• Journal of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.170-176
• /
• 1968

In order to attempt the quantitative correlation of nucleophilic addition(not nucleopbilic substitution) reactivity of nucleophile, the addition constants of ethyl and isopropyl mercaptan to 3,4-methylenedioxy-$\beta$-nitrostyrene were determined and found to be $6.82{\times}10^7 $ and $2.86{\times}10^7 M^{-2},\;sec^{-1}$ respectively. From the rate equation obtained, the addition mechanism at basic media especially the complex addition mechanism at acidic media which has not been revealed can also be fully explained.

• Journal of the Korean Ceramic Society
• /
• v.28 no.5
• /
• pp.415-421
• /
• 1991

Influence of Li2O.4B2O3 frit addition on the microstructure and thermal expansion properties of $\beta$-eucryptite ceramics was studied. With 1.0~10.0wt% frit addition, sintering temperature range was enlarged and densified body was obtained. Thermal expansion was increased from -6.67$\times$10-6 $^{\circ}C$-1 of pure sintered body to 1.03$\times$10-6$^{\circ}C$-1 of 6 wt% added body, but this increasement was accompanied by inhibition of thermal expansion anisotropy, so that improved microcracking property.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.709-715
• /
• 2001

We have been studied photosensitization mechanism's additive effect, of perylene 3,4,9,10-tetracarboxyl-diimide and X-phthalocyanine (charge generation materials), using the photochemical and photoelectrochemical approach. It was found that the photoreceptor on the excited state reacts with metal oxide, which creates the charge transfer on the interface of SnO2/electrolyte. In the electrode (X5P1) made of five X-phthalocyanine and single perylene 3,4,9,10-tetracarboxyldiimide layers, the cathodic photocurrent of X-phthalocyanine in the 400-600 nm region was increased by the addition of perylene 3,4,9,10-tetracarboxyldiimide. The maximum wavelength of fluorescence of perylene 3,4,9,10-tetracarboxyldiimide showed no dependence on the temperature. The addition of 4-dibenzylamino-2-methylbenzaldehyde diphenylhydrazone known as charge transport material was represented as decreasing photocurrent for X-phthalocyanine and perylene 3,4,9,10-tetracarboxyldiimide, respectively. In the electrode (X1P1) made of single X-phthalocyanine and single perylene 3,4,9,10-tetracarboxyldiimide layers, an anodic photocurrent of about 10.5 nA was generated by addition of hydroquinone at 550 nm. And the characteristic of photoinduced discharge was shown to decrease by a factor of 5 and the speed of dark decay was increased by a factor of 1.2.

• Journal of Korea Foundry Society
• /
• v.38 no.5
• /
• pp.87-94
• /
• 2018

The effects of Sr and (Ti-B) additives on the tensile properties of AC4A recycled (35% scrap content) aluminum alloys were investigated. An acicular morphology of the eutectic Si phase of as-cast specimens was converted to a fibrous morphology upon the addition of Sr. Moreover, morphology of the Sr modified eutectic Si phase became finer due to a T6 heat treatment. The grain size of the ${\alpha}$-solid solution was decreased by the addition of (Ti-B) additives. Depending on the treatment conditions of the as-cast specimens, i.e., no addition, a Sr addition and a (Ti-B)+Sr addition, the tensile strength levels of the as-cast specimens were 182, 192, and 204MPa, respectively. The corresponding strengths of T6 heat-treated specimens were 293, 308, and 318MPa. Elongations of the as-cast specimens were 2.2, 3.1, and 5.6%, and the corresponding elongations of the T6 heat-treated specimens were 4.6, 6.1, and 7.6%. The percentage of the reduced section area in the tensile specimens was also increased by the Sr and (Ti-B) additives. Sr and (Ti-B) additives changed the microstructure and the distribution of defects in the castings, resulting in an improvement of the tensile properties of AC4A aluminum alloys. According to our test results, recycled (35% scrap content) AC4A aluminum alloy met all of the KS requirements of the tensile strength and elongation values of AC4A aluminum alloy except for the elongation value of the one specimen condition, in this case the as-cast no-addition condition.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.21-28
• /
• 2019

This study was conducted to determine the carbon (C) and nitrogen (N) response of litterfall components as affected by N addition in compound fertilizer in a Korean red pine (Pinus densiflora S. et Z.) stand in southern Korea. Litterfall in a mature red pine stand was collected for two years following compound fertilizer application ($N_3P_4K_1$; $P_4K_1$) and no fertilization (control). The C concentration of litterfall components was not significantly (P > 0.05) different between the $N_3P_4K_1$ and the control plots, whereas the N concentration of the litterfall components was significantly higher in the $N_3P_4K_1$ plot than in the control plot. The $N_3P_4K_1$ and $P_4K_1$ additions induced a lower C/N ratio of litterfall components compared with the control plot. Annual C and N fluxes via litterfall components were not affected by the $N_3P_4K_1$ addition over the study period, except for reproduction litter. Annual N fluxes via reproduction litter were significantly higher in the $N_3P_4K_1$ plot than in the control plot. Thus, the $N_3P_4K_1$ and $P_4K_1$ additions could modify differently nutrient distribution of the forest floor and mineral soils in a red pine stand. These results indicate that N concentration and C/N ratio in litterfall components are more susceptible to fertilizer application than the C response in litterfall components.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.11
• /
• pp.1699-1704
• /
• 2007

