency, but decreases with the increasing superheating degree, gas cooling pressure, mass flowrate ratio and evaporating temperature. Therefore, superheating degree, compressor efficiency, gas cooling pressure, mass flowrate ratio, outlet temperature of gas cooler and evaporating temperature of R744($CO_2$) two-stage compression and one-stage expansion refrigeration system have an effect on the cooling capacity, compressor work and COP of this system.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.