This experiment was carried out to evaluate the effects of adding encapsulated-glucose, glucose, sorbic acid or prefermented juice of epiphytic lactic acid bacteria (FJLB) on the fermentation quality and residual mono- and disaccharide composition of Italian ryegrass (Lolium multiflorum Lam) silages. The additive treatments were as follows: (1) control (no addition), (2) encapsulated-glucose addition at 0.5% for glucose, (3) glucose addition at 1%, (4) sorbic acid addition at 0.1%, (5) FJLB addition at a theoretical application rate of $2.67{\times}10^5$ CFU (colony forming unit) $g^{-1}$, on a fresh weight basis of Italian ryegrass. Although control and encapsulated-glucose treatments had higher contents of butyric acid (33.45, 21.50 g $kg^{-1}$ DM) and ammonia-N/Total nitrogen (114.91, 87.01 g $kg^{-1}$) as compared with the other treated silages, the fermentation in all silages was clearly dominated by lactic acid. This was well indicated by the low pH (4.38-3.59), and high lactic acid/acetic acid (4.39-22.97) and lactic acid content (46.85-121.76 g $kg^{-1}$ DM). Encapsulated-0.5% glucose and glucose addition increased lactic acid/acetic acid, and significantly (p<0.05) decreased ammonia-N/total nitrogen, and the contents of butyric acid and total volatile fatty acids (VFAs) as compared with the control. However, there were higher butyric acid and lower residual mono-and di-saccharides on the two treatments as compared with sorbic acid and FJLB addition, and their utilization efficiency of water soluble carbohydrates (WSC) was lower than that of both sorbic acid and FJLB additions. Sorbic acid addition showed the lowest content of ethanol and ammonia-N/total nitrogen, and the highest content of residual fructose and total mono-and disaccharides as well as the higher lactic acid/acetic acid value. Sorbic acid addition decreased the loss of mono-and disaccharides, and inhibited the activity of clostridial and other undesirable bacteria, and greatly increased the utilization efficiency of fermentable substrates by epiphytic LAB. FJLB addition had the lowest pH value and the highest lactic acid content among all additive treatments, with the most intensive lactic acid fermentation occurring in FJLB treated silage. This resulted in the faster accumulation of lactic acid and faster pH reduction. Sorbic acid and FJLB addition depressed clostridia or other undesirable bacterial fermentation which decreased the WSC loss and saved the fermentable substrate for lactic acid fermentation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.3
• /
• pp.137-144
• /
• 2001

The quality including in situ degradability in the rumen of Holstein of the orchardgrass silage added with apple pomace was investigated in this study. The amount of apple pomace added in different treatments were 0, 20, 40 and 60% respectively. With higher amount of addition of apple pomace to orchardgrass, ADF, NDF and crude ash contents decreased significantly (p<0.05). Crude protein contents in the silages (11.8- 12.9%) were similar to that of 100% orchardgrass silage. Moisture contents increased according to the higher proportion of apple pomace in the silages. On the contrary to moisture content, pH was lower in 40-60% addition of apple pomace (3.7-3.9) than that of 100% orchardgrass silage (4.7). However the contents of lactic acid (1.7-2.5%), acetic acid (1.3- 1.7%) and total organic acid (2.9-4.2%) significantly increased according to higher levels of addition of apple pomace compared to the respective values of 100% orchardgrass silage (1.1%, 0.6% 1.7%). In siru disappearance rates of dry matter and NDF in the rumen were significantly higher at the stages of incubation after 24h in 40-60% addition of apple pomace than in 100% orchardgrass silage. No statistical differences were observed with quickly degradable fraction (a) and slowly degradable fraction (b) in the disappearance rates of dry matter and NDF. However, fractional rate of disappearance (c) and effective degradability (ED, k=0.08) for dry matter and NDF were significantly higher in 20-60% addition of apple pomace as 0.0076-0.0079 and 0.0099-0.0130. and 39.3-41.7% and 18.4- 20.6% respectively than the respective values of 0.0054 and 0.0064, and 36.8 and 16.5% of 100% orchardgrass silage. (Key words : Orchardgrass silage. Apple pomace. Lactic acid, In Situ Degradability. Effective degradability)

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.80-83
• /
• 2000

The quality characteristics of bread processed with the addition of roasted safflower seed powder were evaluated Safflower seed powder was roasted at 180$^{\circ}C$ for 20 min and pulverized below 45mesh size. Bread was processed by addition of control, 1, 2, 3 and 4% safflower seed powder at basic formulation. Dough raising power was increased as the addition of safflower seed powder increase, but Hunter's L value was decreased, From the sensory evaluation of safflower seed bread, color score was decreased significantly as the addition of roaste safflower seed powder increase, but overall acceptance had no significantly difference between control and added 4% of safflower seed.

• Korean Journal of Animal Reproduction
• /
• v.11 no.1
• /
• pp.73-84
• /
• 1987

This experiment was carried out to investigate the effects of hormone addition(FSH, HCG, estrogen and progesterone) and composition (BSA and FCS) of mKRB on the in vitro maturation and fertilizability of follicular oocytes of the Korean native cattle. The ovaries were removed at a slaughterhouse, returned to laboratory in a thermostat (30-35$^{\circ}C$) within 4 hr, and collected by aspirating normal follicles which had diameters of 1 to 6 mm. The oocytes with cumulus cells were cultured for 8, 16, 24 and 30 hr in a modified KRB solution containing BSA or FCS and hormones. The in vitro matured oocytes in mKRB containing FCS, FSH and steroids were transferred in the rabbit uterus for examination of their in vivo fertilizability with bovine sperm preincubated 4 to 6 hr in the rabbit uterus. 1. The mean number of oocytes collected per cattle was 6.5 from 1-3mm follicles, 1.3 from 4-6mm follicles, and total was 7.7. 2. The meiotic division at 16hr-cuture in the oocytes from 1-3mm follicles was slightly stimulated by the addition of FSH in mKRB + BSA solution compared with the control. At 30hr-culture, their maturation rates(%Met II) were also increased by FSH of 1 $\mu\textrm{g}$/ml(38.4%) and 5$\mu\textrm{g}$/ml(35.7%) as compared with the control (21.4%). The maturation rate at 30hr-culture in the oocytes from 4-6mm follicles was 53.8% and 57.1% by the FSH addition of 1$\mu\textrm{g}$/ml and 5$\mu\textrm{g}$/ml, respectively. These rates were similar with the control(57.1%), but higher than those of oocytes from 1-3mm follicles. 3. The meiotic division at 16hr-culture in the oocytes from 1-3mm follicles was stimulated by the HCG addition of 1IU/ml and 5IU/ml. However, the maturation rate at 30hr-culture was greatly decreased by the HCG addtion (26.6% and 13.3%) compared with the control(53.3%) and these rates (30.8%) in the oocytes from 4-6mm follicles were also lower than that fo the control(58.3%). 4. Low maturation rate (37.5%) of the oocytes cultured in mKRB containing BSA and 5IU/ml HCG was increased (55.0%) when 15% FCS with HCG was added to mKRB instead of BSA. 5. When 16hr-cultured oocytes in mKRB containing BSA and gonadotropins (5$\mu\textrm{g}$/ml FSH and 5IU/ml HCG) were transferred in the medium without gonadotropins and recultured for 16hr, the maturation rate of HCG-treated oocytes was greatly improved. 6. The maturation rates of oocytes were greatly affected by steroids. The combined addition of FCS+FSH+estrogen or +progesterone to mKRB increased the maturation rate compared with the combination of BSA+FSH or FCS+FSH in mKRB. 7. The fertilization rate, presence of pronuclei, was increased by the combination of FCS+FSH+p in mKRB as compared with that (5.6%) of BSA+FSH and the rates of FCS+FSH+steroids ranged from 12.5 to 17.6%.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.3
• /
• pp.106-113
• /
• 1988

This study was performed to obtain the basic data which can be applied to use of foamihg mortars. 1. At the mixing ratio 1:1, the highest strengths were showed by foaming mortam, respec - tively. But, it. gradually was decreased in poorer mixing ratio and more addition of foam- ing agent. The decreasing rates of strengths were incresed in poorer mixing ratio and more addition of foaming agent. 2. The strengths were decreased up to 77.0-92.8% by mix-foaming type and 36.7-74.4% by pre-foamed type than cement mortar. 3. At the mixing ratio of 1:1, the lowest air contents were showed by foaming mortars, respectively. But, it gradually was increased in poorer mixing ratio and more addition of foaming agent. The increasing rates of air contents were increased in richer mixing ratio and more addition of foaming agent. 4. Air contents were showed up to 26.0-63.8 times by mix-foaming type and 5.8-17.7 times by pre-foamed type than cement mortar, respectively. 5. The correlations between compressive strength and air content were highly significant, respectively. The multiple regression equations of strengths and air content were computed depending on a fuction of mixing ratio and addition of foarning agent. It was highly significant, respectively.